64
Seats, restraints
Fasten vehicle-approved ISOFIX
child restraint systems to the ISOFIX
brackets. Specific vehicle ISOFIX
child restraint system positions are
marked in the ISOFIX table 3 66.
The ISOFIX brackets are located
below the i-Size symbol in the seat
cover.
An i-Size child restraint system is an
universal ISOFIX child restraint
system according UN Regulation No.
129.
All i-Size child restraint systems can
be used on any vehicle seat suitable
for i-Size, i-Size table 3 66.
Either a Top-tether strap or a support
leg must be used in addition to the
ISOFIX brackets.
A support leg must be placed firmly on
the floor. Positioning the support leg
in a footwell storage is not permitted.
i-Size child seats and vehicle seats
with i-Size approval are marked with
i-Size symbol, see illustration.
Selecting the right system
The rear seats are the most
convenient location to fasten a child
restraint system.
Children should travel facing
rearwards in the vehicle as long as
possible. This makes sure that the
child's backbone, which is still very
weak, is under less strain in the event
of an accident.
Suitable are child restraint systems
that comply with valid UN ECE
regulations. Check local laws and
regulations for mandatory use of child
restraint systems.
Top-tether anchors
Top-tether anchors are marked with
the symbol : for a child seat.
The following child restraints are
recommended for the following
weight classes:
●
Group 0+:
In addition to the ISOFIX brackets,
fasten the Top-tether strap to the
Top-tether anchors.
Römer Baby-Safe Plus with
ISOFIX base for children up to
13 kg
Third row seats 3 51.
●
Group I:
Römer Duo Plus ISOFIX with
ISOFIX and Top-tether for
children from 9 kg to 18 kg
ISOFIX child restraint systems of
universal category positions are
marked in the table by IUF 3 66.
English 