2003-2010 Vauxhall Meriva SUV Instruments, Controls -> Information display User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments, Controls -> Information display for Your Vauxhall Meriva SUV First Generation (2003-2010)

92  
Instruments, Controls  
For Infotainment system, see Infotainment  
system operating instructions.  
An F in the display indicates a fault.  
Have the cause eliminated by a workshop.  
Ü Board Computer  
19,5° 19:36  
All values  
BC 1  
BC 2  
12:01 17,0°C  
257.0  
miles  
mph  
Timer  
1
Ø
40  
FM 3 90,6MHz  
REG  
AS  
RDS  
TP  
7.0  
Ø 31.0  
ga ls  
8
mpg  
Picture no: 17913s.tif  
Picture no: 16719t.tif  
Graphical Information Display 3,  
Colour Information Display 3  
Information display  
Triple Information Display 3  
Display of time, outside temperature and  
date / Infotainment system (when it is on).  
Display of time, outside temperature and  
date / Infotainment system (when it is on).  
The Graphical Information Display  
presents the information in monochrome.  
The Colour Information Display presents  
the information in colour.  
When the ignition is off, the time, date and  
outside temperature can be made to  
appear for approx. 15 seconds by briefly  
pressing one of the two buttons adjacent  
to the display.  
The information that is displayed depends  
on the Infotainment system configuration.  
An F in the display indicates a fault.  
Have the cause eliminated by a workshop.  
Some information appears in the display in  
an abbreviated form.  
Instruments, Controls  
93  
9 Warning  
Caution: The road surface may already  
be icy, even though the display ind ic ates  
a few degrees above 0 °C.  
:
8:56 -5,5°C  
07.04.2004  
Slippery road  
-2,5°C  
OK  
Picture no: 17913s.tif  
Picture no: 16707t.tif  
In vehicles with Graphical Information  
Display 3 or Colour Information Display 3,  
an icy road surface warning message  
appears in the display.  
Outside temperature  
A fall in temperature is indicated  
immediately and a rise in temperature  
after a time delay.  
No message is disp la yed if the  
temperature is less than -5 °C.  
If the external temperature falls to 3 °C, to  
warn of ice on the road the symbol :  
appears in the Triple Information Display.  
When the temperature climbs, the  
symbol : goes out above 5 °C.  
94  
Instruments, Controls  
Correcting time:  
Deactivating / activating automatic time  
synchronisation: With Infotainment system  
off, press Ö and ; next to the dis play:  
Some RDS transmitters do not send a  
correct time signal. If the incorrect time is  
displayed on frequent occasions,  
deactivate automatictime synchronisation  
– see next column, and set the time  
manually.  
Hold down Ö for approx. 2 sec., clock  
display is now in setting mode,  
Press Ö twice (until year flashes).  
8:56 5,5°C  
Press Ö and hold down for approx.  
3 seconds until } flashes in display 3  
and text "RDS TIME" appears (years  
flash during this time),  
The automatic setting is indicated by } in  
the display.  
07.04.2004  
Press ;; display shows:  
RDS TIME 0 = Off  
Press ;; display shows:  
RDS TIME 1 = On  
Picture no: 17914s.tif  
Triple Information Display  
Press Ö three times.  
Set date and time  
With Infotainment system off,  
press Ö and ; next to the display as  
follows:  
Press Ö for approx. 2 seconds:  
Day flashes  
;: Set day  
Ö: Month flashes  
;: Set month  
Ö: Year flashes  
;: Set year  
Ö: Hours flash  
;: Set hours  
Ö: Minutes flash  
;: Set minutes  
Ö: Clock is started.  
Instruments, Controls  
95  
FM AS  
[TP]  
REG  
CDin  
MP3  
ᕃ
90.6 MHz  
19,5°  
19:36  
Picture no: 16711t.tif  
Picture no: 15593t.tif  
Picture no: 15559t.tif  
To select with four-way button  
Selection with the multi-function knob 3  
Turn:  
Graphical Information Display 3  
or Colour Information Display 3,  
selecting functions  
Select menu items via menus and with the  
buttons / four-way button of the  
Infotainment sy stem.  
Highlighting of menu options or  
commands, selection of function ranges.  
Functions and their menus are shown in the  
Graphical Information Display and Colour  
Information Display.  
Press:  
Selection of highlighting, confirmation of  
commands.  
These functions are highlighted or  
To exit a menu, turn the multi-function  
knob left or right to Return or Main and  
select.  
executed in the m enu display via the  
four-waybutton, the multi-function knob 3  
on the Infotainment System or the remote  
control buttons 3 on the steering wheel.  
6
96  
Instruments, Controls  
7
Settings  
19,5° 19:36  
19:36  
FM AS  
[TP]  
REG  
CDin  
MP3  
Time, Date  
Language  
Units  
ᕃ
90.6 MHz  
10 . 07 .2004  
Contrast  
Day / Night  
6 Ign. logic  
19,5°  
19:36  
Picture no: 14034s.tif  
Picture no: 16711t.tif  
Picture no: 16712t.tif  
Selection using remote control buttons 3  
on steering wheel  
For each functional area, there is a main  
page (Main), which is selected at the top  
edge of the d isplay (not with the  
System settings  
The settings are accessed via the Settings  
Select menu options via menus and with  
the buttons.  
menu.  
Infotainment system CD 30 without the  
hands-free mobile phone system):  
Press the Main button 3 (not found on all  
Infotainment systems) on the Infotainment  
system (call up main display).  
z Audio,  
z Navigation 3,  
z Telephone 3,  
z Trip computer 3.  
Press the Settings button on the  
Infotainment system. For Infotainment  
system CD 30, no menu may be selected.  
Function areas audio, navigation 3 and  
telephone 3 – see Infotainment sy stem  
operating instructions.  
The Settings menu is displayed.  
Instruments, Controls  
97  
Correcting time:  
Some RDS transmitters1) do not send  
correct time signals. If the incorrect time is  
frequently displayed, deactivate  
automatic time synchronisation andset the  
time manually.  
7
Time, Date  
Time  
19,5° 19:36  
19:36  
7
Settings  
19,5° 19:36  
Time, Date  
Language  
Units  
Deutsch  
English  
Español  
...  
To correct tim e with the help of RDS, select  
menu item Synchron. clock automatical.  
from the Time, Date menu.  
Date  
10 . 07 .2004  
Contrast  
The box in front of Synchron. clock  
automatical. will be ticked – see  
Fig. 16713 T.  
Day / Night  
6 Ign. logic  
6 Synchron. clock automatical.  
Picture no: 16713t.tif  
Picture no: 16714t.tif  
Setting the date and time 3  
Select menu item Time, Date from the  
Settings menu.  
Language selection  
You can select the display language for  
some functions.  
The menu for Time, Date is displayed.  
Select the menu items required.  
Make the desired setting.  
Select menu item Language from the  
Settings menu.  
The available languages are displayed.  
6
1)  
RDS = Radio Data Sys tem.  
98  
Instruments, Controls  
7
13 Languages  
19,5° 19:36  
7
Contrast  
19,5° 19:36  
7
Settings  
19,5° 19:36  
Time, Date  
Language  
Units  
X Deutsch  
English  
~ Europe-SI  
Español  
| Japan  
12  
Nederlands  
Contrast  
| Great Britain  
| USA  
Français  
Italiano  
Day / Night  
6 Ign. logic  
Picture no: 16715t.tif  
Picture no: 16716t.tif  
Picture no: 16717t.tif  
Select the desired language.  
Setting units of measure  
Ad just ing contra st 3  
You can select which units of measure are  
(Graphical Information Display)  
Select menu item Contrast from the  
Settings menu.  
Selections are indicated by a 6 in front of  
to be used.  
the m enu item .  
Select menu item U nits from the Settings  
menu.  
In systems with voice output 3, w hen the  
language settingof the display is changed,  
the system will ask whether the  
announcement language should also be  
changed – see Infotainment system  
operating instructions.  
The menu for Contrast is displayed.  
The available units are displayed.  
Select the desired unit.  
Confirm the required setting.  
Selections are indicated by a o in front of  
the menu item.  
Instruments, Controls  
99  
Setting display illumination 3  
The display can be adjusted to suit the  
lighting conditions, black or coloured text  
on a light background or white or coloured  
text on a dark background.  
Ü Board Computer  
19,5° 19:36  
All values  
BC 1  
Select menu item Day / Night from the  
Settings menu.  
Range  
Inst. Consumpt.  
Aver. Consump.  
257 miles  
31 mpg  
31 mpg  
BC 2  
257.0  
miles  
mph  
Timer  
1
The options are displayed.  
Ø
40  
Automatic:  
Adapted based on vehicle lighting.  
7.0  
Ø 31.0  
ga ls  
8
mpg  
19,5°  
19:36  
Alw ays da y design:  
Black or coloured text on light background.  
Always night design:  
White or coloured text on dark  
background.  
Picture no: 16719t.tif  
Picture no: 16710t.tif  
Range  
Graphical Information Display 3  
or Colour Information Display 3,  
trip computer 3  
Range is calculated from current fuel tank  
content and instantaneous consumption.  
The display shows average values.  
Selections are indicated by a o in front of  
the m enu item .  
The trip computers provide information on  
driving data, which is continually recorded  
and evaluated electronically.  
Ig nition logic 3  
See Infotainment sy stem opera ting  
instructions.  
When the vehicle has been refuelled, the  
range is updated automatically after a  
brief delay.  
The on-board computer main page gives  
information on range, instantaneous  
consumption and average consumption 3.  
To display the other trip computer driving  
information, press BC button on  
Infotainment sy stem 3 or select trip  
computer menu on display.  
For vehicles with Infotainment  
System CD 30 3 and steering wheel rem ote  
control 3, the left-hand steering wheel  
buttons only operate the trip computer.  
100  
Instruments, Controls  
Distance travelled  
Display of miles / kilometres travelled.  
The measurement can be reset to zero at  
any time and restarted, see next column.  
Ü Board Computer  
19,5° 19:36  
All values  
BC 1  
Average speed  
Calculation of average speed.  
BC 2  
257.0  
Ø 40  
miles  
mph  
Range  
23 miles  
The measurement can be reset to zero at  
any time and restarted, see next column.  
Timer  
1
Stoppages in the journey with the ignition  
off are not included in the calculations.  
7.0  
Ø 31.0  
ga ls  
8
mpg  
OK  
Effective consumption  
Display of fuel used.  
The measurement can be reset to zero at  
any time and restarted, see next column.  
Picture no: 16718t.tif  
Picture no: 16719t.tif  
If less than 30 miles (50 km) can be driven  
with the fuel remaining in the tank, the  
warning "Range" appears on the display.  
Reset trip computer information  
The following trip computer information  
can be reset (restart measurements):  
Average consumption  
Calculation of average consumption.  
If less than 20 miles (30 km) can be driven  
with the fuel remaining in the tank, the  
warning "Please refuel!" 3 appears on the  
display.  
z Distance travelled,  
z Average speed,  
z Effective consumption,  
z Average consumption.  
The measurement can be reset to zero at  
any time and restarted, see next column.  
Acknowledge the menu item as described  
on page 95.  
Select BC 1 or BC 2 from the trip computer  
menu.  
Instantaneous consumption  
Display changes depending on speed:  
Display in gal/h  
below 8 mph  
(13 km/h),  
Display in mpg  
above 8 mph  
(13 km/h).  
Instruments, Controls 101  
Interruption of power supply  
If the power supply has been interrupted or  
if the battery voltage has droppedtoo low,  
the values stored in the trip computer will  
be lost.  
Ü Reset BC 1  
19,5° 19:36  
Ü Reset BC 1  
19,5° 19:36  
All values  
All values  
257.0  
40  
m iles  
m ph  
257.0  
m iles  
Ø
Ø
40  
7.0  
Ø 31.0  
m ph  
7.0  
Ø 31.0  
gals  
m pg  
gals  
m pg  
Picture no: 16720t.tif  
Picture no: 16721t.tif  
The information of both tripcomputers can  
To reset all trip computer information,  
be reset separately and therefore p rovid es  
a facility for evaluating information over  
different time periods.  
select menu item All values.  
After resetting, "- - -" is displayed with the  
trip computer information selected. The  
recalculated values are displayed after a  
brief delay.  
Select the desired trip computer  
information.  
The value for the selected function will b e  
reset and recalculated.  
102  
Instruments, Controls  
The stop watch information to be  
displayed can be selected via menu  
Options 3:  
Ü Board Computer  
BC 1  
BC 2  
Timer  
19,5° 19:36  
Driving Time excl. Stops  
Measurement of the time the vehicle is in  
motion. Stationary time is not included.  
00:00:00  
Driving Time incl. Stops  
Measurement of the time the vehicle is in  
motion. The time the vehicle is stationary  
with the key in the starter switch is  
included.  
Start  
Reset  
Options  
Tr avel Time  
Measurement of the time from manual  
activation via Startto manualdeactivation  
via Reset.  
Picture no: 16722t.tif  
Stop watch  
Select menu item Timer from the Board  
Computer menu.  
The Timermenu is displayed.  
To start, select menu item Start.  
To reset, select menu item Reset.  

Related Topics

Instruments, Controls
Control indicators Instrument display Warning buzzers Windscreen wiper Windscreen wash system and headlight wash system Rear window wash and wiper system

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot