Get Vehicle care -> Appearance care Guide for Vauxhall Grandland SUV Second Generation (2025-2026)

296

Vehicle care

Screw in the towing eye as far as it will

go until it stops in a horizontal

position.

The lashing eye at the rear

underneath the vehicle must never be

used as a towing eye.

Attach a tow rope – or better still a tow

rod – to the towing eye.

The towing eye must only be used for

towing and not for recovering a

vehicle.

switched off. Remove antenna and

external accessories such as roof

racks etc.

If the vehicle is washed by hand,

make sure that the insides of the

wheel housings are also thoroughly

rinsed out.

Clean edges and folds on opened

doors and the bonnet as well as the

areas they cover.

Clean bright metal mouldings with a

cleaning solution approved for

aluminium to avoid damages.

Appearance care

Exterior care

Locks

The locks are lubricated at the factory

using a high quality lock cylinder

grease. Use a de-icing agent only

when absolutely necessary, as this

has a degreasing effect and impairs

lock function. After using a de-icing

agent, have the locks regreased by a

workshop.

Caution

Washing

The paintwork of your vehicle is

exposed to environmental influences.

Drive slowly. Do not drive jerkily.

Excessive tractive force can

damage the vehicle.

Caution

Always use a cleaning agent with

a pH value of 4 to 9.

Do not use cleaning agents on hot

Bird droppings, dead insects, resin,

pollen and the like should be cleaned

off immediately, as they contain

aggressive constituents which can

cause paint damage.

If using a vehicle wash, comply with

the vehicle wash manufacturer's

instructions. The windscreen wiper

and rear window wiper must be

After towing, unscrew the towing eye.

Insert cap with the upper flange into

the recess and fix cap by pushing.

surfaces.

Do not clean the engine compartment

with a steam-jet or high-pressure jet

cleaner.

Thoroughly rinse and leather-off the

vehicle. Rinse leather frequently. Use

separate leathers for painted and

glass surfaces: remnants of wax on

the windows will impair vision.

Vehicle care

297

Have the door hinges of all doors

greased by a workshop.

Do not use hard objects to remove

spots of tar. Use tar removal spray on

painted surfaces.

When cleaning the rear window from

inside, always wipe in parallel to the

heating element to prevent damage.

For mechanical removal of ice, use a

sharp-edged ice scraper. Press the

scraper firmly against the glass so

that no dirt can get under it and

scratch the glass.

Clean smearing wiper blades with a

soft cloth and window cleaner. Also

make sure to remove any residues

such as wax, insect residues and

similar from the window.

Ice residues, pollution and continuous

wiping on dry windows will damage or

even destroy the wiper blades.

Rims are painted and can be treated

with the same agents as the body.

Paintwork damage

Rectify minor paintwork damage with

a touch-up pen before rust forms.

Have more extensive damage or rust

areas repaired by a workshop.

Exterior lights

Headlight and other light covers are

made of plastic. Do not use any

abrasive or caustic agents, do not use

an ice scraper, and do not clean them

dry.

Underbody

Some areas of the vehicle underbody

have a PVC undercoating while other

critical areas have a durable

Polishing and waxing

Polishing is necessary only if the paint

has become dull or if solid deposits

have become attached to it.

Plastic body parts must not be treated

with wax or polishing agents.

protective wax coating.

After the underbody is washed, check

the underbody and have it waxed if

necessary.

Bitumen / rubber materials could

damage the PVC coating. Have

underbody work carried out by a

workshop.

Glass panel

Use a soft lint-free cloth or chamois

leather together with window cleaner

to clean the glass panel.

Windows and wiper blades

Before and after winter, wash the

underbody and have the protective

wax coating checked.

Switch off wipers before handling in

their areas.

Use a soft lint-free cloth or chamois

leather together with window cleaner

and insect remover.

Wheels and tyres

Do not use high-pressure jet

cleaners.

Clean rims with a pH-neutral wheel

cleaner.

298

Vehicle care

coloured upholstery. Removable

stains and discolourations should be

cleaned as soon as possible.

Clean seat belts with lukewarm water

or interior cleaner.

Towing equipment

Do not clean the coupling ball bar with

a steam-jet or high-pressure jet

cleaner.

Floor mats

9 Warning

If a floor mat has the wrong size or

is not properly installed, it can

interfere with pedals, what can

cause unintended acceleration or

increased stopping distance which

can cause a crash and injury.

Interior care

Interior and upholstery

Only clean the vehicle interior,

including the instrument panel fascia

and panelling, with a dry cloth or

interior cleaner.

Clean the leather upholstery with

clear water and a soft cloth. In case of

heavy soiling, use leather care.

Caution

Close Velcro fasteners as open

Velcro fasteners on clothing could

damage seat upholstery.

The same applies to clothing with

sharp-edged objects, like zips or

belts or studded jeans.

Use the following guidelines for

proper floor mat usage.

●

The original equipment floor mats

were designed for this vehicle. If

the floor mats need to be

Plastic and rubber parts

replaced, it is recommended to

buy certified floor mats which fit

properly and are fixed by the

retainers on the driver side.

The Driver Information Centre and

the displays should only be cleaned

using a soft damp cloth. If necessary

use a weak soap solution.

Plastic and rubber parts can be

cleaned with the same cleaner as

used to clean the body. Use interior

cleaner if necessary. Do not use any

other agent. Avoid solvents and petrol

in particular. Do not use high-

pressure jet cleaners.

Always check that the floor mats

do not interfere with the pedals.

Clean fabric upholstery with a

vacuum cleaner and brush. Remove

●

Use the floor mat with the correct

side up. Do not turn it over.

Do not place anything on top of

the driver side floor mat.

Use only a single floor mat on the

driver side.

stains with an upholstery cleaner.

Clothing fabrics may not be

colourfast. This could cause visible

discolourations, especially on light-

Vehicle care

299

Inserting and removing the floor

mats

The driver side floor mat is held in

place by two retainers.

To install the floor mat:

1. Move the seat backwards as far

as possible.

2. Align slots in the mat with the

retainers, as shown.

3. Push the mat to the floor.

Removing

1. Move the seat backwards as far

as possible.

2. Remove the mat.

Vehicle care -> Appearance care for Your Vauxhall Grandland SUV Second Generation (2025-2026)

Related Topics

Vehicle care

Popular Owner Manuals

Latest Owner Manuals