Get Instruments and controls Guide for Vauxhall Crossland SUV First Generation (2020-2024)

Instruments and controls

69

Engine oil level monitor ............. 81

Service display .......................... 81

Control indicators ...................... 82

Turn lights .................................. 82

Seat belt reminder ..................... 82

Airbag and belt tensioners ......... 83

Airbag deactivation .................... 83

Charging system ....................... 83

Malfunction indicator light .......... 84

Service vehicle soon ................. 84

Stop engine ............................... 84

System check ............................ 84

Brake and clutch system ........... 84

Parking brake ............................ 85

Antilock brake system (ABS) ..... 85

Gear shifting .............................. 85

Lane departure warning ............ 85

Electronic Stability Control and

Low beam .................................. 87

High beam ................................. 87

High beam assist ....................... 88

Front fog lights ........................... 88

Rear fog light ............................. 88

Rain sensor ............................... 88

Cruise control ............................ 88

Side blind spot alert ................... 88

Active emergency braking ......... 88

Speed limiter ............................. 88

Door open .................................. 88

Displays ....................................... 89

Driver Information Centre .......... 89

Info Display ................................ 91

Head-up display ........................ 93

Vehicle messages ........................ 95

Warning chimes ......................... 95

Instruments and

controls

Controls ....................................... 70

Steering wheel adjustment ........ 70

Steering wheel controls ............. 70

Heated steering wheel ............... 70

Horn ........................................... 71

Windscreen wiper and washer . . 71

Rear window wiper and

washer ...................................... 73

Outside temperature .................. 73

Clock ......................................... 74

Power outlets ............................. 74

Inductive charging ..................... 75

Cigarette lighter ......................... 76

Ashtrays .................................... 76

Vehicle personalisation ................ 96

Telematics services ..................... 99

Vauxhall Connect ...................... 99

Traction Control system ........... 85

Electronic Stability Control and

Traction Control system off ...... 86

Engine coolant temperature ...... 86

Preheating ................................. 86

Exhaust filter .............................. 86

AdBlue ....................................... 86

Deflation detection system ........ 86

Engine oil pressure .................... 87

Low fuel ..................................... 87

Autostop .................................... 87

Exterior light .............................. 87

Warning lights, gauges and indi‐

cators ........................................... 77

Instrument cluster ...................... 77

Speedometer ............................. 79

Odometer .................................. 79

Trip odometer ............................ 79

Tachometer ............................... 80

Fuel gauge ................................ 80

Engine coolant temperature

gauge ....................................... 80

70

Instruments and controls

Steering wheel controls

Heated steering wheel

Controls

Steering wheel adjustment

Cruise control and speed limiter are

operated via the controls on the left

side of the steering wheel.

On the same side is located the

switch for the heated steering wheel.

Infotainment system can be operated

via the controls on the right side of the

steering wheel.

Activate heating by pressing *.

Activation is indicated by the LED in

the button.

Heating is operational when the

engine is running and during an

Autostop.

Unlock lever, adjust steering wheel,

then engage lever and ensure it is

fully locked.

Do not adjust steering wheel unless

vehicle is stationary and steering

wheel lock has been released.

Stop-start system 3 126.

Driver assistance systems 3 140.

Further information is available in the

Infotainment manual.

Heated steering wheel 3 70.

Instruments and controls

71

To activate interval wiping mode the

next time ignition is switched on,

press the lever downwards to position

OFF and back to INT.

Horn

Windscreen wiper and

washer

Windscreen wiper with adjustable

wiper interval

Adjustable wiper interval

Press j.

HI : fast

Wiper lever in position INT.

Turn the adjuster wheel to adjust the

wiping frequency.

LO : slow

INT : interval wiping

OFF : off

1x : single wipe

Do not use if the windscreen is frozen.

Switch off in car washes.

72

Instruments and controls

switched on, press the lever

downwards to position OFF and back

to AUTO.

Windscreen wiper with rain

sensor

Windscreen washer

Do not use if the windscreen is frozen.

Switch off in car washes.

Adjustable sensitivity of the rain

sensor

Pull lever. Washer fluid is sprayed

onto the windscreen and the wiper

wipes a few times.

HI

: fast

LO

: slow

AUTO : automatic wiping with rain

Washer fluid 3 178.

sensor

OFF : off

1x

: single wipe

Wiper lever in position AUTO.

Turn the adjuster wheel to adjust the

sensitivity of the rain sensor.

Make sure the sensor is not blocked

3 35, 3 10.

Control indicator < 3 71.

In AUTO position, the rain sensor

detects the amount of water on the

windscreen and automatically

regulates the frequency of the

windscreen wiper. If ignition is

switched off, automatic wiping mode

is deactivated. To activate automatic

wiping mode the next time ignition is

Instruments and controls

73

Activation or deactivation of this

function can be changed in the

Vehicle personalisation menu 3 96.

Rear window wiper and

washer

Rear window wiper

Outside temperature

A drop in temperature is indicated

immediately and a rise in temperature

after a time delay.

Rear window washer

OFF : off

Illustration shows an example.

Push lever.

INT : intermittent operation

ON : continuous operation

If outside temperature drops to 3 °C,

a warning message is displayed in the

Driver Information Centre.

Washer fluid is sprayed onto the rear

window and the wiper wipes a few

times.

The rear window washer system is

deactivated when the fluid level is

low.

Do not use if the rear window is

frozen.

Switch off in car washes.

The rear window wiper comes on

automatically when the windscreen

wiper is switched on and reverse gear

is engaged.

9 Warning

The road surface may already be

icy even though the display

indicates a few degrees above 0

°C.

Washer fluid 3 178.

74

Instruments and controls

Do not damage the outlets by using

unsuitable plugs.

Stop-start system 3 126.

Clock

Date and time are shown in the

Info Display 3 91.

Setting date and time, see

Infotainment manual.

USB charging port

Power outlets

Another power outlet is located in the

console between the front seats.

Do not exceed the maximum power

consumption of 120 W.

With ignition off, the power outlet is

deactivated. Additionally, the power

outlet is deactivated in the event of

low vehicle battery voltage.

Electrical accessories that are

connected must comply with the

electromagnetic compatibility

requirements laid down in

DIN VDE 40 839.

One or two USB ports are prepared

for charging devices.

When two USB ports are available,

the upper USB port can be used to

connect a phone for phone projection.

A 12 V power outlet is located in the

centre console.

Notice

The sockets must always be kept

clean and dry.

Do not connect any current-delivering

accessories, e.g. electrical charging

devices or batteries.

USB port and phone projection see

Infotainment manual.

Instruments and controls

75

On some mobile devices, a back

cover with an integrated coil or a

jacket may be required to use

inductive charging.

Inductive charging

9 Warning

Protective cover for the mobile device

could have impact on the inductive

charging.

Inductive charging can affect the

operation of implanted

pacemakers or other medical

devices. If applicable, seek

medical advice before using the

inductive charging device.

LED illuminates yellow, when

●

metall objects have been

detected in the charging area

●

mobile device was not placed

9 Warning

properly.

To charge a mobile device:

In the case that the mobile device is

not charging properly:

1. Remove the mobile device from

1. Remove all objects from the

Remove any metal objects from

the charging device before

charging a mobile device, as these

objects could become very hot.

charging device.

2. Place the mobile device with the

display facing upwards on the

charging device.

the charging device.

2. Rotate the mobile device by 180°.

3. Wait 3 seconds after the LED has

extinguished and place the mobile

device on the charging device

again.

3. LED illuminates green, when

mobile device is charging.

The mobile device must be smaller

than 7 cm by 15 cm to fit into the

charging device.

PMA or Qi compatible mobile devices

can be charged inductively.

76

Instruments and controls

Cigarette lighter

A portable ashtray can be placed in

the cupholders.

Press in the cigarette lighter. It

switches off automatically once the

element is glowing. Pull out the

cigarette lighter.

Ashtrays

Caution

To be used only for ash and not for

combustible rubbish.

Instruments and controls

77

Warning lights, gauges and indicators

Instrument cluster

78

Instruments and controls

Overview

b

f

>

ø

<

Electronic Stability Control

and Traction Control system

3 85

High beam assist 3 88

Front fog lights 3 88

Rear fog light 3 88

Rain sensor 3 88

O

X

Turn lights 3 82

Seat belt reminder 3 82

a

Electronic Stability Control

and Traction Control system

off 3 86

v

Airbag and seat belt

tensioners 3 83

m

Cruise control 3 88

Side blind spot alert 3 88

W o Engine coolant temperature

high 3 86

V

p

Z

Airbag deactivation 3 83

Charging system 3 83

B

Ø

Active emergency braking

3 88

!

%

Y

Preheating 3 86

Exhaust filter 3 86

AdBlue 3 86

Malfunction indicator light

3 84

ß

Speed limiter 3 88

Door open 3 88

C

Service vehicle soon 3 84

h

Deflation detection system

3 86

w

STOP Stop engine 3 84

J

System check 3 84

I

Engine oil pressure 3 87

Engine oil level monitor

3 81

R

Brake and clutch system

3 84

m

Parking brake3 85

Y o

D

Low fuel 3 87

u

Antilock brake system (ABS)

3 85

Autostop 3 87

Exterior light 3 87

Low beam 3 87

High beam 3 87

8

9

C

R

Gear shifting 3 85

)

Lane departure warning

3 85

Instruments and controls

79

Speedometer

Odometer

Monochrome display

Trip odometer counts up to

9,999.9 miles without automatic

reset.

Indicates vehicle speed.

The total recorded distance is

displayed in miles.

Press L for 2 seconds to reset trip

Trip odometer

odometer.

The recorded distance since the last

reset is displayed in the Driver

Information Centre.

Colour display

Trip odometer counts up to

1,999.9 miles and resets then

automatically.

Press L for 2 seconds to reset trip

odometer.

80

Instruments and controls

The trip / fuel information menu

provides additionally two trip counter

3 89.

Engine coolant temperature

gauge

Caution

If the needle is in the red warning

zone, the maximum permitted

engine speed is exceeded. Engine

at risk.

Tachometer

Fuel gauge

Displays the coolant temperature.

50 : engine operating temperature

not yet reached

Displays the engine speed.

Drive in a low engine speed range for

each gear as much as possible.

A red marker indicates the beginning

of the warning zone of excessive

revolutions. For Diesel engines, the

warning zone starts at 5000

revolutions per minute. For petrol

engines, the warning zone starts at

7000 revolutions per minute.

90 : normal operating temperature

130 : temperature too high

Control indicator o illuminates if

engine coolant temperature is too

high.

Displays the fuel level in the tank.

Control indicator o illuminates if the

level in the tank is low.

Never run the fuel tank dry.

Because of the fuel remaining in the

tank, the top-up quantity may be less

than the specified fuel tank capacity.

Instruments and controls

81

distance. C flashes and then

Service display

Caution

illuminates permanently until service

is executed.

The service system informs when to

change the engine oil and filter or a

vehicle service is required. Based on

driving conditions, the interval at

which an engine oil and filter change

is required can vary considerably.

If engine coolant temperature is

too high, stop vehicle, switch off

engine. Danger to engine. Check

coolant level.

Reset of service interval

After each service, the service

indicator must be reset to ensure

proper functionality. It is

Service information 3 215.

Engine oil level monitor

recommended to seek the assistance

A required service due is displayed in

the Driver Information Centre for

7 seconds after switching on the

ignition.

The state of the engine oil level is

displayed in the Driver Information

Centre for a few seconds following

the service information after switching

on the ignition.

of a workshop.

Operate as following:

●

switch off ignition

press and hold button M or

CHECK

If no service is required for the next

1800 miles or more no service

A proper state of engine oil level is

indicated by the message Oil level

correct.

If engine oil level is low, I flashes

and Oil level incorrect is indicated,

accompanied by the C indicator.

Confirm engine oil level by using the

dipstick and top up engine oil

respectively.

information appears in the display.

●

switch on ignition, the distance

indication begins a countdown

If service is required within the next

1800 miles, the remaining distance or

time duration is indicated for several

seconds. Simultaneously C

when the display indicates =0,

release the button

The C disappears.

illuminates permanently as reminder.

Retrieving service information

If service is required in less than

600 miles, C flashes and then

illuminates permanently. Remaining

distance or time duration is indicated

for several seconds.

To retrieve the status of the service

information at any time press left

button underneath the Driver

Information Centre.

Engine oil 3 177.

A fault of measurement is indicated

by the message Oil level

measurement invalid. Check engine

oil level manually by using the

dipstick.

Overdued service is indicated by a

message in the Driver Information

Centre which indicates the overdued

82

Instruments and controls

Flashes

A turn light or the hazard warning

flashers are activated.

Rapid flashing: failure of a turn light or

associated fuse.

Control indicators

The control indicators described are

not present in all vehicles. The

description applies to all instrument

versions.

Depending on the equipment, the

position of the control indicators may

vary. When the ignition is switched

on, most control indicators will

illuminate briefly as a functionality

test.

This includes turn lights connected to

the socket of the towing equipment.

Bulb replacement 3 182.

Fuses 3 191.

Turn lights 3 105.

The control indicator colours mean:

Or

red

: danger, important reminder

Seat belt reminder

Seat belt reminder on all seats

X illuminates or flashes red in the

instrument cluster together with the

indication in the overhead console for

each seat belt.

yellow : warning, information, fault

green : confirmation of activation

blue : confirmation of activation

white : confirmation of activation

Instrument cluster overview 3 77.

Turn lights

O illuminates or flashes green.

Illuminates briefly

The parking lights are switched on.

The service information is displayed

for a few seconds.

Service information 3 215.

Instruments and controls

83

respective seat has been

fastened or if any passenger has

unfastened the seat belt.

Airbag system 3 49.

Airbag deactivation

Seat belts 3 46.

Airbag and belt tensioners

v illuminates red.

When the ignition is switched on, the

control indicator illuminates for

approx. 4 seconds. If it does not

illuminate, does not go out after

4 seconds or illuminates whilst

driving, there is a fault in the airbag

system. Seek the assistance of a

workshop. The airbags and belt

pretensioners may fail to trigger in the

event of an accident.

●

When the ignition is switched on,

X in the instrument cluster and

the symbol for the respective

seat in the overhead console

comes on, if the seat belt of any

occupied seat has not been

fastened.

ÓON illuminates yellow.

The front passenger airbag is

activated.

*OFF illuminates yellow.

The front passenger airbag is

deactivated.

Deployment of the belt pretensioners

or airbags is indicated by continuous

illumination of v.

After driving off, X in the

instrument cluster and the

symbol for the respective seat in

the overhead console flashes for

a certain time together with a

chime. After a certain time of

driving X illuminates constantly

until the seat belt of the

9 Warning

Airbag deactivation 3 54.

Have the cause of the fault

remedied immediately by a

workshop.

Charging system

p illuminates red.

Belt pretensioners 3 46.

84

Instruments and controls

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

Illuminates together with other control

indicators, accompanied by a warning

chime and a corresponding message

in the Driver Information Centre.

Stop engine immediately and seek

the assistance of a workshop.

Flashes when the engine is

running

The engine management system has

a fault that could lead to catalytic

converter damage. Ease up on the

accelerator until the flashing stops.

Seek the assistance of a workshop

immediately.

Illuminates when the engine is

running

Stop, switch off engine. Vehicle

battery is not charging. Engine

cooling may be interrupted. The

brake servo unit may cease to be

effective. Seek the assistance of a

workshop.

System check

J illuminates yellow or red.

Service vehicle soon

Illuminates yellow

A minor engine fault has been

detected.

C illuminates yellow.

Illuminates briefly when the ignition is

switched on.

Malfunction indicator light

Z illuminates or flashes yellow.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

May illuminate together with other

control indicators and a

Illuminates red

A major engine fault has been

detected.

Stop engine as soon as possible and

seek the assistance of a workshop.

corresponding message in the Driver

Information Centre.

Seek the assistance of a workshop

immediately.

Illuminates when the engine is

running

Fault in the emission control system.

The permitted emission limits may be

exceeded.

Brake and clutch system

R illuminates red.

The brake and clutch fluid level is too

low, when parking brake is not

applied 3 179.

Stop engine

Y illuminates red.

Illuminates briefly when the ignition is

switched on.

Seek the assistance of a workshop

immediately.

Instruments and controls

85

ABS. The brake system remains

operational but without ABS

regulation.

Automatic transmission manual

mode

R is indicated, when upshifting is

recommended for fuel saving

reasons.

9 Warning

Stop. Do not continue your

journey. Consult a workshop.

Antilock brake system 3 137.

Illuminates when the manual parking

brake is applied and ignition is

switched on 3 138.

Gear shifting

Manual transmission

Lane departure warning

) flashes yellow when the system

recognises an unintended lane

change.

Brake fluid 3 179.

Parking brake

Lane departure warning 3 163.

m illuminates red.

Illuminates when the parking brake is

applied and ignition is switched on

3 138.

Electronic Stability Control

and Traction Control system

b illuminates or flashes yellow.

Antilock brake system

(ABS)

Illuminates

A fault in the system is present.

Continued driving is possible. Driving

stability, however, may deteriorate

depending on road surface

conditions.

Have the cause of the fault remedied

by a workshop.

u illuminates yellow.

R with the number of a higher gear is

indicated, when upshifting into this

gear is recommended for fuel saving

reasons.

Illuminates for a few seconds after the

ignition is switched on. The system is

ready for operation when the control

indicator extinguishes.

If the control indicator does not go out

after a few seconds, or if it illuminates

while driving, there is a fault in the

86

Instruments and controls

Check coolant level immediately

Flashes

Illuminates constantly

Indication of a low additive level. Seek

the assistance of a workshop.

3 178.

The system is actively engaged.

Engine output may be reduced and

the vehicle may be braked

If there is sufficient coolant, consult a

workshop.

Exhaust filter 3 129.

automatically to a small degree.

Preheating

Electronic Stability Control and

AdBlue

Traction Control system 3 139.

! illuminates yellow.

Y flashes or illuminates yellow.

Preheating of diesel engine is

activated. Only activates when

outside temperature is low. Start the

engine when control indicator

extinguishes.

Electronic Stability Control

and Traction Control system

off

Illuminates yellow

The remaining driving range is

between 370 miles and 1500 miles.

n illuminates yellow.

Starting the engine 3 124.

Flashes yellow

The remaining driving range is

between 0 and 370 miles.

AdBlue level is low. Refill AdBlue

soon to avoid prevention of the

engine start.

The systems are deactivated.

Exhaust filter

Engine coolant temperature

o illuminates red.

% or C illuminates yellow.

The exhaust filter requires cleaning.

Continue driving until the control

indicator extinguishes.

Illuminates when the engine is

running

AdBlue 3 130.

Illuminates temporarily

Stop, switch off engine.

Deflation detection system

w illuminates or flashes yellow.

Start of saturation of the exhaust filter.

Start cleaning process as soon as

possible by driving at a vehicle speed

of at least 40 mph.

Caution

Coolant temperature too high.

Instruments and controls

87

1. Select neutral gear.

Bleeding the diesel fuel system

Illuminates

Tyre pressure loss in one or more

wheels. Stop immediately and check

tyre pressure.

3 181.

2. Move out of the flow of traffic as

quickly as possible without

impeding other vehicles.

Autostop

3. Switch off ignition.

D illuminates or flashes green.

Flashes

Illuminates green

9 Warning

Fault in system. Consult a workshop.

Engine is in an Autostop.

Deflation detection system 3 197.

When the engine is off,

considerably more force is needed

to brake and steer.

During an Autostop, the brake

servo unit will still be operational.

Do not remove key until vehicle is

stationary, otherwise the steering

wheel lock could engage

unexpectedly.

Flashes green

Autostop is temporarily unavailable,

or Autostop mode is invoked

automatically.

Engine oil pressure

I illuminates red.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

Stop-start system 3 126.

Illuminates when the engine is

running

Exterior light

8 illuminates green.

The exterior lights are on 3 101.

Keep engine turned off and let the

vehicle be towed to a workshop

3 177.

Caution

Engine lubrication may be

interrupted. This may result in

damage to the engine and / or

locking of the drive wheels.

Low beam

Low fuel

o illuminates yellow.

Level in fuel tank is too low.

Refuelling 3 167.

9 illuminates green.

Illuminated when low beam is on.

High beam

C illuminates blue.

88

Instruments and controls

Illuminated when high beam is on or

Notice

Cruise control

during headlight flash 3 102.

m also illuminates if the seat belts

of the front passengers are not

fastened. In this case, active

m illuminates in the Driver

Information Centre.

Cruise control 3 140.

High beam assist

emergency braking is deactivated.

f illuminates green.

Flashes

The system is actively engaged.

Depending on the situation, the

vehicle may automatically brake

moderately or hard.

Forward collision alert 3 145.

Front pedestrian protection 3 149.

The high beam assist is activated

3 102.

Side blind spot alert

B illuminates green.

The system is active 3 158.

Front fog lights

> illuminates green.

The front fog lights are on 3 105.

Active emergency braking

m illuminates or flashes yellow.

Rear fog light

Illuminates

Speed limiter

ø illuminates yellow.

The rear fog light is on 3 106.

The system has been deactivated or

a fault has been detected.

Additionally, a warning message is

displayed in the Driver Information

Centre.

Check the reason of the deactivation

3 147 and in case of a system fault,

seek the assistance of a workshop.

ß illuminates in the Driver

Information Centre.

Speed limiter 3 143.

Rain sensor

< illuminates green.

Door open

Illuminated when automatic wiping

with rain sensor is activated.

Windscreen wiper and washer 3 71.

h illuminates red.

A door or the tailgate is open.

Instruments and controls

89

Selecting menus and functions

Displays

Driver Information Centre

The Driver Information Centre is

located in the instrument cluster.

Depending on the version, the Driver

Information Centre is available as

monochrome or colour display.

Driver Information Centre indicates:

●

overall and trip odometer

digital speed indication

trip / fuel information menu

gear shift indication

Press M to switch between the

respective menus.

Turn the adjuster wheel to select a

page in the trip / fuel information

menu.

Press SET/CLR to confirm or reset a

function.

Vehicle and service messages are

popped up in the Driver Information

Centre if required. Scroll messages

by turning the adjuster wheel.

Confirm messages by pressing

SET/CLR.

Or

service information

vehicle and warning messages

driver assistance messages

pop-up messages

AdBlue information

Additionally, some menus can be

selected via the left button:

90

Instruments and controls

Press CHECK to switch between the

respective menus.

Vehicle messages 3 95.

Average fuel consumption

Digital speed

Display of average consumption. The

measurement can be reset at any

time and starts with a default value.

To reset, press SET/CLR for a few

seconds.

Digital display of the instantaneous

speed and recognised speed limit.

Trip / fuel information menu,

colour display

Trip / fuel information menu,

monochrome display

Average speed

Display of average speed. The

measurement can be reset at any

time.

To reset, press SET/CLR for a few

seconds.

Fuel range

Range is calculated from current fuel

level and current consumption. The

display shows average values.

After refuelling, the range is updated

Differerent pages with combined

information can be selected.

Turn the adjuster wheel to select a

page.

Turn the adjuster wheel to select a

page:

automatically after a brief delay.

When the fuel level is low, a message

appears on the display and the

control indicator o in the fuel gauge

illuminates 3 87.

Trip odometer

Trip odometer 3 79.

Information page:

Fuel range

Range is calculated from current fuel

level and current consumption. The

display shows average values.

Instantaneous Fuel Consumption

Display of the instantaneous

consumption.

Instruments and controls

91

After refuelling, the range is updated

automatically after a brief delay.

When the fuel level is low, a message

appears on the display and the

control indicator o in the fuel gauge

illuminates 3 87.

Instantaneous Fuel Consumption

Display of the instantaneous

consumption.

The values of trip 1 page can be reset

by pressing SET/CLR for a few

seconds.

Compass page

Displays the geographic direction of

driving.

Trip 2 page:

Average speed

Display of average speed. The

measurement can be reset at any

time.

Blank page

No trip/fuel information is displayed.

AdBlue

Press M or CHECK repeatedly until

the AdBlue menu is shown.

Average fuel consumption

Trip 1 page:

Display of average consumption. The

measurement can be reset at any

time and starts with a default value.

Distance travelled

Displays the current distance for trip

2 since a certain reset.

AdBlue range

Average speed

Indicates an estimate of the AdBlue

level. A message indicates whether

the level is sufficient or low.

Display of average speed. The

measurement can be reset at any

time.

3 130.

Average fuel consumption

The values of trip 2 page can be reset

by pressing SET/CLR for a few

seconds.

Display of average consumption. The

measurement can be reset at any

time and starts with a default value.

Distance travelled

Displays the current distance for trip

1 since the reset.

Trip odometer counts up to

9,999.9 miles without automatic

reset.

Info Display

The Info Display is located in the

instrument panel near the instrument

cluster.

Digital speed page

Digital display of the instantaneous

speed.

Depending on the vehicle

configuration the vehicle has a

●

Graphic Info Display

or

Stop and Start time counter

A time counter calculates the time

spent in STOP mode during a

journey. It resets to zero every time

the ignition is switched on.

●

7'' Colour Info Display with

touchscreen functionality

92

Instruments and controls

or

Graphic Info Display

●

8'' Colour Info Display with

touchscreen functionality

The Info Display can indicate:

●

time 3 74

outside temperature 3 73

date 3 74

Infotainment system, see

description in the Infotainment

manual

●

indication of rear view camera

Press X to switch on the display.

Press ; to display the homepage.

Touch required menu display icon.

Touch a respective icon to confirm a

selection.

Touch 9 to return to the next higher

menu level.

Press ; to return to the homepage.

3 162

Press X to switch on the display.

Press MENU to select main menu

page.

Press èäåé to select a menu page.

Press OK to confirm a selection.

Press BACK to exit a menu without

changing a setting.

indication of panoramic view

system 3 159

indication of parking assist

instructions 3 150

navigation, see description in the

Infotainment manual

vehicle and system messages

3 95

For further information, see

Infotainment manual.

Vehicle personalisation 3 96.

For further information, see

Infotainment manual.

settings for vehicle

personalisation 3 96

7'' Colour Info Display

Selecting menus and settings

Menus and settings are accessed via

the touchscreen.

Instruments and controls

93

Touch required menu display icon or

a function.

Confirm a required function or

selection by touching.

Touch r on the display to exit a

menu without changing a setting.

For further information, see

Infotainment manual.

8'' Colour Info Display

Selecting menus and settings

There are three options to operate the

display:

●

via buttons below the display

by touching the touchscreen

via speech recognition

Button and touch operation

Speech recognition

Description see Infotainment manual.

Vehicle personalisation 3 96.

Head-up display views:

●

vehicle speed

speed limits by the traffic sign

recognition

set speed of speed limiter

set speed of cruise control

navigation information.

Head-up display

The head-up display displays driver

information onto a foldable projection

plane on the driver's side.

●

The information appears as an image

projected from a lense in the

instrument panel onto the projection

plane directly ahead in driver's view.

The image appears focused out

toward the front of the vehicle.

Press X to switch on the display.

Press SET to select system settings

(units, language, time and date).

Press Í to select vehicle settings or

driving functions.

94

Instruments and controls

Care of head-up display

keep the head-up display image

dim and placed low in your field of

view.

Clean the projection plane of the

head-up display with a soft cloth

sprayed with glass cleaner. Wipe the

lens gently, then dry it.

Adjust brightness

The head-up display image will

automatically dim and brighten to

compensate for outside lighting.

Brightness can also be adjusted

manually as needed:

Press e to brighten the display. Press

æ to dim the display.

System limitations

Head-up display may not operate

properly when:

●

The lens in the instrument panel

is covered by objects or not

clean.

Adjust position of head-up display

image

1. Adjust the driver's seat.

2. Start the engine.

3. Press ä or å to centre the image.

It can only be adjusted up and

down, not side to side.

●

Display brightness is too dim or

The image can temporarily illuminate

depending on angel and position of

sunlight.

bright.

Image is not adjusted to the

proper height.

The driver wears polarised

sunglasses.

Switching off

Press æ and hold to turn the head-up

display off.

If the head-up image is not correct for

other reasons, contact a workshop.

Language

Preferred language can be set in

vehicle personalisation menu 3 96.

9 Warning

If the head-up display image is too

bright or too high in your field of

view, it may obstruct your view

when it is dark outside. Be sure to

Units

Units can be changed in vehicle

personalisation menu 3 96.

Instruments and controls

95

●

If a warning message appears in

the Driver Information Centre.

If the electronic key is not in the

passenger compartment.

If the parking assist detects an

object.

If an unintended lane change

occurs.

Messages in the

Vehicle messages

Messages are indicated in the Driver

Information Centre, in some cases

together with a warning chime.

Colour Info Display

Some important messages may

appear additionally in the

Info Display. Some messages only

pop-up for a few seconds.

Warning chimes

If the exhaust filter has reached

the maximum filling level.

If several warnings appear at the

same time, only one warning chime

will sound.

When the vehicle is parked and /

or the driver's door is opened

●

When starting the engine or whilst

driving

With exterior lights on.

The warning chime regarding not

fastened seat belts has priority over

any other warning chime.

During an Autostop

●

If the driver's door is opened.

If any condition for an autostart is

not fulfilled.

Press SET/CLR to confirm a

message.

●

If a seat belt is not fastened.

If a door or the tailgate is not fully

closed when starting off.

Vehicle and service messages

●

If a certain speed is exceeded

with parking brake applied.

If cruise control deactivates

automatically.

If a programmed speed or speed

limit is exceeded.

The vehicle messages are displayed

as text. Follow the instructions given

in the messages.

96

Instruments and controls

Unit settings

●

Vehicle

Vehicle personalisation

The vehicle's behaviour can be

personalised by changing the settings

in the Info Display.

Some functions are only displayed or

active when the engine is running.

Select Display configuration I OK.

Unlocking boot only: Activation /

Deactivation.

Plip action: Driver / all doors.

Driving assistance

Fatigue Detection system:

Activation / Deactivation.

Speed recommendation:

Activation / Deactivation.

Select Choise of units I OK.

Select desired settings I OK.

Language settings

Select Display configuration I OK.

Select Choise of language I OK.

Select desired language I OK.

Graphic Info Display

Vehicle settings

7" Colour Info Display

Select Define vehicle parameters I

OK.

In the corresponding submenus the

following settings can be changed:

●

Lighting.

Follow me home headlamps:

Activation and setting duration

time.

Welcome lighting: Activation and

setting duration time.

Comfort

Ambient lighting: Activation /

Deactivation.

Press MENU to open the menu page.

Use four-way button to operate the

display:

Select ˆ Personalisation-

configuration I OK.

Press ; to open homepage.

Use touch buttons to operate the

display:

Rear wiper in reverse gear:

Activation / Deactivation.

Select Settings.

Instruments and controls

97

Unit settings

Select Units

view camera guidelines on the

Info Display.

only when pressing T on the

remote control.

●

Comfort and Convenience

Change units for Consumption and

8" Colour Info Display

Distance and Temperature.

Auto Wipe in Reverse Gear:

Activates or deactivates

automatic switching on of the

rear window wiper when reverse

gear is engaged.

Language settings

Select Language.

Change language by touching the

respective entry.

Lighting

Ambient Lighting: Activates or

deactivates the ambient lighting

and adjusts its brightness.

Welcome Lighting: Activates or

deactivates and changes the

duration of welcome lighting.

Exit Lighting: Activates or

deactivates and changes the

duration of exit lighting.

Vehicle settings

Select Vehicle.

In the corresponding submenus the

following settings can be changed:

●

Collision / Detection Systems

Side Blind Spot Alert: Activates

or deactivates side blind spot

alert.

Press SET to open settings menu.

Use touch buttons to operate the

display.

Drowsy Driver Alert: Activates or

●

Remote Lock, Unlock, Start

deactivates the driver

Unit settings

Select System settings.

Change units for Consumption and

Distance and Temperature.

Remote Door Unlock: Changes

the configuration to unlock the

driver's door only or all doors

when pressing O on the remote

control.

Unlock boot only: Activates or

deactivates unlocking the tailgate

drowsiness system.

Speed Limit Information:

Activates or deactivates the

speed limit information by traffic

sign recognition.

Rear View Camera Guidelines:

Activates or deactivates the rear

Confirm with G.

Language settings

Select Languages.

98

Instruments and controls

Change language by touching the

respective entry.

Confirm with G.

Guide-me-home lighting:

Driving functions

Activates or deactivates the

function and adjusts its duration.

Comfort

●

Vehicle settings

Mood lighting: Adjusts the

brightness of the ambient

lighting.

Rear wiper in reverse: Activates

or deactivates automatic

switching on of the rear window

wiper when reverse gear is

engaged.

Vehicle access

Press Í.

Select Driving functions.

In the corresponding submenus the

following settings can be changed:

Door unlock: boot only: Activates

or deactivates unlocking only the

tailgate when pressing T on the

remote control.

Door unlock: driver only:

Changes the configuration to

unlock only the driver's door and

fuel filler flap or all doors, load

compartment and fuel filler flap

when pressing O on the remote

control.

Press Í.

Select Vehicle settings.

In the corresponding submenus the

following settings can be changed:

●

Park Assist: Activates advanced

park assist, a parking maneuver

can be selected.

●

Blind Spot Sensors: Activates or

●

Headlights

deactivates side blind spot alert.

Welcome lighting: Activates or

deactivates the function and

adjusts its duration.

Panoramic view system:

Activation / deactivation of the

function.

●

Safety

Driver attention warning:

Activates or deactivates the

driver drowsiness system.

Instruments and controls

99

confirm that a connection to the

Status LED in the overhead

console

Illuminates green and red and

extinguishes after a short time, when

the ignition is switched on: the system

works properly.

Illuminates red: fault in the system.

Contact a workshop.

Flashes red: backup battery needs

replacement. Contact a workshop.

Telematics services

nearest PSAP is being established.

The LED illuminates steadily as long

as the call is active.

Vauxhall Connect

Vauxhall Connect comprises multiple

connected services accessible via

app, online or within the vehicle.

Pressing the SOS button immediately

a second time will terminate the call.

The LED switches off.

Notice

Automatic crash notification

Full functionality of

In case of an accident with airbag

deployment, an automatic

Vauxhall Connect is subject to

registration and proper activation.

emergency call is established and an

automatic crash notification will be

transmitted to the next PSAP.

Connected services may include live

navigation such as online traffic

information and vehicle status and

information such as maintenance

alerts.

Services accessible within the vehicle

also include emergency call and

breakdown call. These functions are

automatically activated. Terms and

conditions apply.

Emergency call function and

breakdown call function are operated

by the buttons in the overhead

console.

Emergency call

The emergency call function will

establish a connection to the nearest

public safety answering point (PSAP).

A minimum set of data including

vehicle and location information will

be sent to the PSAP.

Breakdown call

Pressing the . button for more than

2 seconds connects you to a roadside

assistance service provider.

For information about coverage and

scope of services of the roadside

assistance, please refer to the

Service and warranty booklet.

Notice

Establishing an emergency call may

not be possible in areas without

sufficient network availability or due

to hardware damage during an

accident.

Privacy settings

Privacy settings of Vauxhall Connect

can be configured in your vehicle.

This will impact the set of data being

In case of an emergency, press the

red SOS button for more than

2 seconds. The LED flashes green to

100

Instruments and controls

sent, e.g., in case a breakdown call is

triggered.The emergency call

function will not be impacted.

Change the privacy settings in the

vehicle by simultaneously pressing

the . button and the SOS button.

Versions with navigation system:

privacy settings can also be changed

in the system settings menu.

Instruments and controls for Your Vauxhall Crossland SUV First Generation (2020-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals