Instruments and controls
75
If service is required within the next
3000 km, the remaining distance or
time duration is indicated for several
seconds. Simultaneously C
Engine coolant temperature Engine oil level monitor
gauge
The state of the engine oil level is
displayed in the Driver Information
Centre for a few seconds following
the service information after switching
on the ignition.
A proper state of engine oil level is
indicated by a message.
illuminates permanently as reminder.
If service is required in less than
1000 km, C flashes and then
illuminates permanently. Remaining
distance or time duration is indicated
for several seconds.
Overdued service is indicated by a
message in the Driver Information
Centre which indicates the overdued
distance. C flashes and then
illuminates permanently until service
is executed.
If engine oil level is low, I flashes
Displays the coolant temperature.
grey marking / : normal operating
and a message is indicated,
accompanied by the C indicator.
Confirm engine oil level by using the
dipstick and top up engine oil
respectively.
90
temperature
: temperature too
high
red marking
Engine oil 3 268.
Control indicator o illuminates if
coolant temperature is too high.
Switch off engine immediately.
A fault of measurement is indicated
by a message. Check engine oil level
manually by using the dipstick.
Reset of service interval
After each service, the service
indicator must be reset to ensure
proper functionality. It is
Caution
Service display
If engine coolant temperature is
too high, stop vehicle, switch off
engine. Danger to engine. Check
coolant level.
recommended to seek the assistance
The service system informs when to
change the engine oil and filter or a
vehicle service is required. Based on
driving conditions, the interval at
which an engine oil and filter change
is required can vary considerably.
of a workshop.
If service is executed by yourself,
operate as following:
●
switch off ignition
Service information 3 300.
English 