OPERATION OF INSTRUMENTS AND CONTROLS Multi-information display -> Hands-free system for Your Toyota Prius 4 Door Second Generation (2004-2009)

Hands−free system  
BACKGROUND COLOR  
Hands−free system allows you to make  
or receive a call without taking your  
hands off the steering wheel by con-  
necting your cellular phone.  
Select the desired background color  
and touch “OK”.  
This system supports Bluetooth. Bluetooth  
is a wireless data system by which you  
can call without your cellular phone being  
connected with a cable or placed on a  
cradle.  
If your cellular phone does not support  
Bluetooth, this system cannot function.  
CAUTION  
Type 3  
While you are driving, do not use a  
cellular phone or connect the Blue-  
tooth phone.  
AUTOMATIC TRANSITION  
The function returning to the previous  
screen from the audio or air conditioner  
screen is selectable. Select “ON” or  
“OFF” and then touch “OK”.  
NOTICE  
Do not leave your cellular phone in  
the vehicle. The temperature indoor  
may be high and damage the phone.  
ON: The previous screen automatically re-  
turns from the audio or air condition-  
er screen 20 seconds after the end  
of audio or air conditioner screen op-  
eration.  
OFF:The audio or air conditioner screen  
remains on.  
171  
INFORMATION  
In the following conditions, the sys-  
tem may not function.  
D The cellular phone is turned off.  
D The current position is outside the  
communication area.  
D The cellular phone is not connected.  
D The cellular phone has a low bat-  
tery.  
By pushing the telephone button above,  
you can receive a call or hang up with-  
out taking your hands off the steering  
wheel.  
You can use the microphone above  
when talking on the phone.  
172  
The other party’s voice outputs from the  
driver’s speaker. When the received calls  
or received voice outputs, the audio from  
the audio system will be muted.  
2. Indicates the amount of battery  
charge left.  
Empty  
Full  
INFORMATION  
It is not displayed while the Bluetooth is  
connecting or the phone book data is be-  
ing transferred.  
D Talk alternately with the other party  
on the phone. If you talk at the  
same time, the voice may not reach  
The amount left does not always corre-  
spond with the one of your cellular phone.  
each other.  
tion.)  
(It is not a malfunc-  
This system does not have  
function.  
a
charging  
D Keep the volume of receiving voice  
down. Otherwise, echo is coming  
3. Indicates the receiving area.  
up. When you talk on the phone,  
speak clearly towards the micro-  
phone.  
1. Indicates the condition of Bluetooth  
connection.  
“Rm” is displayed when receiving in  
Roaming area.  
“Blue” indicates an excellent connection  
to Bluetooth.  
“Hm” is displayed when receiving in  
Home area.  
D In the following situations, your  
voice may not reach the other party.  
“Yellow” indicates  
a
bad connection to  
4. Indicates the level of reception.  
z Driving on unpaved road. (Mak-  
ing a traffic noise.)  
Bluetooth, resulting in possible deteriora-  
tion of voice quality.  
Too bad  
Excellent  
z Driving at the high speed.  
z The window is open.  
: no connection to Bluetooth.  
The level of reception does not always  
correspond with the one of your cellular  
phone.  
z Turning the air conditioning vents  
towards the microphone.  
z The sound of the air conditioning  
fan is loud.  
173  
An antenna for the Bluetooth connec-  
tion is built in the display. The indica-  
tion of the Bluetooth connection may  
turn yellow and the system may not  
function when you use the Bluetooth  
phone in the following conditions and  
places.  
When you release your vehicle:  
lot of personal data is registered  
when you use the hands−free system.  
When you release your vehicle, initial-  
ize your data.  
INFORMATION  
A
This system supports the following  
service.  
D HFP (Hands Free Profile) Ver. 1.0  
D OPP (Object Push Profile) Ver. 1.1  
If you initialize it, the former state will  
never come back again. Pay much atten-  
tion when initializing the data.  
ꢀ Your cellular phone is hiding behind the  
display (behind the seat or in the glove  
box and console box).  
If your cellular phone does not sup-  
port HFP, you cannot enter the Blue-  
tooth phone, and take OPP service  
individually.  
You can initialize the following data in the  
system.  
ꢀ Your cellular phone touches or is cov-  
ꢀ phone book data  
ered with metal materials.  
ꢀ dialed numbers and received calls  
ꢀ speed dial  
Leave the Bluetooth phone on the place  
where “Blue” indication is displayed.  
ꢀ Bluetooth phone data  
ꢀ security code  
Bluetooth is a trademark owned by Blue-  
tooth SIG. Inc.  
174  
(a) Entering a Bluetooth phone  
CAUTION: Radio Frequency Radiation  
Exposure  
FCC ID: BABBT003A  
IC ID: 2024B−BT003A  
MADE IN JAPAN  
To use the hands−free system, you  
need to enter your phone into the sys-  
tem. Once you have registered it, you  
can make a hands−free call.  
This equipment complies with FCC radi-  
ation exposure limits set forth for uncon-  
trolled equipment and meets the FCC  
radio frequency (RF) Exposure Guide-  
lines in Supplement C to OET65. This  
equipment has very low levels of RF  
energy that it deemed to comply without  
maximum permissive exposure evalua-  
tion (MPE). But it is desirable that it  
should be installed and operated with at  
least 20cm and more between radiator  
and person’s body (excluding extremi-  
ties; hands, wrists, feet and legs).  
This device complies with Part 15 of the  
FCC Rules and RSS−210 of the IC  
Rules. Operation is subject to the fol-  
lowing two conditions: (1) This device  
may not cause harmful interference, and  
(2) This device must accept any inter-  
ference received, including interference  
that may cause undesired operation.  
1. Push the “INFO” button to display  
the “Information” screen.  
CAUTION  
Co−location: This transmitter must not  
be co−located or operated in conjunction  
with any other antenna or transmitter.  
Changes or modifications not ex-  
pressly approved by the party respon-  
sible for compliance could void the  
user’s authority to operate the equip-  
ment.  
2. Touch the “Telephone” switch to dis-  
play “Telephone” screen.  
You can also push the  
button of the  
steering wheel to display this screen when  
the vehicle is stopped.  
175  
3. Touch the “Settings” switch to dis-  
play “Settings” screen.  
4. Touch the “Bluetooth” switch to dis-  
play the “Bluetooth Settings” screen.  
5. Touch the “Register” switch to con-  
nect your cellular phone to the sys-  
tem.  
176  
6. When this screen is displayed, input  
the Passkey displayed on the screen  
into the phone.  
7. When the connection is completed,  
this screen is displayed.  
When this screen is displayed, follow the  
guidance on the screen to try again.  
You do not need to enter the phone in  
case of using the same one.  
For the operation of the phone, see the  
manual that comes with your cellular  
phone.  
If you want to cancel it, touch “Cancel”.  
177  
ꢀ Connecting a Bluetooth phone  
(b) manually  
(a) automatically  
When the auto connection failed or  
turned off, you have to connect Blue-  
tooth manually.  
When the “ACC” or “IG−ON” mode is  
enabled, the selected Bluetooth phone  
will be automatically connected and the  
connection result is displayed.  
When you register your phone, auto  
connection will be turned on. Always  
set it to this mode and leave the Blue-  
tooth phone in a condition where con-  
nection can be established.  
This screen appears when the Bluetooth  
phone is first connected after the “ACC”  
or “IG−ON” mode is enabled.  
Touch the “Connect” switch after hav-  
ing enabled the Bluetooth connection  
on the phone.  
Each time you touch the “Auto Connect”  
switch, auto connection will be switched  
on or off.  
178  
ꢀ Reconnecting the Bluetooth phone  
(b) Calling on the Bluetooth phone  
If the Bluetooth phone is disconnected  
with a poor reception from the Blue-  
tooth network when the “ACC” or “IG−  
ON” mode is enabled, the system auto-  
matically reconnects the Bluetooth  
After you enter the Bluetooth phone,  
you can call by using hands−free sys-  
tem. You can call using the 7 methods  
described below.  
(i) By dial  
phone.  
In this case, the connection  
result is not displayed.  
You can call by inputting the telephone  
number.  
If the Bluetooth is disconnected on pur-  
pose such as you turned your cellular  
phone off, this does not happen. Recon-  
nect it by the following methods.  
This cannot be operated while you are  
driving.  
ꢀ Select the Bluetooth phone again.  
ꢀ Enter the Bluetooth phone.  
When the connection is completed, this  
screen is displayed.  
Now you can use the Bluetooth phone.  
Touch the desired key to input the tele-  
phone number.  
179  
Each time you touch “ꢁ”, an inputted  
digit is deleted.  
(ii) By phone book  
You can call by phone book data which  
is transferred from your cellular phone.  
When you touch “  
”, the number you  
called last is inputted.  
The system has one phone book. You  
can register up to 1000 numbers.  
Touch “  
” or push the  
button of the  
This cannot be operated while you are  
driving.  
steering wheel.  
2. Select the desired number from the  
list.  
Touch the desired key to input the tele-  
phone number.  
1. Touch the “Phone Book” switch to  
display “Phone Book” screen.  
180  
(iii) By dialed numbers  
You can call by dialed number.  
The  
system memorizes up to 5 dialed num-  
bers. If it is over 5, the oldest number  
is deleted.  
This cannot be operated while you are  
driving.  
ꢀ When you call by phone book, the  
Touch “  
” or push the  
button of the  
name (if registered) is displayed.  
steering wheel.  
ꢀ When you call the same number con-  
tinuously, only the newest number is  
registered.  
2. Select the desired number from the  
list.  
1. Touch the “Call Log” switch to dis-  
play “Outgoing Calls” screen.  
181  
(iv) By received calls  
You can call by received calls. When  
a call is received, the system memo-  
rizes up to 5 numbers. If it is over 5,  
the oldest number is deleted.  
This cannot be operated while you are  
driving.  
2. Touch the “Incoming Calls” switch to  
display “Incoming Calls” screen.  
Touch “  
” or push the  
button of the  
steering wheel.  
1. Touch the “Call Log” switch to dis-  
play.  
182  
(v) By speed dial  
You can call by registered telephone  
number which you selected from  
a
phone book, dialed numbers and re-  
ceived calls. (See page 191 for regis-  
tering the speed dial.)  
ꢀ When a telephone number registered in  
the phone book is received, the name  
and the number are displayed.  
Touch “  
” or push the  
button of the  
steering wheel.  
ꢀ An international phone call may not be  
made depending on the cellular phone  
which you have.  
ꢀ Received calls which you did not an-  
swer are also memorized in the system  
and “Abs.” is displayed on the left  
side of the number.  
1. Touch the “Speed Dial” switch to  
display “Speed Dial” screen.  
ꢀ Unnoticed telephone number such as a  
public telephone is not memorized in  
the system.  
3. Select the desired number from the  
list.  
183  
Example: Call Charlize  
(vi) By voice recognition  
2. Touch the desired number to call.  
You can change the page by touch-  
ing “Speed Dial 2” or “Speed Dial  
3”.  
You can call by giving a command. (For  
the operation and command of voice  
recognition, see “Speech Command  
System” on page 235 and “Help screen”  
on page 236.)  
When you push the telephone button while  
you are driving, the screen above ap-  
pears. Touch the desired name to call.  
(The telephone number is not displayed.)  
ꢀ Dialing by name  
You can call by giving a voice tag reg-  
istered in the phone book. For setting  
the voice recognition, see “Setting the  
voice recognition” on page 209.  
184  
You:  
Push the talk switch.  
Cancelling the voice recognition  
System: “After the beep, please say the  
name.”  
The voice recognition will be cancelled  
when you do the following.  
You:  
“Charlize.”  
ꢀ Keep on pushing the talk switch.  
System: “Charlize chosen, when ready,  
please briefly push the talk  
switch or push the off−hook  
switch to dial.”  
ꢀ Push the  
button of the steering  
wheel.  
ꢀ Touch the “Cancel” switch. (Except for  
recognizing the command)  
You:  
Push the talk switch.  
ꢀ Say “Cancel”.  
System: “After the beep, please say  
“Dial”.”  
You:  
“Dial.”  
“Next” is displayed when multiple entries  
are found for a searched name.  
System: “Dialing the name.”  
Now you can call Charlize.  
Up to 6 entries can be displayed including  
the first searched one.  
Do the following to change the entry to  
the next one.  
ꢀ Touch the “Next” switch.  
ꢀ Push the talk switch to say “Next Can-  
didate”.  
Calling without the voice recognition.  
After the entry number is displayed, you  
can also call by pushing the telephone  
button or touching the “Dial” switch.  
185  
ꢀ Dialing by phone number  
You:  
Push the talk switch.  
ꢀ Sending a tone  
You can call by giving a desired num-  
ber.  
System: “After the beep, please say the  
number.”  
You can send a tone by giving a de-  
sired number.  
You:  
“812387”  
System: “When ready, please briefly  
push the talk switch or push  
the off−hook switch to dial.”  
You:  
Push the talk switch.  
System: “After the beep, please continue  
to add numbers or say “Dial”.”  
You:  
“Dial.”  
System: “Dialing the number.”  
Now you can call 812387.  
You:  
System: “Say numbers, pound, or star.”  
You: “1234.”  
System: “1234.” “Push the talk switch.”  
You: Push the talk switch.  
System: “Send? Say Yes or No.”  
You: “Yes.”  
Push the talk switch.  
System: “Sending.”  
Now you can send the tone.  
186  
To adjust the volume of received call:  
Touch “–” or “+” or use the volume  
switch of the steering wheel.  
(vii) By POI call (with Navigation System)  
(c) Receiving on the Bluetooth  
phone  
On the international phone call, the other  
party’s name may not be displayed cor-  
rectly depending on the cellular phone  
which you have.  
You can call by touching “  
” when it  
is displayed on the screen from Naviga-  
tion system. (See the separate “Navi-  
gation System Owner’s Manual” for de-  
tails.)  
When a call is received, this screen is  
displayed with a sound. Touch “  
”
or push the  
button of the steering  
wheel to talk on the phone.  
To hang up the phone:  
Touch “  
” or push the  
button of  
the steering wheel again.  
To refuse to receive the call:  
Touch “  
” and hold it.  
187  
To input a Key:  
(d) Talking on the Bluetooth  
phone  
Touch the “0−9” switch.  
To transfer the call  
Touch the “Transfer Call” switch.  
You cannot change from hands−free call  
to cellular phone call while you are driv-  
ing.  
When you change from cellular phone call  
to hands−free call, the hands−free screen  
will be displayed and you can operate it  
on the screen.  
Transferring method and behavior are dif-  
ferent depending on the cellular phone  
which you have.  
Touch the desired number to input the  
key.  
For the operation of the phone, see the  
manual that comes with your cellular  
phone.  
To hang up the phone:  
While you are talking on the phone,  
this screen is displayed. You can do  
the operations below on the screen.  
Touch “  
” or push the  
button of  
the steering wheel.  
This cannot be operated while you are  
driving.  
To adjust the volume of the other party’s  
voice:  
Touch “–” or “+” or use the volume  
switch of the steering wheel.  
To hang up the phone:  
Touch the “  
button of the steering wheel  
To mute your voice:  
Touch the “Mute” switch.  
” switch or push the  
188  
You can do this operation when you want  
to operate an answering machine or use a  
telephone service in bank for example.  
You can register the phone number and  
the code number in the phone book.  
ꢀ Sending a tone by the speed tone  
You can send a tone by the speed tone.  
(For registering the speed tone, see  
“Registering the speed tone” on page  
194.)  
If the continuous tone signal is regis-  
tered in a phone book, this screen ap-  
pears. (If not registered, “Send” and  
“Exit” are not displayed.)  
Confirm the number displayed on the  
screen and touch “Send”. The number  
before marked sign will be sent.  
1. Touch the “Speed Tone” switch.  
When you touch “Exit”, this function will  
be finished and normal tone screen ap-  
pears.  
To hang up the phone:  
Touch “  
” or push the  
button of  
the steering wheel.  
The continuous tone signal is the marked  
sign (p or w) and the number following  
telephone number. (ex. 056133p0123w#1:)  
189  
(e) Changing the settings of the  
Bluetooth phone  
2. Touch the desired switch to send a  
tone.  
You can change the settings of the  
phone.  
Touch the “Settings” switch to display  
“Settings” screen.  
190  
(i) (a) Registering the speed dial  
You can register the desired telephone  
number from phone book, dialed num-  
bers and received calls.  
Up to 17  
speed dial numbers can be registered.  
The 6th entry is the speed dial for redial-  
ing.  
2. Touch the “Register” switch of  
“Speed Dial”.  
3. Select the data you want to register.  
1. Touch the “Speed Dial” switch to  
display the “Speed Dial Settings”  
screen.  
191  
4. Touch the desired telephone number.  
5. Touch the switch you want to regis-  
ter in.  
6. If you select a switch you registered  
before, this screen is displayed.  
The latest dialed number is registered in  
the 6th item (speed redial).  
Touch the “Yes” switch if you want to  
overwrite it.  
192  
ꢀ Deleting the speed dial individually  
You can delete “01”  
speed dial individually.  
−
“17” of the  
If you delete them all at once, all of 17  
numbers are deleted.  
2. Touch the switch you want to delete.  
3. Touch the “Yes” switch.  
1. Touch the “Delete” switch of “Speed  
Dial”.  
193  
ꢀ Deleting all of the speed dial  
(b) Registering the speed tone  
You can register the desired tone num-  
ber. Up to 6 speed tone numbers can  
be registered.  
2. Touch the “Yes” switch.  
1. Touch the “Delete All” switch of  
“Speed Dial”.  
1. Touch the “Register” switch of  
“Speed Tone”.  
194  
2. Use the software keyboard to input  
the name.  
3. Input the number and touch “OK”.  
4. Touch the desired switch you want  
to register in.  
195  
ꢀ Editing the speed tone.  
You can edit the speed tone.  
5. If you select a switch you registered  
before, this screen is displayed.  
Touch the “Yes” switch if you want  
to overwrite it.  
2. Touch the switch you want to edit.  
1. Touch the “Edit” switch of “Speed  
Tone”.  
196  
ꢀ Deleting the speed tone individually.  
You can delete “1” to “6” of the speed  
tone.  
If you delete them all at once, all of 6  
numbers are deleted.  
3. Use the software keyboard to input  
the name.  
4. Input the number and touch “OK”.  
1. Touch the “Delete” switch of “Speed  
Tone”.  
197  
ꢀ Deleting all the speed tone  
2. Touch the switch you want to delete.  
3. Touch the “Yes” switch.  
1. Touch the “Delete All” switch of  
“Speed Tone”.  
198  
(ii) Setting the volume  
2. Touch the “Yes” switch.  
2. Touch the “−” or “+” switch to ad-  
just the “Voice Volume” or “Ring  
Volume”.  
1. Touch the “Volume” switch to dis-  
play the “Volume Setting” screen.  
Voice Volume . . adjusting  
the  
other  
party’s voice.  
Ring Volume . . . adjusting the ring volume.  
199  
ꢀ Automatic volume settings for high  
ꢀ Initializing the settings  
speed  
You can initialize the settings.  
You can set the volume one step up  
when the vehicle speed is over 80  
km/h. (When it is under 70 km/h, pre-  
vious volume is back.)  
Each time you touch the “Adaptive Volume  
Control” switch, you can switch on or off.  
Touch the “Yes” switch.  
Touch the “Default” switch.  
200  
ꢀ Receiving Call Display  
(iii) Setting the screen  
You can select the method of the re-  
ceiving call display.  
2. Do the detailed settings of the  
screen and touch “OK”.  
1. Touch the “Screen” switch to display  
the “Screen Settings” screen.  
Touch the “Full” or “Icon” switch.  
Full mode . . . . . . When a call is received,  
the hands−free screen is  
displayed and you can  
operate it on the screen.  
Icon mode . . . . . The  
message  
is  
displayed on the upper  
side of the screen. You  
can only operate the  
steering switch.  
201  
ꢀ Auto answer  
When call is received, the display  
ꢀ The Bluetooth connection status at  
startup  
a
automatically changes to the talking  
screen and you can start to talk on the  
phone (without touching any switch) af-  
ter the preset time.  
Touch the “ON” or “OFF” switch of  
Show Bluetooth connection status at  
startup.  
When you turn the “POWER” switch to  
“ACC” or “IG−ON” and the Bluetooth is  
automatically connected, the connection  
check is displayed.  
Touch the “ON” switch of “Auto An-  
swer” and “−” or “+” switch to adjust  
the waiting time of auto answer within  
1 − 60 seconds.  
202  
ꢀ Initializing the settings  
(iv) Setting the phone book  
You can initialize the settings.  
You can register phone numbers in the  
phone book.  
Touch the “Yes” switch.  
Touch the “Default” switch.  
Touch the “Phone Book” to display the  
“Phone Book Management” screen.  
203  
ꢀ Transferring a telephone number  
You can transfer the telephone numbers  
in your Bluetooth phone to the system.  
Up to 1000 person’s data (up to 2 num-  
bers a person) can be registered in the  
phone book.  
Transfer it while the engine is running.  
You can do the detailed settings of  
phone book.  
2. Select the group you want to trans-  
fer the data to.  
1. Touch the “Transfer Data” switch to  
display “Select Group” screen.  
204  
3. Touch the “Overwrite” or “Add To”  
switch.  
4. Transfer the phone book data to the  
system using the Bluetooth phone.  
5. When this screen is displayed, the  
transfer is completed.  
This screen appears while transferring.  
To cancel it, touch the “Cancel” switch.  
If the transferring is interrupted on the  
way, the phone book data transferred until  
then can be memorized in the system.  
205  
ꢀ Registering the phone book data  
You can register the phone book data.  
When this screen is displayed, try the  
transfer operation again.  
2. Touch the desired switch to edit the  
phone book.  
1. Touch the “Register” switch.  
206  
ꢀ Editing the name  
When you do not input the name, the  
number is displayed.  
3. When you complete the edit, touch  
the “OK” switch.  
2. Use the software keyboard to input  
the name.  
1. Touch the “Name” switch.  
207  
ꢀ Editing the phone number  
You can register phone number in  
a
“TEL1” and “TEL 2” separately. Up to  
2 numbers a person can be registered.  
2. Input the number and touch ”OK”.  
3. Select the desired icon.  
1. Touch the “TEL 1” or “TEL 2”  
switch.  
208  
ꢀ Selecting the group  
ꢀ Setting the voice recognition  
You can set a group for a contact (for  
You can set the voice recognition. Up  
to 20 numbers can be registered for the  
voice recognition.  
example:  
“Family”,  
“Friends”,  
“Of-  
fice”...). It will then be easier for you  
to find this contact when needed, by  
using the group display.  
You can select “No group” or “Group  
01” to “Group 19”.  
“No group” is displayed if you do not set  
the group.  
2. Select the desired group.  
1. Touch the “Voice Rec.” switch.  
1. Touch the “Group” switch.  
209  
ꢀ Adding data to the phone book  
You can add data to the phone book.  
2. Select the phone number and touch  
the “REC” switch to record a voice-  
tag.  
3. Touch the “PLAY” switch to play the  
voicetag.  
If you want to delete it, touch the “Delete”  
switch and “OK”.  
1. Touch the “Add to” switch.  
210  
ꢀ Editing the data  
You can edit the registered data.  
2. Select the data you want to add log  
data to.  
3. Confirm the added data on the  
screen and touch “OK”.  
1. Touch the “Edit” switch.  
211  
2. Select the data you want to edit.  
3. Touch the desired switch.  
When you also touch the “Edit” switch  
on this screen, you can edit it.  
When you edit the data, touch “OK”.  
212  
ꢀ Deleting the data  
You can delete the data.  
When you release your vehicle, delete  
all your data on the system.  
2. Touch the desired switch.  
3. Touch the “Yes” switch.  
1. Touch the “Delete” switch of “Phone  
Book”.  
213  
You can also delete it in the following  
way.  
2. Select the desired data.  
3. Touch the “Delete” switch.  
1. Touch the “Phone Book” switch.  
214  
ꢀ Deleting all the phone data  
4. Touch the “Yes” switch.  
2. Select the deleting method.  
1. Touch the “Delete All” switch of  
“Phone book”.  
Group Data . . . . . . . deleting all the phone  
data in group  
All Contact Data . . deleting all the phone  
data  
215  
3. When you select “Group Data”, the  
“Select Group” screen is displayed.  
You can also delete it in the following  
way.  
5. Touch the “Yes” switch.  
4. Select the desired group.  
1. Touch the “Phone Book” switch.  
216  
ꢀ Registering a group name  
You can register 20 groups. “No  
Group”, “Group 01” − “Group 19” are  
registered by default.  
You can change “Group 01” − “Group 19”  
into desired names.  
2. Touch the “Delete All” switch.  
3. Touch the “Yes” switch.  
1. Touch the “Register” switch of  
“Group name”.  
217  
ꢀ Selecting a group icon  
2. Select the group you want to regis-  
ter.  
3. When you complete all the edit,  
touch the “OK” switch.  
1. Touch the “Icon” switch.  
218  
ꢀ Editing a group name  
2. Select the desired icon.  
2. Use the software keyboard to input  
the name.  
1. Touch the “Name” switch.  
219  
ꢀ Deleting a group name  
You can delete the group names indi-  
vidually or all at once. If you delete a  
group name, that group will return to  
the default setting. (excluding “No  
Group”)  
2. Select the group you want to delete  
the name of.  
3. Touch the “Yes” switch.  
1. Touch the “Delete” switch of “Group  
Name”.  
220  
ꢀ Deleting all the group names  
ꢀ Deleting the log data  
You can delete the log data individually  
or all at once.  
When you release your vehicle, delete  
all the data on the system.  
(a) individually  
2. Touch the “Yes” switch.  
1. Touch the “Delete All” switch of  
“Group Name”.  
1. Touch the “Delete” switch on the  
“Log Data” screen.  
221  
(b) all at once  
2. Touch the “Yes” switch.  
2. Touch the “Yes” switch.  
1. Touch the “Delete All” switch on the  
“Outgoing Calls” or “Incoming Calls”  
screen.  
222  
ꢀ Changing the security code  
(v) Setting the security  
The security code is 4 digits and the  
default is “0000”.  
When you set the security, you can pre-  
vent people from using some functions  
of the hands−free system. It is useful  
when you leave your car with the hotel  
or you do not want others to see the  
data you registered.  
Choose a new code that is hard for other  
people to know.  
When you change the security code, do  
not forget the code. The dealers cannot  
unlock the security when you forget it.  
When you set or unlock the security, you  
have to input the security code. Be sure  
to change the default code when you use  
the security for the first time.  
If you forget the security code, initialize  
your personal data. (See “Initializing the  
security code” on page 225.)  
2. Touch the “Change” switch.  
1. Touch the “Phone Book Lock”  
switch.  
223  
ꢀ Phone Book Lock  
When you set the phone book lock, you  
can have the following functions  
locked.  
ꢀ Display of the phone book screen and  
transferring, registering, editing, delet-  
ing the phone book data.  
ꢀ Display of speed dial screen, register-  
ing, deleting the speed dial and speed  
dialing.  
ꢀ Display of the other party’s name for  
calls being received or made.  
ꢀ Display of dialed numbers screen and  
received calls screen, deleting dialed  
numbers and received numbers.  
3. Input the security code.  
4. Touch the “Yes” switch.  
Each time you touch “ꢁ”, an inputted digit  
is deleted.  
ꢀ Display of phone information screen.  
ꢀ Changing the security code.  
When you set this function, the speed dial  
screen is not displayed while you are driv-  
ing.  
224  
ꢀ Initializing the security code  
You can initialize the settings.  
1. Touch the “ON” switch.  
2. Input the security code and touch  
“OK”.  
1. Touch the “Default” switch.  
225  
(f) Setting a Bluetooth phone  
ꢀ Selecting a Bluetooth phone  
In case you register more than one  
Bluetooth phone, you need to choose a  
favorite one.  
2. Input the security code and touch  
“OK”.  
3. Touch the “Yes” switch.  
1. Touch the “Settings” switch to dis-  
play “Settings” screen.  
226  
2. Touch the “Select Telephone” switch  
to display “Select Telephone” screen.  
You can select the Bluetooth phone  
from a maximum of 6 numbers.  
Although you can register up to 6 Blue-  
tooth phones in the system, only one  
Bluetooth phone can function at a time.  
3. Touch the “OK” switch.  
“Empty” is displayed when you have not  
registered a Bluetooth phone yet.  
Bluetooth mark is displayed when you  
choose the phone.  
227  
When another Bluetooth phone is trying to  
connect, this screen is displayed.  
ꢀ Displaying Bluetooth information  
You can see or set the information of  
the Bluetooth phone on the system.  
Device Name . . the name of the Blue-  
tooth phone which is dis-  
played on the screen.  
You can change it into a  
desired name.  
Bluetooth Device Address  
. . the address peculiar  
to  
the  
system.  
You  
cannot change it.  
When the result message is displayed,  
you can use the Bluetooth phone.  
Touch the “Yes” or “No” switch.  
1. Select the desired phone and touch  
the “Information” switch.  
228  
ꢀ Changing a Device Name  
You can change a device name. If you  
change a device name, the name regis-  
tered in your cellular phone is not  
changed.  
2. Touch the “Change” switch.  
3. When you complete the setting,  
touch “  
”.  
1. Touch the “Change” switch.  
229  
ꢀ Changing the Bluetooth settings  
When you change the device name or  
Passkey, do the following.  
You can change the display and settings  
of Bluetooth information on the system.  
The information displays the following  
items.  
Device Name . . the  
name  
in  
the  
Bluetooth network. You  
can change it.  
Passkey . . . . . . . the password when you  
register  
your  
cellular  
phone in the system. You  
can change it into the  
figure of 4−8 digits.  
2. Use the software keyboard to input  
the device name.  
Bluetooth Device Address . . . . . . . . . . . . . . .  
the address peculiar to  
the system. You can not  
change it. If you have  
registered two Bluetooth  
phones with the same  
Device Name or Passkey  
1. Touch the “Bluetooth” switch.  
and  
you  
cannot  
distinguish one from the  
other, refer to it.  
230  
2. Touch the “Change” of “Device  
Name” or “Passkey”.  
3. Use the software keyboard to input  
the device name.  
4. Input a Passkey with 4 − 8 digits.  
When you touch “ꢁ”, the inputted digit is  
You can input up to 20 characters.  
deleted.  
231  
ꢀ Initializing the Bluetooth settings.  
You can initialize the settings.  
5. When you complete the setting,  
2. Touch the “Yes” switch.  
touch “  
”.  
1. Touch the “Default” switch.  
232  
ꢀ Deleting a Bluetooth phone  
2. Select the telephone you want to de-  
lete and touch “OK”.  
3. Touch the “Yes” switch.  
1. Touch the “Delete” switch of “Blue-  
tooth Telephone”.  
233  
When you delete the telephone while  
another Bluetooth phone is connected,  
this message is displayed.  
ꢀ Displaying the information of the  
Bluetooth phone you delete  
You can display the information of the  
Bluetooth phone before you delete it  
and you can make sure whether the  
telephone you delete is correct or not.  
2. When you complete confirming it,  
touch “  
”.  
Touch the “Yes” switch.  
1. Select the telephone you want to  
display the information about.  
234  
—Speech command system  
The speech command system enables  
you to operate the hands−free system  
by giving a command.  
If the hands−free system does not re-  
spond or the confirmation screen does not  
disappear, push the speech command  
switch and try again.  
If no command is given, a beep sounds  
and the indicator disappears 6 seconds  
later.  
If the system does not recognize your  
speech, the system will respond with this  
message (“System does not recognize this  
command, rephrase your command.”).  
Start the operation from the beginning.  
2. Give a command while an indicator  
is shown in the display. If you want  
to check the command list, touch  
the “Help” switch to display the Help  
screen. (See “Help screen” on page  
236.) When you touch the “Cancel”,  
the previous screen returns.  
1. Push the speech command switch.  
A beep sounds and on−screen message is  
displayed with an indicator at the top left.  
235  
—Help screen  
This system has a function which dis-  
plays the voice recognition help screen.  
You can see the command list and op-  
erating guide on it.  
(b) Operating Guide  
(a) Command List  
ꢂMicrophone  
It is unnecessary to speak directly into  
1. Touch the “Operating Guide” tab on  
the upper side of the screen.  
the microphone when giving  
mand.  
a
com-  
2. Select the desired category by  
touching the buttons on the right  
side of the “Operating Guide”  
screen.*  
1. Touch the “Command List” tab on  
the upper side of the screen.  
2. Select the desired category by  
touching the buttons on the right  
side of the “Command List” screen.*  
3. You can scroll through the list of the  
operating guide by touching “  
” switch.  
” or  
“
3. You can scroll through the command  
*: For the vehicles without Navigation Sys-  
tem, “Tel” only is shown.  
list by touching  
switch.  
“
”
or  
“
”
Touch the “OK” switch after you check it.  
*: For the vehicles without Navigation Sys-  
tem, “Tel” only is shown.  
Touch the “OK” switch after you check it.  
236  

Related Topics

OPERATION OF INSTRUMENTS AND CONTROLS Multi-information display

Reference
Before using the multi-information display
Switch operation
Functions
Information
Outside temperature display

Popular Owner Manuals

Audi
BMW
Citroen
Ford
Honda
Peugeot

Latest Owner Manuals

Second Generation (2004-2009) Toyota Prius 4 Door Second Generation (2004-2009) Toyota Prius 4 Door
First Generation (1997-2003) Toyota Prius 4 Door First Generation (1997-2003) Toyota Prius 4 Door
Fifth Generation (2019-2026) Toyota Rav4 SUV Fifth Generation (2019-2026) Toyota Rav4 SUV
Third Generation (2006-2012) Toyota Rav4 SUV Third Generation (2006-2012) Toyota Rav4 SUV
Fifth Generation (2020-2025) Toyota Supra 2 Door Fifth Generation (2020-2025) Toyota Supra 2 Door
Twelfth Generation (2018-2026) Toyota Corolla 4 Door Twelfth Generation (2018-2026) Toyota Corolla 4 Door