Get Storage Guide for Vauxhall Vivaro Van Third Generation (2019-2026)

78

Storage

Some versions have a power outlet,

AUX input and the switch for the front

passenger airbag deactivation in the

storage compartment.

The glovebox should be closed whilst

driving.

Storage compartments

Storage

9 Warning

Storage compartments ................ 78

Glovebox ................................... 78

Cupholders ................................ 78

Front storage ............................. 79

Underseat storage ..................... 80

Load compartment ....................... 81

Load compartment cover ........... 81

Lashing eyes ............................. 82

Cargo management system ...... 82

Safety net .................................. 84

Do not store heavy or sharp

objects in the storage

compartments. Otherwise vehicle

occupants could be injured by

objects being thrown around in the

event of hard braking, a sudden

change in direction or an accident.

Cupholders

Front cupholder

Glovebox

Additional storage features .......... 86

Folding tray ................................ 86

Table ......................................... 87

Roof rack system ......................... 90

Roof rack ................................... 90

Loading information ..................... 91

Cup holders are located at the sides

of the instrument panel.

To open the glovebox pull the handle.

Storage

79

Cupholders for the third row seats can

be located in the sides of the load

compartment.

Rear cupholder

Front storage

A cupholder for the second row seat

can be located in the storage

compartment in the footwell.

To open the storage compartment

press the button and open the cover.

Some versions have a glovebox

cooler in the storage compartment.

Fold up the multifunctional table.

Multifunctional table 3 87.

80

Storage

Underseat storage

Storage box

To open the storage compartment

press the button and open the cover.

Folding tray 3 86.

There may be a storage box under the

centre and left bench seat. Lift up the

seat cushion.

Depending on version the storage

box can be removed from the back to

accommodate long objects.

There may be a storage box under the

centre bench seat next to the driver

seat. Lift up the seat cushion by

pulling the handle.

Storage

81

●

Seat in the second row in the

Load compartment

Depending on version, the load

compartment area can be increased

by folding up or removing the seats in

the second and third row.

tilted position: respective seat in

the third row must not be

occupied.

Folding the passenger seat 3 50.

Folding or removing the rear seats

3 52.

●

Single bench seat in the second

or third row in the tilted position:

the center seat must not be

occupied.

Vehicle version with seat benches

in second and third row

When loading the following has to be

observed:

Load compartment cover

Do not place any objects on the cover.

●

Only store objects on seats of the

third row folded down to the table

position, when the seats in the

second row are also folded down

to the table position.

●

Seat in the second row folded

down to the table position:

respective seat in the third row

must not be occupied.

●

Bench seat in the second or third

row in the tilted position: the outer

seat must not be occupied.

Raise the load compartment cover to

remove it.

To install the load compartment cover

insert it in the retainers on both sides.

82

Storage

1. Release the locking device, lower

the flap and then remove it.

Lashing eyes

Cargo management system

Flap behind the passenger seat

Depending on version, a partition

behind the front seats protects the

driver and front passengers against

the risk of load movement.

2. Stow the flap behind the driver's

seat.

There may be a flap in the partition

behind the passenger seat which can

be removed to accommodate long

objects.

If the outer passenger seat is folded

and the flap is open, the centre seat

has to stay free.

The lashing eyes are designed to

secure items against slippage, e.g.

using lashing straps or luggage net.

Removing the flap

Turn the locking device upwards.

Put the hinges of the flap in their

housing, lift the flap and close the

locking device.

Lashing eyes may be located on the

vehicle floor. The number and

location of the lashing eyes may vary

depending on the vehicle.

Storage

83

Sliding the flap

2. Fix the net like shown on the

picture.

4. Attach the hooks to the lashing

eyes in the glovebox and on the

floor.

After transportation remove the

protective net and fold down the seat.

Slide the flap to the side. It is kept in

position by magnets.

Fitting the protective net

The protective net must be installed

whenever the bench seat of the front

passenger side is folded and the

partition flap is open.

Second row bench seat in the

commercial vehicle

The bench seat in the second row can

be folded to increase the load

compartment.

1. Lift the seat cushion of the bench

seat of the front passenger side.

Seat folding 3 50.

3. Fit the attachment in the opening.

To lock the attachment turn it

clockwise a quarter turn.

84

Storage

Pull the loop upwards to unlock

the bench seat.

2. Raise the bench seat taking the

handle and fold the bench seat to

the front until it is engaged.

Safety net

Safety net behind the seats

Depending on version, the safety net

can be installed behind the second

row seats, the third row seats or

behind the front seats.

To increase the loading capacity the

seats behind the safety net can be

folded or removed.

Rear seats 3 52.

Seat backrests in front of the safety

net must be raised up.

Passengers must not be transported

behind the safety net.

9 Warning

When seats are being adjusted or

folded, keep hands and feet away

from the moving area. Risk of

injury.

Ensure that there are no objects

on the anchor points or rails.

Never adjust seats while driving as

they could move uncontrollably.

Drive only with engaged seats and

Unfolding

backrests.

Folding

1. To restore the bench seat to the

original position pull the loop to

unlock it.

2. Take the handle to fold the bench

seat to the back until it is engaged

in the original position.

Tilt up the head restraints.

1. Tilt the head restraints to the front.

Storage

85

Installation in the roof frame

Insert the fixings in the floor

anchorages on both sides. To lock

the fixings turn them clockwise a

quarter turn. Place them as close

as possible to the end of the rail.

c) Installation with fixed rear seats

Attach the hooks of safety net

straps in the lashing eyes.

Lashing eyes 3 82.

b) Installation with rear seats on

rails

1. There are installation openings on

both sides in the roof frame. If

present, open the covers.

2. Suspend and engage the rod of

net at one side, compress rod and

suspend and engage at the other

side.

Insert the fixings in the floor

anchorages on both sides.

Installation on the floor

1. a) Installation with lashing eyes

86

Storage

Safety net on the floor

Additional storage

features

Folding tray

It is possible to install the safety

net together with folded seats.

Attached to the lashing eyes on the

rear floor, it allows objects to be held

down.

Folded seats 3 52.

2. Tension both straps by pulling at

the loose end.

Lashing eyes 3 82.

Trays may be located on the

backrests of the front seats.

Fold down the tray. The tray contains

a cupholder and a strap to secure

objects.

Do not place any hard or heavy

objects on the tray.

Storage

87

Document tray in the centre

seatback

Table

Multifunctional table

To move the multifunctional table pull

the handle in the front without going

beyond the point of resistance. Slide

the multifunctional table forwards or

backwards. Release the handle when

it is in the desired position. Make sure

that the multifunctional table is

The front centre passenger seat

backrest can contain a document

tray.

Fold down the tray. The document

tray contains a storage compartment

and a swivelling shelf.

The multifunctional table can be

positioned in second or third row.

securely engaged.

Return the swivelling shelf to its

original position before raising the

tray.

88

Storage

Storage compartment in the

multifunctional table

Unfolding

On the two sides there are tables

located. Pull the table fully up and

then move it into the horizontal

position.

Each table can bear a maximum load

of 10 kg.

To unfold the multifunctional table pull

the handle on the top. Pull the rear

part to the vertical position until it

engages.

Press the cover to open the storage

compartment.

The maximum permitted load is 3 kg.

Caution

To avoid damaging the table tops

never unfold the table when it is

between individual seats.

Storage

89

Folding

Removing

Refitting

To staw the table use the handle to

move it back in the folded position.

To fold the multifunctional table pull

the handle and move the rear part

downwards until it engages.

To remove the multifunctional table

pull the handle in the front beyond the

point of resistance. Remove the

multifunctional table.

The multifunctional table can be fitted

in two positions.

90

Storage

The handle in the front has to be in the

tightened position. Place the rear of

the multifunctional table on the rail

and tip the front down. Slide the

The number and location of the

mounting points may vary depending

on the vehicle:

Roof rack system

Roof rack

Vehicles with glass panel

For safety reasons and to avoid

damage to the roof, the vehicle

approved roof rack system is

recommended. For further

multifunctional table until it engages.

9 Warning

information contact your workshop.

Never use the multifunctional table

in the unfolded position while the

vehicle is in motion. Any objects

on the table will turn into

projectiles in the event of a sudden

stop or collision.

Ensure that the multifunctional

table is correctly folded before

moving or removing it.

Never use the tables as seats or

lean on them.

Follow the installation instructions

and remove the roof rack when not in

use.

The roof load is the combined weight

of the roof rack and the load.

Loading information 3 91.

Mounting

Mount two roof bars using the

mounting points marked in the

picture.

Permissible roof load L1, L2, L3 max.

100 kg.

Check that there is no object

obstructing the rail and preventing

locking.

Fasten the roof rack according to the

installation instructions delivered with

the roof rack.

Storage

91

Vehicles without glass panel

Loading information

Mount the roof rack using the

mounting points marked in the

picture.

Permissible roof load L1 max.

140 kg.

Permissible roof load L2, L3 max.

170 kg.

Vehicle dimensions 3 292

Mount three roof bars using the

mounting points marked in the

picture.

Permissible roof load L1, L2, L3 max.

150 kg.

●

Heavy objects in the load

compartment should be placed

against the seat backrests. Make

sure that the backrests are

securely engaged. If objects can

be stacked, heavier objects

should be placed at the bottom.

●

Prevent sliding of loose objects

by securing them with straps

attached to the lashing eyes.

Lashing eyes 3 82.

Do not allow the load to protrude

above the upper edge of the

backrests.

92

Storage

●

Do not place any objects on the

rear luggage cover or the

instrument panel, and do not

cover the sensor on top of the

instrument panel.

The load must not obstruct the

operation of the pedals, parking

brake and gear selector, or

hinder the freedom of movement

of the driver. Do not place any

unsecured objects in the interior.

To calculate the payload, enter

the data for your vehicle in the

weights table at the front of this

manual.

The EC kerb weight includes

weights for the driver (68 kg),

luggage (7 kg) and all fluids (fuel

tank 90% full).

Optional equipment and

accessories increase the kerb

weight.

Driving with a roof load increases

the sensitivity of the vehicle to

cross-winds and has a

detrimental effect on vehicle

handling due to the vehicle's

higher centre of gravity.

●

Do not drive with an open load

compartment.

●

9 Warning

Always make sure that the load in

the vehicle is securely stowed.

Otherwise objects can be thrown

around inside the vehicle and

cause personal injury or damage

to the load or car.

Distribute the load evenly and

secure it properly with retaining

straps. Adjust the tyre pressure

and vehicle speed according to

the load conditions. Check and

retighten the straps frequently.

●

The payload is the difference

between the permitted gross

vehicle weight (see identification

plate) and the EC kerb weight.

Do not drive faster than 75 mph.

Identification plate 3 286.

Storage for Your Vauxhall Vivaro Van Third Generation (2019-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals