88
Instruments, Controls
If it flashes:
Fuel supply exhausted, refuel immediately.
Never let the tank run dry!
Erratic fuel supply can cause catalytic
converter to overheat, see page 145.
Diesel engines:
If the tank is run dry, bleed the fuel system
as described on page 170.
!
Preheating system for diesel engines 3,
diesel particle filter 3
Control indicator illuminates in yellow.
Preheating system active, switches on only
if outside temperature is low.
Picture no: 17876s.tif
Picture no:
S
v
Engine oil level 3
Control indicator illuminates in yellow.
Electronic Stability Programme
If it flashes (with diesel particle filter):
Diesel particle filter must be cleaned.
Continue driving, and as soon as road and
traffic conditions allow, increase speed to
over 25 mph (40 km/h) to start cleaning of
the diesel p artic le filter. The control
indicator goes out when cleaning is
complete. We recommend not turning off
the ignition during cleaning.
(E SP®Pl us) 3
Control indicator flashes or illuminates in
yellow.
In vehicles with engine oil level check, the
oil level is checked automatically .
If it flashes during driving:
System actively engaged, see page 149.
If it illuminates when the engine is running:
Engine oil level too low. Check engine oil
level and top up engine oil if necessary, see
page 228.
If it illuminates while driving:
Fault in Electronic Stability Programme,
see page 149.
EPS1)
Further information – see page 148.
E lec tric Power St eering
Control indicator illuminates in yellow.
Y
Fuel level
Control indicator illuminates or flashes in
Fault in Electric Power Steering. Vehicle can
still be driven, but greater force is required
for steering. Contact a workshop
immediately.
yellow.
If it illuminates:
Low fuel level, fuel gauge in reserve area.
1)
EPS = Electric Power Steering.