OPERATION OF INSTRUMENTS AND CONTROLS Audio system -> Compact disc player operation (Type 3) for Your Toyota Prius 4 Door Second Generation (2004-2009)

Compact disc player operation  
(Type 3)  
(m) If the player malfunctions  
(a) Inserting or ejecting compact disc  
If the player or another unit equipped with  
the player malfunctions, your audio system  
will display the following error messages.  
When you insert a disc, the player will  
automatically start. To eject the disc,  
push the “  
” button.  
If “CD CHECK” appears on the display,  
it indicates that the disc is dirty, damaged  
or it was inserted up side down. Clean the  
disc or insert it correctly.  
If “CD ERROR” appears on the display,  
the following causes are possible.  
There is trouble inside the system.  
Eject the disc.  
The inside of the player unit may be  
too hot due to the very high ambient  
temperature. Eject the disc and allow  
the player to cool down.  
(b) Playing a compact disc  
Push the “DISC” button if the disc is  
already loaded in the player.  
“CD” appears on the display.  
If the malfunction is not rectified, take  
your vehicle to your Toyota dealer.  
The discs set in the player are played  
continuously. The track number and the  
time from the beginning of the program  
are shown on the display.  
271  
(c) Selecting a desired track  
(d) Searching for a desired track  
Touch the “SCAN” switch.  
(e) Other compact disc player functions  
“SEEK·TRACK” button: Use for direct  
“RPT” switch: Use it for automatic repeat  
access to a desired track.  
of the track you are currently listening to.  
“SCAN” will be highlighted in green. The  
compact disc player will play the next  
track for 10 seconds, then scan again.  
Push either side of the “SEEK·TRACK”  
button. The player will start playing the  
selected track from the beginning.  
Touch the switch while the track is play-  
ing. When the track is finished, the player  
will automatically go back to the beginning  
of the track and play the track again. To  
cancel it, touch the switch once again.  
To select  
a
track, touch the “SCAN”  
switch a second time. If the player reach-  
es the end of the disc, it will continue  
scanning at track 1.  
Fast forward: Touch the “  
” switch and  
hold it to fast forward the disc. When you  
release the switch, the compact disc play-  
er will resume playing from that position.  
After all the tracks are scanned in one  
pass, normal play resumes.  
Reverse: Touch the “  
” switch and hold  
it to reverse the disc. When you release  
the switch, the compact disc player will  
resume playing.  
272