Storage -> Safety net for Your Vauxhall Insignia 4 Door Second Generation (2018-2022)

Storage  
81  
Mounting carriages in the rail  
Using the lashing eyes  
Passengers must not be transported  
behind the safety net.  
Installation  
Behind the rear seats  
Press the button on a carriage and  
slide it to the required position. Fold  
out the lashing eyes to use them.  
Insert carriages into the rails at the  
load compartment floor. Thereby use  
the recess in the rail and press the  
button on the carriage while inserting  
it.  
Removing  
Insert the cassette into retainers  
on left and right side. Note the  
signs L (left side) and R (right  
side) on the cassette as an  
installation hint.  
Retract the lashing eyes. Press the  
button of a carriage and remove it  
from the rail through the recess.  
Safety net  
Turn cassette slightly forward  
until the arrows face each other,  
to lock the cassette.  
The safety net can be installed behind  
the rear seats. If the rear seat  
backrests are folded, the safety net  
can be installed behind the front  
seats.  
82  
Storage  
Behind the front seats  
Pull holding rod out of cassette.  
Suspend and engage holding rod  
into an installation opening on  
one side of the roof frame.  
Attach hooks of safety net  
cassette to lashing eyes in the  
floor in front of rear seats. To get  
access to the lashing eyes, push  
hooks in the perforated parts in  
the floor cover on both sides.  
Suspend and engage holding rod  
into installation opening on one  
side of the roof frame. Compress  
rod, suspend and engage at the  
other side. Pull holding rod out of  
cassette.  
Compress rod and suspend and  
engage at the other side.  
Remove load compartment cover  
3 78.  
Tension both straps by pulling at  
the loose end.  
Push down head restraints and  
fold down rear seat backrests  
3 75.  
Storage  
83  
Behind the front seats  
Removal  
Warning triangle  
Behind the rear seats  
Grand Sport  
Remove and compress one side  
of holding rod from installation  
opening. Remove other side of  
holding rod from installation  
opening.  
Roll up safety net.  
Pull the flap at the tightener on  
both sides to release the straps.  
Remove and compress one side  
of holding rod from installation  
opening. Remove other side of  
holding rod from installation  
opening.  
Stow the warning triangle in the  
recess at the rear of the load  
compartment.  
Roll up safety net.  
Detach hooks from the lashing  
eyes.  
Turn cassette slightly backwards  
to unlock and remove from  
retainers.