134
2-7. Windows
Auto-opening/closing
To fully open the window automatically, press the switch completely
down, then release. The window will fully open automatically.
To fully close the window automatically, pull the switch completely up,
then release. The window will fully close automatically.
To stop the window partway, pull or press the switch in the opposite
direction and then release it.
This function is only equipped on the driver’s side.
Power window system initialization procedure
If the battery was disconnected during vehicle maintenance, or for other rea-
sons (such as a switch continues to be operated after the window is fully
open/closed), the window will not fully open and close automatically.
The power window auto function will only resume on a power window that has
been reset.
1
Switch the ignition ON.
2
Make sure that the power window lock switch located on the driver’s door
is not depressed.
3
Press the switch and fully open the window.
4
Pull up the switch to fully close the window and continue holding the
switch for about 2 seconds after the window fully closed.
5
Make sure that the power windows operate correctly using the door
switches.
Jam-safe window
If foreign matter is detected between the window and the window
frame while the window is closing automatically, the window stops
closing and automatically opens partway.
■Jam-safe window
●The jam-safe function may operate under the following conditions
• A strong impact is detected while the window is closing automatically.
• Window is closing automatically in very low temperatures.
●In the event the jam-safe function activates and the power window cannot
be closed automatically, pull and hold the switch and the window will close.
●The jam-safe window function does not operate until the system has been
reset.
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)
English 
