Storage -> Additional storage features for Your Vauxhall Vivaro Van Third Generation (2019-2026)

86  
Storage  
Safety net on the floor  
Additional storage  
features  
Folding tray  
It is possible to install the safety  
net together with folded seats.  
Attached to the lashing eyes on the  
rear floor, it allows objects to be held  
down.  
Folded seats 3 52.  
2. Tension both straps by pulling at  
the loose end.  
Lashing eyes 3 82.  
Trays may be located on the  
backrests of the front seats.  
Fold down the tray. The tray contains  
a cupholder and a strap to secure  
objects.  
Do not place any hard or heavy  
objects on the tray.  
Storage  
87  
Document tray in the centre  
seatback  
Table  
Multifunctional table  
To move the multifunctional table pull  
the handle in the front without going  
beyond the point of resistance. Slide  
the multifunctional table forwards or  
backwards. Release the handle when  
it is in the desired position. Make sure  
that the multifunctional table is  
The front centre passenger seat  
backrest can contain a document  
tray.  
Fold down the tray. The document  
tray contains a storage compartment  
and a swivelling shelf.  
The multifunctional table can be  
positioned in second or third row.  
securely engaged.  
Return the swivelling shelf to its  
original position before raising the  
tray.  
88  
Storage  
Storage compartment in the  
multifunctional table  
Unfolding  
On the two sides there are tables  
located. Pull the table fully up and  
then move it into the horizontal  
position.  
Each table can bear a maximum load  
of 10 kg.  
To unfold the multifunctional table pull  
the handle on the top. Pull the rear  
part to the vertical position until it  
engages.  
Press the cover to open the storage  
compartment.  
The maximum permitted load is 3 kg.  
Caution  
To avoid damaging the table tops  
never unfold the table when it is  
between individual seats.  
Storage  
89  
Folding  
Removing  
Refitting  
To staw the table use the handle to  
move it back in the folded position.  
To fold the multifunctional table pull  
the handle and move the rear part  
downwards until it engages.  
To remove the multifunctional table  
pull the handle in the front beyond the  
point of resistance. Remove the  
multifunctional table.  
The multifunctional table can be fitted  
in two positions.