Get Instrumentcluster Guide for Toyota Corolla 4 Door Eleventh generation (2013-2017)

71

Instrument cluster

2

2.

Instrument cluster

Warning lights and

indicators .......................... 72

Gauges and meters

(drive monitor display) ...... 77

Gauges and meters

(multi-information

display) ............................. 82

Eco Driving Indicator........... 89

COROLLA_TMMMS_TMMC_U (OM12F00U)

72

2. Instrument cluster

Warning lights and indic ators

The warning lights and indicators on the instrument cluster and

center panel inform the driver of the status of the vehicle’s vari-

ous systems.

For the purpose of explanation, the following illustration dis-

plays all warning lights and indicators illuminated.

 Vehicles with a drive monitor display

 Vehicles with a multi-information display

The units used on the meters and some indicators may differ depending on

the target region.

COROLLA_TMMMS_TMMC_U (OM12F00U)

73

2. Instrument cluster

Warning lights

Warning lights inform the driver of malfunctions in the indicated vehi-

cle’s systems.

1

*

1

*

Brake system warning

ABS warning light

light (P. 491)

(P. 492)

(U.S.A.)

1

*

1

*

2

Brake system warning

ABS warning light

light (P. 491)

(P. 492)

(Canada)

Electric power steering

system warning light

(P. 492)

1, 2

1

*

Charging system warn-

ing light (P. 491)

1, 2

2, 4

*

Low engine oil pressure

Cruise control indicator

warning light (P. 491)

light (P. 493)

(Yellow)

1

*

Malfunction

lamp (P. 492)

indicator

Slip indicator (P. 492)

(U.S.A.)

1

*

2, 3

*

Malfunction

Smart key system indi-

lamp (P. 492)

cator light (P. 492)

(Canada)

(Yellow)

High engine coolant

1, 2

2

*

Open door warning light

(P. 493)

temperature

warning

light (P. 491)

1

*

SRS warning light

Low fuel level warning

(P. 492)

light (P. 493)

COROLLA_TMMMS_TMMC_U (OM12F00U)

74

2. Instrument cluster

Low windshield washer

fluid warning light

(P. 493)

2

*

Seat belt reminder light

(P. 493)

1

*

1, 2

*

Maintenance

required

Tire pressure warning

reminder light (P. 494)

light (P. 493)

(U.S.A.)

1, 2

*

Master warning light

(P. 493)

*¹: Vehicles without a smart key system:

These lights turn on when the engine switch is turned to the “ON” position

to indicate that a system check is being performed. They will turn off after

the engine is started, or after a few seconds. There may be a malfunction

in a system if a light does not come on, or if the lights do not turn off. Have

the vehicle inspected by your Toyota dealer.

Vehicles with a smart key system:

These lights turn on when the engine switch is turned to IGNITION ON

mode to indicate that a system check is being performed. They will turn off

after the engine is started, or after a few seconds. There may be a mal-

function in a system if a light does not come on, or if the lights do not turn

off. Have the vehicle inspected by your Toyota dealer.

*²: If equipped

*³: The light flashes in yellow to indicate a malfunction. The light flashes

quickly in green to indicate that the steering lock has not been released.

*⁴: The light comes on in yellow to indicate a malfunction.

COROLLA_TMMMS_TMMC_U (OM12F00U)

75

2. Instrument cluster

Indicators

The indicators inform the driver of the operating state of the vehicle’s

various systems.

2

*

Turn signal indicator

Cruise control indicator

(P. 182)

(P. 197)

(Green)

2

*

2

*

2

Headlight indicator

“ECO MODE” indicator

(P. 184)

(P. 175)

(U.S.A.)

2

*

1, 3

*

Tail light indicator

Slip indicator (P. 212)

(P. 184)

(Canada)

1

*

Headlight high beam

VSC OFF indicator

indicator (P. 184)

(P. 213)

2

*

2

*

Front fog light indicator

Smart key system indi-

(P. 191)

cator (P. 164)

(Green)

2

*

1, 5

*

Sport mode indicator

“AIR BAG ON/OFF” indi-

(P. 177)

cator (P. 46)

1, 2, 4

2

5

*

Eco Driving Indicator

Light (P. 89)

Cruise control “SET”

indicator (P. 197)

1

*

“TRAC OFF” indicator

Security indicator

(P. 212)

(P. 66, 68)

COROLLA_TMMMS_TMMC_U (OM12F00U)

76

2. Instrument cluster

*¹: Vehicles without a smart key system:

These lights turn on when the engine switch is turned to the “ON” position

to indicate that a system check is being performed. They will turn off after

the engine is started, or after a few seconds. There may be a malfunction

in a system if a light does not come on, or if the lights do not turn off. Have

the vehicle inspected by your Toyota dealer.

Vehicles with a smart key system:

These lights turn on when the engine switch is turned to IGNITION ON

mode to indicate that a system check is being performed. They will turn off

after the engine is started, or after a few seconds. There may be a mal-

function in a system if a light does not come on, or if the lights do not turn

off. Have the vehicle inspected by your Toyota dealer.

*²: If equipped

*³: The light flashes to indicate that the system is operating.

*⁴: The light does not turn on when the system is disabled.

*⁵: This light illuminates on the center panel.

CAUTION

■If a safety system warning light does not come on

Should a safety system light such as the ABS and SRS warning lights not

come on when you start the engine, this could mean that these systems are

not available to help protect you in an accident, which could result in death

or serious injury. Have the vehicle inspected by your Toyota dealer immedi-

ately if this occurs.

COROLLA_TMMMS_TMMC_U (OM12F00U)

77

2. Instrument cluster

Gauges and m eters (drive m onitor display)

The displayed content may differ depending on the type of

meter.

2

Tachometer

1

Displays the engine speed in revolutions per minute.

Speedometer

2

Fuel gauge

3

Drive monitor display

4

The drive monitor display presents the driver with a variety of driving-

related data including the current outside air temperature.

COROLLA_TMMMS_TMMC_U (OM12F00U)

78

2. Instrument cluster

Drive monitor display

Engine coolant temperature

1

gauge

Displays the engine coolant tem-

perature.

Eco Driving Indicator Zone Dis-

2

play* (P. 90)

Outside temperature display

3

(P. 404)

Shift position and gear position indicator* (P. 172, 174, 176)

4

Trip information (P. 79)

5

*: Except vehicles with a manual transmission

Instrument panel light control

When the tail lights are on, the brightness of the instrument panel

lights can be adjusted. (On vehicles with an automatic light control

system, the instrument panel lights can be adjusted when the sur-

rounding area is dark and the tail lights are on.)

The brightness of the clock light can be adjusted regardless of

whether the tail lights are on or off.

Brighter

1

Darker

2

COROLLA_TMMMS_TMMC_U (OM12F00U)

79

2. Instrument cluster

Trip information

■ Switching the display

Items

displayed

can

be

switched by pressing the

“DISP” switch.

2

■ Odometer

Displays the total distance the vehicle has been driven.

Except vehicles with a manual transmission: Press and hold the “DISP”

switch to change the display to the Eco Driving Indicator Light customi-

zation screen. (P. 80)

■ Trip meter A*/trip meter B*

Displays the distance the vehicle has been driven since the meter

was last reset. Trip meters A and B can be used to record and dis-

play different distances independently.

■ Current fuel consumption

Displays the current rate of fuel consumption.

Use the displayed current fuel consumption as a reference.

■ Average fuel consumption*

Displays the average fuel consumption since the function was

reset.

• Use the displayed average fuel consumption as a reference.

• Except vehicles with a manual transmission: While the average fuel

consumption is being displayed, the Eco Driving Indicator Zone Display

is displayed.

COROLLA_TMMMS_TMMC_U (OM12F00U)

80

2. Instrument cluster

■ Driving range

Displays the estimated maximum distance that can be driven with

the quantity of fuel remaining.

• This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

• When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

■ Average vehicle speed

Displays the average vehicle speed since the engine was last

started.

*: Press and hold the “DISP” switch to reset.

Eco Driving Indicator Light customization (except vehicles with

a manual transmission)

Eco Driving Indicator Light can be

activated or deactivated.

1

While the odometer is being

displayed, press and hold the

“DISP” switch to display the

Eco Driving Indicator Light cus-

tomization screen.

2

Press the “DISP” switch to set

Eco Driving Indicator Light to on

or off.

3

Press and hold the “DISP”

switch to complete the setting.

COROLLA_TMMMS_TMMC_U (OM12F00U)

81

2. Instrument cluster

■The meters and display illuminate when

 Vehicles without a smart key system

The engine switch is in the “ON” position.

 Vehicles with a smart key system

The engine switch is in IGNITION ON mode.

■When disconnecting and reconnecting battery terminals

The following information data will be reset:

●Average fuel consumption

●Driving range

2

●Average vehicle speed

CAUTION

■The display at low temperatures

Allow the interior of the vehicle to warm up before using the display. At

extremely low temperatures, the display monitor may respond slowly, and

display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or injury.

■Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that

the vehicle is parked in a place with adequate ventilation. In a closed area

such as a garage, exhaust gases including harmful carbon monoxide (CO)

may collect and enter the vehicle. This may lead to death or a serious

health hazard.

NOTICE

■To prevent damage to the engine and its components

●Do not let the indicator needle of the tachometer enter the red zone, which

indicates the maximum engine speed.

●The engine may be overheating if the high engine coolant temperature

warning light comes on. In this case, immediately stop the vehicle in a safe

place, and check the engine after it has cooled completely. (P. 536)

COROLLA_TMMMS_TMMC_U (OM12F00U)

82

2. Instrument cluster

Gauges and m eters (m ulti-inform ation dis-

play)

The displayed content may differ depending on the type of

meter.

Tachometer

1

Displays the engine speed in revolutions per minute.

Speedometer

2

Fuel gauge

3

Multi-information display

4

The multi-information display presents the driver with a variety of driving-

related data including the current outside air temperature.

Display change button

5

Switches the trip information.

Engine coolant temperature gauge

6

Displays the engine coolant temperature.

COROLLA_TMMMS_TMMC_U (OM12F00U)

83

2. Instrument cluster

Multi-information display

Outside temperature display

1

(P. 404)

Driving monitor (P. 84)

2

Warning messages (P. 503)

3

Eco Driving Indicator Zone Dis-

4

play* (P. 90)

Trip information (P. 84)

5

2

Shift position and gear position

6

indicator* (P. 172, 174, 176)

*: Except vehicles with a manual

transmission

Instrument panel light control

When the tail lights are on, the brightness of the instrument panel

lights can be adjusted. (On vehicles with an automatic light control

system, the instrument panel lights can be adjusted when the sur-

rounding area is dark and the tail lights are on.)

The brightness of the clock light can be adjusted regardless of

whether the tail lights are on or off.

Brighter

1

Darker

2

COROLLA_TMMMS_TMMC_U (OM12F00U)

84

2. Instrument cluster

Trip information

■ Switching the display

Items displayed can

be

switched by pressing the dis-

play change button.

■ Odometer

Displays the total distance the vehicle has been driven.

■ Trip meter A/trip meter B

Displays the distance the vehicle has been driven since the meter

was last reset. Trip meters A and B can be used to record and dis-

play different distances independently.

Press and hold the display change button to reset.

Driving monitor

■ Switching the display

Items

displayed

can

be

switched by pressing the

“DISP” switch.

■ Average fuel consumption

Displays the average fuel consumption since the function was

reset.

• Press and hold the “DISP” switch to reset when the average fuel con-

sumption is displayed.

• Use the displayed average fuel consumption as a reference.

■ Current fuel consumption

Displays the current rate of fuel consumption.

Use the displayed current fuel consumption as a reference.

COROLLA_TMMMS_TMMC_U (OM12F00U)

85

2. Instrument cluster

■ Driving range

Displays the estimated maximum distance that can be driven with

the quantity of fuel remaining.

• This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

• When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

2

■ Average vehicle speed

Displays the average vehicle speed since the engine was last

started.

■ Elapsed time

Displays the elapsed time since the engine was started.

■ Customization

Language and Eco Driving Indicator Light settings can be changed.

(P. 86)

■ Eco Driving Indicator Zone Display (except vehicles with a

manual transmission)

P. 90

COROLLA_TMMMS_TMMC_U (OM12F00U)

86

2. Instrument cluster

Customizing vehicle features

It is possible to customize the language and Eco Driving Indicator

Light settings using the “DISP” switch.

When customizing vehicle features, ensure that the vehicle is parked

in a safe place with the shift the shift lever to P (continuously variable

transmission) or N (manual transmission) and the parking brake set.

1

Press the “DISP” switch to

display the setting screen

while the vehicle is stopped,

and then press and hold the

“DISP” switch to display the

customize mode screen.

2

Press the “DISP” switch to

select the item to be set, then

press and hold the “DISP”

switch.

3

Press the “DISP” switch to

select the desired setting,

and then press and hold the

“DISP” switch.

To go back to the previous screen or exit the customize mode, press

the “DISP” switch to select “EXIT”, and then press and hold the

“DISP” switch.

COROLLA_TMMMS_TMMC_U (OM12F00U)

87

2. Instrument cluster

■ Items that can be changed

Function Default setting

Language

Customized setting

French

English

Spanish

ECO Driving Indicator

^Light*

ON (Self-lighting)

OFF

*: Except vehicles with a manual transmission

2

■The meters and display illuminate when

 Vehicles without a smart key system

The engine switch is in the “ON” position.

 Vehicles with a smart key system

The engine switch is in IGNITION ON mode.

■When disconnecting and reconnecting battery terminals

The following information data will be reset:

●Driving range

●Average vehicle speed

●Elapsed time

●Average fuel consumption

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of liquid crystal displays, and there is no problem continuing to

use the display.

■Setting display automatic suspension

In the following situations, the setting display will be suspended.

●When a message appears.

●When the vehicle begins to move.

COROLLA_TMMMS_TMMC_U (OM12F00U)

88

2. Instrument cluster

CAUTION

■The display at low temperatures

Allow the interior of the vehicle to warm up before using the display. At

extremely low temperatures, the display monitor may respond slowly, and

display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or injury.

■Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that

the vehicle is parked in a place with adequate ventilation. In a closed area

such as a garage, exhaust gases including harmful carbon monoxide (CO)

may collect and enter the vehicle. This may lead to death or a serious

health hazard.

NOTICE

■To prevent damage to the engine and its components

●Do not let the indicator needle of the tachometer enter the red zone, which

indicates the maximum engine speed.

●The engine may be overheating if the engine coolant temperature gauge

are in the red zone. In this case, immediately stop the vehicle in a safe

place, and check the engine after it has cooled completely. (P. 536)

COROLLA_TMMMS_TMMC_U (OM12F00U)

89

2. Instrument cluster

Ec o Driving Indic ator (exc ept vehicles w ith

a manual transm ission)

Eco Drive Indicator Light

During Eco-friendly acceleration

 Drive monitor display

operation (Eco driving), Eco Driv-

ing Indicator Light will turn on.

When the acceleration exceeds

Zone of Eco driving, and when the

vehicle is stopped, the light turns

off.

2

 Multi-information display

COROLLA_TMMMS_TMMC_U (OM12F00U)

90

2. Instrument cluster

Eco Drive Indicator Zone Display

Suggests Zone of Eco driving with

current Eco driving ratio based on

acceleration.

 Drive monitor display

Eco driving ratio based on

1

acceleration

If the acceleration exceeds Zone of

Eco driving, the right side of Eco

Driving Indicator Zone Display

blinks.

 Multi-information display

Zone of Eco driving

2

Eco Driving Indicator Light customization

 Drive monitor display

(P. 80)

 Multi-information display

(P. 86)

■Operation of Eco Driving Indicator

Eco Driving Indicator will not operate in the following conditions:

●The shift lever is in any position other than D.

^{●Paddle shift switch}* is operated.

●Sport mode* is selected.

●The vehicle speed is approximately 80 mph (130 km/h) or higher.

*: If equipped

COROLLA_TMMMS_TMMC_U (OM12F00U)

Instrumentcluster for Your Toyota Corolla 4 Door Eleventh generation (2013-2017)

Related Topics

Popular Owner Manuals

Latest Owner Manuals