Get Storage -> Load compartment Guide for Vauxhall Insignia 4 Door First Generation (2008-2017)

72

Storage

Storage in the rear armrest

Armrest storage

Load compartment

Storage in the front armrest

Folding down rear seat

backrests

The rear seat backrest is divided into

two parts. Both parts can be folded

down.

Remove the load compartment cover

if necessary.

Press and hold the catch, then push

the head restraints down.

Fold up the rear armrest.

Fold down armrest and open cover.

Close cover before folding the

armrest up.

Push button to fold up the armrest.

Put the seat belts of the outboard

seats into the belt guides.

Storage

73

Pull the release lever on one or both

sides and fold down the backrests

onto the seat cushion.

The backrests are properly engaged

when both red marks on the side near

the release lever are no longer visible.

The seat belt of the centre seat could

be blocked when the backrest is

folded up too quickly. To unlock the

retractor, push in the seat belt or pull

it out by approx. 20 mm and then

release.

To fold up, raise backrests and guide

them into an upright position until they

engage audibly.

Ensure that the seat belts of the

outboard seats are placed in the

corresponding belt guides.

9 Warning

Only drive the vehicle when the

backrests are securely locked into

position. Otherwise there is a risk

of personal injury or damage to the

load or vehicle in the event of hard

braking or a collision.

Opening the pass-through in the

rear centre backrest

Fold down rear armrest.

74

Storage

Load compartment cover

Do not place any objects on the cover.

5-door Hatchback

Removing cover

Pull grip and open the cover.

Suitable for loading long, narrow

objects.

The closed cover can be secured

from inside the load compartment.

Turn knob by 90°:

knob horizontal = cover secured

Ensure the cover engages after

folding up.

from the

passenger

compartment side

= cover not secured

Unhook retaining straps from tailgate.

knob vertical

Storage in the load

compartment

Depending on the equipment, there

are storage boxes under the load

compartment cover.

Storage

75

Opening cover

Removing cover

Pull cover from the side guides.

Push down the handle at the end of

the cover. It rolls up automatically.

Open the load compartment cover.

Fitting cover

Pull the release lever on the right side

up and hold it. Lift the cover first on

the right side and remove from

retainers.

The removed cover can be stored

under the load compartment floor

3 79.

Engage cover in side guides and fold

downwards. Attach the retaining

straps to the tailgate.

Sports Tourer, Country Tourer

Closing cover

Pull the cover towards the rear using

the handle until it engages in the

sideward retainers.

Installing cover

Insert the left side of the load

compartment cover in the recess, pull

the release lever up and hold it, insert

the right side of the load compartment

cover and engage.

76

Storage

Pulling out the floor cover

■ Raise the floor at the handle slightly

until the spring rolls pop-up on each

side.

To return the floor cover to its

original position after unloading

Blind at the tailgate

To cover the load compartment

completely, mount the blind at four

fixing points on the inside of the

tailgate.

■ Raise the floor cover slightly.

Swivel the handle to the front (1)

and push down the spring roll on

each side manually (2). Both spring

rolls must engage in position.

■ Press the button under the handle

and pull out the floor cover until it

engages.

Rear floor storage cover

■ Lower the floor cover (3).

Load the floor in this position.

The pulled out floor cover can be

loaded with max. 120 kg. A warning

label is shown on the floor cover.

Secure objects with lashing straps

attached to lashing eyes 3 77.

Loading information 3 84.

Sliding floor cover (FlexFloor)

For a convenient setting of the load

compartment, the floor cover can be

pulled out.

Sliding back into load compartment

■ Press the button under the handle

and slide in the floor cover until it

engages at the end position.

Leave the floor cover in the raised

position as long as it is loaded.

Storage

77

■ hooks,

■ service box,

■ strap set.

Lashing eyes

9 Warning

Do not load or unload the

compartment by using the sliding

floor cover when the vehicle is

parked on a slope, as the floor

cover could run uncontrolled into

the end positions.

Lift the floor cover up or down only

when unloaded. Danger of injury.

The components are fitted in rails on

both side panels using adapters and

hooks.

Installation of adapters in the

rails

The lashing eyes are designed to

secure items against slippage, e.g.

using lashing straps or luggage net.

Cargo management

system

The FlexOrganizer is a flexible

system for dividing up the load

compartment.

The system consists of:

■ adapters,

Fold open the handle plate, insert the

adapter into the upper and lower

groove of the rail and move to the

required position. Turn the handle

For access to the spare wheel or tyre

repair kit, lift up the floor cover and

attach the retaining strap at the upper

edge of the tailgate recess. Lift up and

attach the cover only without loading.

■ mesh pockets,

78

Storage

plate upwards to lock the adapter. To

remove, turn the handle plate

downwards and move out of the rail.

Net pocket

Installation of hooks in the rails

Variable partition net

Insert the hook in the desired position

first into the upper groove of the rail

and then press into the lower groove.

To remove, first pull out of the upper

groove.

Insert adapters into the required

position in the rails. The net pocket

can be suspended from the adapters.

Insert adapters into the required

position in the rails. Stick together the

halves of the net rods.

To install, push rods together a little

and insert into the relevant openings

in the adapters.

To remove, press the net rods

together and remove from the

adapters.

Storage

79

Service box

Strap set

Alternatively install both hooks in the

lower rail. Plug in the lower brackets

of the box from above into the lower

hooks.

Install two hooks in the upper rail.

Insert the upper brackets of the box

from above into the hooks.

Insert the adapters of the strap set

into a rail. Make sure that the belt is

not twisted.

The strap set has two locks to open.

The belt can be tightened.

Safety net

Two different safety nets can be

installed behind the front seats or rear

seats.

Passengers must not be transported

behind the safety net.

80

Storage

Safety net behind the front seats

Push head restraints of the rear seats

down and fold down rear seat

backrests 3 72.

Safety net cassette behind the

rear seats

Fit the hooks of the small belts into the

Top-Tether mounting loops on the

back side of the folded rear seat

backrests.

Fit the hooks of the wider belts into the

locking devices of the rear seat

backrests.

Pull out the net from the cassette and

latch the rod of the net at one side into

the rear installation opening in the

roof frame. Compress the rod and

latch at the other side.

Front installation openings in the roof

frame: latch rod of the net at one side,

compress rod and latch at the other

side.

Removal of the cassette

Roll up safety net.

Remove load compartment cover

3 74.

Storage

81

To unlock, turn cassette slightly

backwards and remove it upwards

from the retainers.

Insert the cassette into the retainers

on left and right side. Note the signs

L (left side) and R (right side) on the

cassette as an installation hint.

Turn cassette slightly forwards to

lock.

Open the load compartment floor by

pulling the handle. Fold and place the

floor behind the rear seats.

Installation of the cassette

Remove load compartment cover.

Stowage of safety nets and load

compartment cover

Rear safety net cassette can be

placed, together with the load

compartment cover and the coiled up

safety net, under the load

compartment floor.

82

Storage

Put the load compartment cover into

the hollow with the upper side

downwards and with the release lever

in the front right edge.

Sports Tourer, Country Tourer

First aid kit

5-door Hatchback/4-door

Saloon

Warning triangle

5-door Hatchback/4-door

Saloon

Stow the warning triangle in the space

behind the straps on the inside of the

tailgate.

Stow the first aid kit in the space

behind the mesh net on the left side

of the load compartment.

Stow the warning triangle in the space

behind the strap on the right side of

the load compartment.

Storage -> Load compartment for Your Vauxhall Insignia 4 Door First Generation (2008-2017)

Related Topics

Popular Owner Manuals

Latest Owner Manuals