Instruments and controls
91
synchronisation can take a few
4.2'' Display
minutes. Some transmitters do not
send a correct time signal. In such
cases, it is recommended to switch off
automatic time synchronisation.
Operate the display by the buttons
below the display.
Press the ; button and then select
the Settings icon by turning and
pressing MENU button.
Set date
Date is set automatically.
Select Time menu page.
Return to homepage by pressing ;.
For further information, see
Infotainment system manual
Set time
Select the Set Time menu item to
enter the respective submenu.
Select the Auto Set screen button at
the bottom of the screen. Activate
either On - RDS mode or Off - Manual
mode.
If Off - Manual mode is selected,
adjust hours and minutes by turning
and pressing MENU button.
Repeatedly select the 12-24 Hr
screen button at the bottom of the
screen to choose a time mode.
8'' Display
If outside temperature drops to 3 °C,
a warning message is displayed in the
Driver Information Centre.
Press the ; button and then select
the Settings icon. Inputs can be done
directly by the finger on the touch
screen icons.
9 Warning
Select Time and Date menu page.
The road surface may already be
icy even though the display
indicates a few degrees above
0 °C.
Set time
Select the Set Time menu item to
enter the respective submenu.
If 12-hour mode is selected, a third
column for AM and PM setting is
displayed. Select the desired option.
In On - RDS Mode the RDS signal of
most VHF transmitters automatically
sets the time. RDS time
Clock
Date and time are shown in the
Colour-Info-Display. Colour-Info-
Display operation 3 118