OPERATION OF INSTRUMENTS AND CONTROLS Audio system -> Compact disc player operation (Type 1 and Type 2) for Your Toyota Prius 4 Door Second Generation (2004-2009)

Compact disc player operation  
(Type 1 and Type 2)  
(a) Inserting or ejecting compact disc  
Type 1:  
Setting all the discs:  
NOTICE  
1. Push the “LOAD” button until you  
hear a beep.  
Do not insert one disc stacked on top  
of another one or feed them in con-  
tinuously, to prevent discs from get-  
ting stuck in the player.  
Setting a single compact disc:  
1. Push the “LOAD” button briefly.  
The amber indicators at both ends of the  
slot blinking. The amber blinking indicators  
change to continuous green illumination.  
The amber indicators at both ends of the  
slot blinking. The amber blinking indicators  
change to continuous green illumination.  
2. Insert only one disc.  
The amber indicators blink.  
2. Insert only one disc.  
3. Insert the next disc after the amber  
blinking indicators change to contin-  
uous green illumination.  
You can set a disc at the lowest empty  
disc number.  
After insertion, the set disc is automatical-  
ly loaded.  
4. Repeat this procedure until you in-  
sert all the discs.  
If the label faces down, the disc cannot  
be played. In this case, “CD CHECK” ap-  
pears on the display.  
To cancel the operation, push the “LOAD”  
button.  
Your automatic changer can store up to 6  
discs.  
If you need to insert the next disc, repeat  
the same procedure to insert another disc.  
If you do not insert the discs within 15  
seconds after pushing the “LOAD” button,  
the operation will be canceled automatical-  
ly.  
266  
Ejecting a single alone:  
The numbers of the trays where the com-  
pact disc is not set are dimmed.  
(b) Playing a compact disc  
Type 1:  
1. Touch the switch (1−6) to highlight  
the disc number you want to eject.  
Type 2:  
Push the “DISC·AUX” button if the disc  
is already loaded in the player.  
When you insert a disc, the player will  
automatically start. To eject the disc,  
2. Push the “  
” button for the com-  
“CD CHANGER” appears on the display.  
pact disc briefly.  
push the “  
” button.  
The discs set in the player are played  
continuously, starting with the last disc  
you inserted. The disc number of the disc  
currently being played, the track number  
and the time from the beginning of the  
program are shown on the display.  
At this time, the amber indicators of the  
slot start blinking.  
Ejecting all the discs:  
Push the “  
” button for the compact  
disc until you hear a beep.  
When play of one disc ends, the first  
track of the following disc starts. When  
play of the final disc ends, play of the  
first disc starts again.  
267  
The player will skip any empty disc trays.  
When the AUX adapter is in use, each  
time you push the “DISC·AUX” button, the  
audio switches the compact disc mode  
and AUX mode alternately. For details  
about AUX adapter, see page 306.  
Type 2:  
Push the “DISC·AUX” button if the disc  
is already loaded in the player.  
“CD” appears on the display.  
The discs set in the player are played  
continuously. The track number and the  
time from the beginning of the program  
are shown on the display.  
(c) Selecting a desired disc (Type 1 only)  
Touch the desired disc number.  
(d) Selecting a desired track  
“SEEK·TRACK” button:  
The selected disc number is highlighted in  
green.  
Push the “SEEK·TRACK” button. The play-  
er will start playing the selected track  
from the beginning.  
The player will start playing the selected  
disc from the first track.  
Track list screen:  
Touch the desired track displayed on the  
track list screen.  
The track list screen cannot be displayed  
while driving.  
For details about the track list screen, see  
”Displaying the track list” on page 270.  
268  
(e) Fast Forward/Reverse  
Push the “SEEK·TRACK” button and hold  
it to fast forward/reverse the disc. When  
you release the switch, the player will  
resume playing.  
When fast forwarding, if you reach the  
end of the final track, the player will go  
back to the start track and continue op-  
eration.  
When reversing, if you reach the begin-  
ning of the start track, reverse is can-  
celled, even if you continue to hold down  
the button.  
(f) Repeating the same track  
(h) Listening to the tracks in the disc  
you are listening to, in random or-  
der  
Touch the “RPT” switch briefly. When the  
track is finished, the player will automati-  
cally go back to the beginning of the track  
and play the track again. To cancel it,  
touch the “RPT” switch once again.  
Touch the “RAND” switch briefly, the sys-  
tem selects a track in the disc you are  
currently listening to. To cancel it, touch  
the “RAND” switch once again.  
(g) Repeating the same disc  
(i) Listening to the tracks in all the  
discs set, in random order  
Touch the “RPT” switch and hold it until  
you hear a beep. When the disc is fin-  
ished, the player will automatically go  
back to the beginning of the disc and play  
the disc again. To cancel it, touch the  
“RPT” switch once again.  
Touch the “RAND” switch and hold it until  
you hear a beep, the system selects a  
track in all the discs which are set and  
plays it. To cancel it, touch the “RAND”  
switch once again.  
269  
After all the discs are scanned in one  
pass, normal play resumes.  
(j) Searching for a desired track  
(l) Displaying the track list  
Touch the “SCAN” switch briefly, the play-  
er will play the next track for 10 seconds,  
then scan again. To select a track, touch  
the “SCAN” switch a second time.  
Touch the “TRACK LIST” switch.  
The track list screen will be displayed.  
If there are more than 6 tracks, touch “”  
or “” to change the page.  
After all the tracks are scanned in one  
pass, normal play resumes.  
If you touch a track, that track will be  
played.  
(k) Searching for a desired disc  
(Type 1 only)  
Only track names of 13 characters or less  
can be displayed. Furthermore, track  
names may not be displayed correctly or  
at all, depending on the recorded content.  
Touch the “SCAN” switch and hold it until  
you hear a beep, the track at the begin-  
ning of each disc will be played for 10  
seconds. To continue listening to the track  
of your choice, touch the “SCAN” switch  
a second time.  
270