Get Instrumentcluster -> Gauges and meters (drive monitor display) Guide for Toyota Corolla 4 Door Eleventh generation (2013-2017)

77

2. Instrument cluster

Gauges and m eters (drive m onitor display)

The displayed content may differ depending on the type of

meter.

2

Tachometer

1

Displays the engine speed in revolutions per minute.

Speedometer

2

Fuel gauge

3

Drive monitor display

4

The drive monitor display presents the driver with a variety of driving-

related data including the current outside air temperature.

COROLLA_TMMMS_TMMC_U (OM12F00U)

78

2. Instrument cluster

Drive monitor display

Engine coolant temperature

1

gauge

Displays the engine coolant tem-

perature.

Eco Driving Indicator Zone Dis-

2

play* (P. 90)

Outside temperature display

3

(P. 404)

Shift position and gear position indicator* (P. 172, 174, 176)

4

Trip information (P. 79)

5

*: Except vehicles with a manual transmission

Instrument panel light control

When the tail lights are on, the brightness of the instrument panel

lights can be adjusted. (On vehicles with an automatic light control

system, the instrument panel lights can be adjusted when the sur-

rounding area is dark and the tail lights are on.)

The brightness of the clock light can be adjusted regardless of

whether the tail lights are on or off.

Brighter

1

Darker

2

COROLLA_TMMMS_TMMC_U (OM12F00U)

79

2. Instrument cluster

Trip information

■ Switching the display

Items

displayed

can

be

switched by pressing the

“DISP” switch.

2

■ Odometer

Displays the total distance the vehicle has been driven.

Except vehicles with a manual transmission: Press and hold the “DISP”

switch to change the display to the Eco Driving Indicator Light customi-

zation screen. (P. 80)

■ Trip meter A*/trip meter B*

Displays the distance the vehicle has been driven since the meter

was last reset. Trip meters A and B can be used to record and dis-

play different distances independently.

■ Current fuel consumption

Displays the current rate of fuel consumption.

Use the displayed current fuel consumption as a reference.

■ Average fuel consumption*

Displays the average fuel consumption since the function was

reset.

• Use the displayed average fuel consumption as a reference.

• Except vehicles with a manual transmission: While the average fuel

consumption is being displayed, the Eco Driving Indicator Zone Display

is displayed.

COROLLA_TMMMS_TMMC_U (OM12F00U)

80

2. Instrument cluster

■ Driving range

Displays the estimated maximum distance that can be driven with

the quantity of fuel remaining.

• This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

• When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

■ Average vehicle speed

Displays the average vehicle speed since the engine was last

started.

*: Press and hold the “DISP” switch to reset.

Eco Driving Indicator Light customization (except vehicles with

a manual transmission)

Eco Driving Indicator Light can be

activated or deactivated.

1

While the odometer is being

displayed, press and hold the

“DISP” switch to display the

Eco Driving Indicator Light cus-

tomization screen.

2

Press the “DISP” switch to set

Eco Driving Indicator Light to on

or off.

3

Press and hold the “DISP”

switch to complete the setting.

COROLLA_TMMMS_TMMC_U (OM12F00U)

81

2. Instrument cluster

■The meters and display illuminate when

 Vehicles without a smart key system

The engine switch is in the “ON” position.

 Vehicles with a smart key system

The engine switch is in IGNITION ON mode.

■When disconnecting and reconnecting battery terminals

The following information data will be reset:

●Average fuel consumption

●Driving range

2

●Average vehicle speed

CAUTION

■The display at low temperatures

Allow the interior of the vehicle to warm up before using the display. At

extremely low temperatures, the display monitor may respond slowly, and

display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or injury.

■Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that

the vehicle is parked in a place with adequate ventilation. In a closed area

such as a garage, exhaust gases including harmful carbon monoxide (CO)

may collect and enter the vehicle. This may lead to death or a serious

health hazard.

NOTICE

■To prevent damage to the engine and its components

●Do not let the indicator needle of the tachometer enter the red zone, which

indicates the maximum engine speed.

●The engine may be overheating if the high engine coolant temperature

warning light comes on. In this case, immediately stop the vehicle in a safe

place, and check the engine after it has cooled completely. (P. 536)

COROLLA_TMMMS_TMMC_U (OM12F00U)

Instrumentcluster -> Gauges and meters (drive monitor display) for Your Toyota Corolla 4 Door Eleventh generation (2013-2017)

Related Topics

Instrumentcluster

Popular Owner Manuals

Latest Owner Manuals