Lighting -> Lighting features for Your Vauxhall Vivaro Van Third Generation (2019-2026)

Lighting  
141  
Illustration shows rear courtesy lights.  
This function can be activated or  
deactivated in the vehicle  
personalisation 3 127.  
The following lights will additionally  
switch on when the driver's door is  
opened:  
Lighting features  
Sunvisor lights  
Centre console lighting  
Illuminates when the cover is opened.  
A spotlight integrated in the overhead  
console illuminates the centre  
console when headlights are  
switched off.  
illumination of some switches  
Driver Information Centre  
The brightness can be adjusted in the  
vehicle personalisation 3 127.  
Exit lighting  
Entry lighting  
Welcome lighting  
The following lights are switched on if  
the key is removed from the ignition  
switch:  
Some or all of the following lights are  
switched on for a short time by  
unlocking the vehicle with the radio  
remote control:  
interior lights  
instrument panel light  
They will switch off automatically after  
a delay. This function works only in  
the dark.  
headlights  
tail lights  
interior lights  
Path lighting  
Headlights, tail lights and number  
plate lights illuminate the surrounding  
area for an adjustable time after  
leaving the vehicle.  
The number of activated lights  
depends on the surrounding light  
conditions.  
The lighting switches off immediately  
when the ignition is switched on.  
Starting off 3 18.  
142  
Lighting  
Manual path lighting  
Automatic path lighting  
Press D a second time to switch off  
Path lighting is activated, when the  
ignition is switched off and the driver's  
door is opened.  
peripheral lighting.  
Battery discharge protection  
This function can be activated or  
deactivated in the vehicle  
personalisation 3 127.  
To prevent discharge of the vehicle  
battery when the ignition is switched  
off, some interior lights are switched  
off automatically after some time.  
Info Display 3 123.  
Vehicle locator lighting  
This function allows to locate the  
vehicle, e.g., in weak lighting  
conditions using the remote control.  
The headlights come on and the turn  
lights flash for 10 seconds.  
Press N on the remote control.  
The vehicle must be locked more than  
5 seconds.  
To switch on the manual path lighting,  
switch off the ignition, open the  
driver's door and pull the indicator  
lever.  
If the driver's door is not closed, the  
lights switch off after several seconds.  
To switch off the manual path lighting  
pull the lever again while the driver's  
door is open.  
The duration of the path lighting can  
be set in the vehicle personalisation  
3 127.  
Peripheral lighting  
Peripheral lighting allows you to  
switch on the position lights, low  
beam and number plate lighting using  
the remote control.  
Press D on the remote control to  
switch on peripheral lighting.  
Info Display 3 123.