Climate control -> Climate control systems for Your Vauxhall Grandland SUV Second Generation (2025-2026)

Climate control  
161  
automatic mode AUTO  
temperature on front passenger  
side £  
cooling A/C  
manual air recirculation 4  
demisting and defrosting à  
heated rear window and exterior  
mirrors b  
Climate control systems  
Climate control  
Electronic climate control  
system  
Climate control systems ............. 161  
Electronic climate control  
system .................................... 161  
Auxiliary heater ........................ 167  
Temperature preconditioning . . 167  
Air vents ..................................... 168  
Adjustable air vents ................. 168  
Fixed air vents ......................... 169  
Maintenance .............................. 169  
Air intake ................................. 169  
Air conditioning regular  
operation ................................ 170  
Service .................................... 170  
The dual zone climate control allows  
different temperatures for driver side  
and front passenger side.  
In automatic mode, temperature, fan  
speed and air distribution are  
regulated automatically.  
heated windscreen ,  
heated seats ß  
ventilated seats A  
Heated rear window Ü 3 27.  
Heated exterior mirrors Ü 3 24.  
Heated seats ß 3 35.  
Ventilated seats A 3 35.  
Activated functions are indicated by  
the LED in the respective control.  
The electronic climate control system  
is only fully operational when the  
engine is running.  
Make sure the sun sensor on top of  
the instrument panel used by the  
electronic climate control system is  
not covered.  
Controls for:  
temperature on driver side £  
MENU enters the climate control  
settings menu in the Info Display  
fan speed Z  
 
162  
Climate control  
Open all air vents to allow  
optimised air distribution in  
automatic mode.  
Climate control settings menu  
Climate setting menu can be  
displayed in the Info Display.  
Automatic mode AUTO  
Air conditioning must be  
Info Display 3 161.  
activated for optimal cooling and  
demisting. Press A/C to switch on  
air conditioning. The LED in the  
button indicates activation.  
Basic setting for maximum comfort:  
Set the preselected  
temperatures for driver and front  
passenger using the left and right  
rotary knob. Recommended  
temperature is 22 °C.  
air distribution l, M, K  
fan speed Z  
temperature for driver and  
passenger side  
dual zone temperature  
synchronisation MONO  
cooling A/C  
automatic mode AUTO  
maximum air conditioning AC/  
MAX  
Press AUTO, the air distribution  
and fan speed are regulated  
automatically.  
Different pre-set fan speeds can be  
set by turning the rotary knob.  
Turn anticlockwise to decrease or  
turn clockwise to increase the fan  
speed.  
 
Climate control  
163  
Temperature preselection £  
To display the respective pre-set  
speed, first press MENU to enter the  
climate control settings menu and  
then touch OPTIONS on the Info  
Display.  
Following speeds are selectable via  
the rotary knob:  
one bar for a soft and silent air  
distribution.  
two bars for thermal comfort and  
silent air distribution.  
three bars for a dynamic and  
efficient air distribution.  
Set the preselected temperatures  
separately for the driver and the front  
passenger to the desired value using  
the left and right rotary knob. The  
rotary knob on the passenger side  
changes the temperature of the  
passenger side. The rotary knob on  
the driver's side changes the  
temperature of the driver's side or of  
both sides, depending on activation of  
synchronisation MONO in the climate  
control settings menu. Press MENU  
to enter the climate control settings  
menu.  
 
164  
Climate control  
Recommended temperature is 22 °C.  
Temperature is indicated in displays  
beside the rotary knob and in the  
climate settings menu.  
Fan speed Z  
Air distribution l, M, K  
If the minimum temperature Lo is set,  
the climate control system runs at  
maximum cooling, if cooling A/C is  
switched on.  
If the maximum temperature Hi is set,  
the climate control system runs at  
maximum heating.  
Note  
If A/C is switched on, reducing the  
set cabin temperature can cause the  
engine to restart from an Autostop or  
inhibit an Autostop.  
Adjust the air flow by turning rotary  
knob to the desired speed. Turn  
anticlockwise to decrease or turn  
clockwise to increase. Fan speed can  
also be changed in the climate control  
settings menu. Press MENU to enter  
the climate control settings menu.  
Turn rotary knob anticlockwise as far  
as it will go: fan and cooling are  
switched off.  
Press MENU to enter the climate  
control settings menu.  
Touch on the Info Display:  
Stop-start system 3 176.  
: to windscreen and front door  
l
windows  
Manual settings  
Climate control system settings can  
be changed by activating the  
following functions:  
M : to head area and rear seats via  
adjustable air vents  
K : to front and rear foot well and  
windscreen  
To return to automatic air distribution,  
press AUTO.  
To return to automatic mode, press  
AUTO.  
 
Climate control  
165  
Dual zone temperature  
Air conditioning A/C  
Maximum air conditioning AC/MAX  
Press MENU to enter the climate  
control settings menu.  
Touch A/C MAX to activate/  
deactivate maximum air conditioning.  
The maximum air conditioning  
function sets the temperature as low  
as possible and adjusts the  
distribution to all air vents. In addition,  
it sets the air flow to maximum and  
activates the air recirculation.  
synchronisation MONO or SYNC  
Press MENU to enter the climate  
control settings menu.  
Touch OPTIONS to open the climate  
options menu.  
Manual air recirculation 4  
Press A/C to switch on cooling. The  
LED in the button illuminates to  
indicate activation. Cooling is only  
functional when the engine is running  
and climate control fan is switched on.  
Press A/C again to switch off cooling.  
Set D to ON to link passenger side  
temperature setting to the driver side  
The air conditioning system cools and  
dehumidifies (dries) when outside  
temperature is above a specific level.  
Therefore condensation may form  
and drip from under the vehicle.  
If no cooling or drying is required,  
switch off the cooling system for fuel  
saving reasons.  
Touch MONO or SYNC to link  
passenger side temperature setting  
to the driver side.  
When passenger side control dial will  
be adjusted, synchronisation is  
deactivated.  
 
166  
Climate control  
Press 4 to activate the air  
recirculation mode. The LED in the  
button illuminates to indicate  
activation.  
Demisting and defrosting the  
windows à  
Note  
If à is pressed while the engine is  
running, an Autostop will be inhibited  
until à is pressed again.  
Press 4 again to deactivate  
If à is pressed while the engine is in  
an Autostop, the engine will restart  
automatically.  
recirculation mode.  
9 Warning  
Stop-start system 3 176.  
The exchange of fresh air is  
reduced in air recirculation mode.  
In operation without cooling, the  
air humidity increases, so the  
windows may mist up from inside.  
The quality of the passenger  
compartment air deteriorates,  
which may cause the occupants to  
feel drowsy.  
Deactivation of electronic climate  
control system  
Cooling, fan and automatic mode can  
be switched off by turning the rotary  
knob around the AUTO button  
anticlockwise.  
Activation by switching on the fan or  
pressing AUTO.  
Heated rear window, windscreen and  
exterior mirrors b 3 27.  
Press à. The LED in the button  
illuminates to indicate activation.  
Temperature and air distribution  
are set automatically and the fan  
runs at high speed.  
Switch on air conditioning by  
pressing A/C, if required.  
Switch on heated rear window b.  
Switch on heated  
windscreen ,.  
In warm and very humid ambient air  
conditions, the windscreen may mist  
up from outside, when cold air is  
directed towards it. If windscreen  
mists up from outside, activate  
Heated seats ß 3 35.  
windscreen wiper and deactivate l.  
To return to previous mode,  
press à again. To return to  
automatic mode, press AUTO.