11.1.1. Activating car wash mode
You can get your car ready to go into an automatic car wash by activating car wash mode in the display.
Instead of preparing the car to be washed in an automatic car wash yourself, you can activate car wash mode. It ensures that
your car is ready to be washed and that certain capabilities, such as the rain sensor, remain deactivated while you wash the car.
Press the car symbol
in the bottom bar and go to Settings.
1
Go to Controls → Car modes → Car wash mode.
2
3
Activate car wash mode.
Deactivate car wash mode before you start driving again.
Note
Car wash mode will deactivate automatically when the car starts to pick up speed. However, to ensure that all car features
are available to you, it's recommended to deactivate car wash mode before you reach a public road.
11.1.2. Activating tow mode
If your car needs to be towed onto a flatbed recovery vehicle, you first need to activate tow mode in settings.
Important
Having your car towed without activating tow mode may damage it. Be sure to follow the instructions in the display
until you have received confirmation that tow mode is active before your car is towed.
To avoid accidentally triggering the alarm, reduce your car's alarm sensitivity before towing it.
Tow mode can only be accessed if the car has power. If the car can't be powered on it will need a full recovery.
Be sure to read all information about having your car towed before you activate tow mode.
Note
Tow mode is only used when having your car towed. Do not activate it when towing other vehicles or trailers.
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
283 / 396
English 
