Climate control for Your Vauxhall Insignia 4 Door Second Generation (2018-2022)

Climate control  
139  
Heated rear window and exterior  
Climate control systems  
Air conditioning system  
Climate control  
mirrors b  
Heated windscreen ,  
Heated seats ß  
Climate control systems ............. 139  
Air conditioning system ........... 139  
Electronic climate control  
Some changes of settings are  
indicated briefly in the Info Display.  
Activated functions are indicated by  
the LED in the respective button.  
system .................................... 142  
Auxiliary heater ........................ 148  
Air vents ..................................... 148  
Adjustable air vents ................. 148  
Fixed air vents ......................... 149  
Maintenance .............................. 149  
Air intake ................................. 149  
Air conditioning regular  
operation ................................ 149  
Service .................................... 149  
Fan speed E  
desired speed.  
Adjust the air flow by turning E to the  
clockwise  
: increase  
anti-clockwise : decrease  
Temperature TEMP  
Adjust the temperature by turning  
TEMP to the desired temperature.  
red area : warmer  
blue area : colder  
Illustration shows functions which  
may not be available for your  
particular vehicle.  
Controls for:  
Fan speed E  
Temperature TEMP  
Air distribution ",x and y  
Air conditioning A/C  
Demisting and defrosting á  
Air recirculation n  
External air (  
Heating will not be fully effective until  
the engine has reached normal  
operating temperature.  
140  
Climate control  
Press A/C again to switch off cooling.  
Press á: fan automatically  
switches to higher speed, the air  
distribution is directed towards  
the windscreen.  
Set temperature controller  
TEMP to warmest level.  
Switch on air conditioning A/C if  
required.  
Switch on heated rear window b.  
Switch on heated  
windscreen , if available.  
Open side air vents as required  
and direct them towards the door  
windows.  
For maximum demisting and  
defrosting set fan speed to  
highest level.  
Air distribution ",x and y  
The air conditioning system cools and  
dehumidifies (dries) as soon as the  
outside temperature is slightly above  
the freezing point. Therefore  
condensation may form and drip from  
under the vehicle.  
If no cooling or drying is required,  
switch off the cooling system for fuel  
saving reasons.  
Activated cooling may inhibit  
Autostops.  
Press:  
"
: to windscreen and front door  
windows  
x
: to head area and rear seats via  
adjustable air vents  
y
: to front and rear foot well and  
windscreen  
Combinations are possible.  
Air conditioning A/C  
Stop-start system 3 156.  
Demisting and defrosting the  
windows á  
Notice  
If á is pressed while the engine is  
running, an Autostop will be inhibited  
until á is pressed again.  
If á is pressed while the engine is in  
an Autostop, the engine will restart  
automatically.  
Press A/C to switch on cooling.  
Activation is indicated by the LED in  
the button. Cooling is only functional  
when the engine is running and  
climate control fan is switched on.  
Stop-start system 3 156.  
Climate control  
141  
Air recirculation system n  
External air mode (  
9 Warning  
The exchange of fresh air is  
reduced in air recirculation mode.  
In operation without cooling the air  
humidity increases, so the  
windows may mist up from inside.  
The quality of the passenger  
compartment air deteriorates,  
which may cause the vehicle  
occupants to feel drowsy.  
In warm and very humid ambient air  
conditions, the windscreen may mist  
up from outside when cold air is  
directed towards it. If windscreen  
mists up from outside, activate  
windscreen wiper and deactivate w.  
Press n to activate air recirculation  
Select air recirculation to assist in  
cooling the interior or in blocking  
outside odours or exhaust.  
Press (to activate external air  
Press n to activate air recirculation  
mode. External air mode is  
deactivated.  
mode, LED is indicated.  
mode, LED is indicated.  
Press n again to deactivate air  
recirculation mode.  
On version without heated  
windscreen, press ( to deactivate  
air recirculation. External air mode is  
activated.  
142  
Climate control  
Maximum cooling  
Version with heated  
windscreen ,  
Electronic climate control  
system  
The dual zone climate control allows  
different temperatures for driver side  
and front passenger side.  
In automatic mode, temperature, fan  
speed and air distribution are  
regulated automatically.  
Briefly open the windows so that hot  
air can disperse quickly.  
If the vehicle is equipped with heated  
windscreen, button ( is replaced  
by button ,.  
Heated rear window and exterior  
mirrors b 3 42.  
Heated windscreen , 3 43.  
Heated seats q 3 54.  
Switch on air conditioning A/C.  
Press n for air recirculation  
system on.  
Press x for air distribution.  
Set temperature control TEMP to  
coldest level.  
Illustration shows functions which  
may not be available for your  
particular vehicle.  
Set fan speed E to highest level.  
Open all vents.  
Climate control  
143  
Controls for:  
Climate setting menu can also be  
displayed by touching button g in the  
Info Display 3 116.  
Climate setting menu CLIMATE  
rotary knob for temperature on  
driver side  
Changes of settings via the controls  
are indicated as pop up in the  
Info Display.  
rotary knob for temperature on  
passenger side  
CLIMATE enters the Climate  
setting menu in the Info-Display  
Fan speed increase ( and  
decrease )  
Automatic mode AUTO  
Climate control ON/OFF or â  
Automatic mode AUTO  
Manual air recirculation n  
Settings for  
Demisting and defrosting à  
Air distribution w, x, y  
Heated rear window and exterior  
mirrors b  
Fan speed E  
Heated windscreen ,  
Heated seats q  
Temperature for driver and  
passenger side 23°/25°  
Dual zone temperature  
synchronisation SYNC  
Ventilated seats r  
Basic settings for automatic control  
with maximum comfort:  
Activated functions are indicated by  
the LED in the respective control.  
The electronic climate control system  
is only fully operational when the  
engine is running.  
Air conditioning A/C  
Press AUTO, the air distribution  
and fan speed are regulated  
automatically.  
can be triggered manually in the  
Climate setting menu. Press  
CLIMATE to enter the menu and  
follow the touch buttons.  
Open all air vents to allow  
optimised air distribution in  
automatic mode.  
144  
Climate control  
Cooling must be activated in the  
climate setting menu for optimal  
cooling and demisting. Press  
Climate to enter the menu and  
follow the touch button to switch  
on air conditioning A/C.  
Fan speed ( )  
Air distribution w, x, y  
Set the preselected  
temperatures separately for  
driver and front passenger using  
the left and right rotary knob.  
Recommended temperature is  
22 °C. Temperature is indicated  
briefly in displays beside the  
rotary knobs and in the climate  
setting menu.  
Press Climate to enter the menu.  
Touch:  
Press upper button ( to increase or  
lower button ) to decrease fan speed.  
The fan speed is indicated as pop-up  
in the Info Display. Fan speed can  
also be changed by touch buttons in  
the climate setting display. Press  
Climate to enter the menu.  
Pressing the lower button ) for longer:  
fan and cooling are switched off.  
To return to automatic mode: press  
AUTO.  
Air recirculation mode n  
should be deactivated. When  
deactivated the LED in the button  
is not illuminated.  
w
: to windscreen and front door  
windows  
x
: to head area and rear seats via  
adjustable air vents  
Manual settings  
y
: to front and rear foot well and  
windscreen  
Climate control system settings can  
be changed by activating the buttons  
and rotary knobs as described below.  
Changing a setting will deactivate the  
automatic mode.  
To return to automatic air distribution  
press AUTO.  
Climate control  
145  
Temperature preselection  
If the minimum temperature Lo is set,  
the climate control system runs at  
maximum cooling, if cooling A/C is  
switched on.  
Air conditioning A/C  
If the maximum temperature Hi is set,  
the climate control system runs at  
maximum heating.  
Notice  
If A/C is switched on, reducing the  
set cabin temperature can cause the  
engine to restart from an Autostop or  
inhibit an Autostop.  
Stop-start system 3 156.  
Set the preselected temperatures  
separately for driver and front  
passenger to the desired value using  
the left and right rotary knob. The  
knob on the passenger side changes  
the temperature for the passenger  
side. The knob on the driver's side  
changes the temperature for the  
driver's side or for both sides  
Press Climate to enter the menu and  
select the touch button A/C to switch  
air conditioning on or off.  
Cooling is only functional when the  
engine is running and climate control  
fan is switched on.  
The air conditioning system cools and  
dehumidifies (dries) when outside  
temperature is above a specific level.  
Therefore condensation may form  
and drip from under the vehicle.  
If no cooling or drying is required,  
switch off the cooling system for fuel  
saving reasons.  
Dual zone temperature  
synchronisation SYNC  
Press Climate to enter the menu.  
Touch SYNC to link passenger side  
temperature setting to the driver side.  
When passenger side settings will be  
adjusted, synchronisation is  
deactivated and the LED  
extinguishes.  
depending on activation of  
synchronisation SYNC.  
Recommended temperature is 22 °C.  
Temperature is indicated in displays  
beside the rotary knobs and as pop-  
up in the Info Display.  
146  
Climate control  
Manual air recirculation n  
Demisting and defrosting the  
windows à  
compartment air deteriorates,  
which may cause the vehicle  
occupants to feel drowsy.  
In warm and very humid ambient air  
conditions, the windscreen may mist  
up from outside, when cold air is  
directed towards it. If windscreen  
mists up from outside, activate  
windscreen wiper and deactivate w.  
Automatic air recirculation  
An air humidity sensor switches  
automatically to external air if internal  
air humidity is too high.  
Press n to activate the air  
recirculation mode. The LED in the  
button illuminates to indicate  
activation.  
Press à. The LED in the button  
illuminates to indicate activation.  
Temperature and air distribution  
are set automatically and the fan  
runs at high speed.  
Press n again to deactivate  
recirculation mode.  
Activate air condition: Press  
CLIMATE to show climate control  
menu in the Info Display, then  
select A/C.  
9 Warning  
The exchange of fresh air is  
reduced in air recirculation mode.  
In operation without cooling the air  
humidity increases, so the  
windows may mist up from inside.  
The quality of the passenger  
Switch on heated rear window b.  
Climate control  
147  
Switch on heated  
Deactivation or activation of  
Electronic climate control system  
ON/OFF  
Version with heated  
windscreen ,  
windscreen , if available.  
To return to previous mode press  
à again, to return to automatic  
mode press AUTO.  
Notice  
If à is pressed while the engine is  
running, an Autostop will be inhibited  
until à is pressed again.  
If à is pressed while the engine is in  
an Autostop, the engine will restart  
automatically.  
Stop-start system 3 156.  
If the vehicle is equipped with heated  
windscreen, button ON/OFF is  
replaced by button ,.  
Climate control system will then  
switched off by button â. Switch on  
by pressing (.  
Cooling, fan and automatic mode can  
be switched off by pressing ON/OFF.  
When the system is deactivated, the  
LED in the button ON/OFF is not  
illuminated.  
Activation by pressing ON/OFF again  
or AUTO. The LED in the button  
illuminates to indicate activation.  
148  
Climate control  
Basic settings  
Following settings can be changed in  
the Personalisation menu in the  
Info Display:  
Air vents  
Adjustable air vents  
At least one air vent must be open  
while cooling is on.  
fan speed regulation in automatic  
mode  
settings of automatic rear window  
heating  
settings of automatic windscreen  
dehumidification  
settings of automatic seat  
heating  
Illustration shows outer air vents in  
instrument panel.  
Vehicle personalisation 3 122.  
Heated rear window and exterior  
mirrors b 3 42.  
Heated windscreen , 3 43.  
Heated seats q 3 54.  
Illustration shows centre air vents in  
instrument panel.  
Ventilated seats r 3 54.  
Auxiliary heater  
Air heater  
Quickheat is an electric auxiliary air  
heater which automatically warms up  
the passenger compartment more  
quickly.  
Illustration shows air vents for rear  
passenger.  
Climate control  
149  
Direct the flow of air by tilting and  
swivelling the slats.  
To close the vent, swivel the slat  
sideways.  
Air conditioning regular  
operation  
Maintenance  
Air intake  
In order to ensure continuously  
efficient performance, cooling must  
be operated for a few minutes once a  
month, irrespective of the weather  
and time of year. Operation with  
cooling is not possible when the  
outside temperature is too low.  
9 Warning  
Do not attach any objects to the  
slats of the air vents. Risk of  
damage and injury in case of an  
accident.  
Service  
Fixed air vents  
For optimal cooling performance, it is  
recommended to annually check the  
climate control system, starting  
three years after initial vehicle  
registration, including:  
Additional air vents are located  
beneath the windscreen and door  
windows and in the foot wells.  
The air intake in front of the  
windscreen in the engine  
compartment must be kept clear to  
allow air intake. Remove any leaves,  
dirt or snow.  
functionality and pressure test  
heating functionality  
leakage check  
check of drive belts  
cleaning of condenser and  
evaporator drainage  
Cabin air filter  
Change filter regulary for maximum  
effect.  
performance check  
cabin air filter check