2025-2026 Volvo EX40 SUV Specifications User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Specifications for Your Volvo EX40 SUV First Generation (2025-2026)

15. Specifications  
These specifications describe your car in technical terms and figures. You might need to find some of these  
details, such as when buying new tyres.  
This information is divided up in the following manner, with some examples of their content to help guide you.  
General car characteristics – dimensions, weights and type designations.  
Powertrain specifications – performance, electric motor, range and electric consumption.  
Wheel and tyre specifications – approved tyre pressures and tyre sizes.  
Fluid specifications – brake fluid and air conditioning coolant.  
Certificates and type approvals  
15.1. General car characteristics  
These are the basic facts about your car. This data helps you determine your car's specific set-up.  
You may need to know these things about your car for a number of reasons. For example, to be able to order the correct spare  
parts or accessories.  
15.1.1. Car dimensions  
Here you can find your car's measurements, such as length and height.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
401 / 444  
Locate the measurement you're looking for in the images first, then check the corresponding letter in the table below.  
Measurement  
Load length, floor, folded seat  
Load length, floor  
Wheelbase  
Millimetres  
1670  
Inches  
65.7  
A
B
C
D
E
F
G
H
I
887  
34.9  
106.4  
174.8  
64.8  
28.9  
2702  
4440  
1647  
Length  
Height[1]  
Load height  
733  
Ground clearance[1]  
175  
6.9  
Width including folded-out wing mirrors  
Width including folded-in wing mirrors  
Front track  
2034  
80.1  
1938  
76.3  
J
1598–1601[2]  
62.9–63.0[2]  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
402 / 444  
Measurement  
Rear track  
Millimetres  
1603–1608[2]  
1059  
Inches  
K
L
63.1–63.3[2]  
41.7  
Load width, floor  
Width  
M
1873 (1863[3]  
)
73.7 (73.3[3]  
)
[1]  
At kerb weight plus one person.  
Depending on rim size.  
Body width.  
[2]  
[3]  
15.1.2. Weights  
Your car's maximum gross vehicle weight can be read on a label in the car.  
Weight terminology  
Weight of the car, including the driver, all oils, fluids and standard equipment. This does not include passengers, cargo, optional equipment or  
towball load when there is a trailer connected.  
Kerb weight  
Gross vehicle weight - Kerb weight  
Kerb weight + cargo + passengers  
Permitted maximum load  
Maximum gross vehicle  
weight  
The documented kerb weight applies to cars in the standard version, such as a car without extra equipment or accessories. This  
means that for every accessory added, the loading capacity of the car is reduced correspondingly by the weight of the  
accessory.  
Weighing the car is a sure way to determine the kerb weight of your own particular car.  
Warning  
The car's driving characteristics change depending on how heavily it is loaded and how the load is distributed.  
Label weights  
1
2
3
4
The label is located on the right-hand door pillar and will be visible when the door is opened.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
403 / 444  
1
2
3
4
Maximum gross vehicle weight  
Maximum train weight (car+trailer)  
Maximum front axle load  
Maximum rear axle load  
Maximum load  
See your car's registration document.  
75 kg  
Maximum load  
Maximum roof load  
15.1.3. Towing specifications and capabilities  
Towing weights and towball loads for driving with a trailer can be viewed below.  
Important  
Always follow local rules and regulations when driving with a trailer, such as speed for the vehicle combination.  
Note  
Use of stabiliser coupling on the towbar is recommended for trailers heavier than 1800 kg.  
Braked trailer  
1500 kg  
100 kg  
Max. trailer weight  
Max. towball load  
Unbraked trailer  
750 kg  
Max. trailer weight  
15.1.4. Towbar specifications  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
404 / 444  
Here you can find measurements related to your towbar.  
Dimensions, mounting points in mm (inches)  
939 (37)  
A
B
C
D
E
F
G
H
I
72 (2.8)  
6 (0.24)  
145 (5.7)  
88 (3.5)  
Side beam has 8-degree angle.  
353 (13.9)  
1048 (41.3)  
524 (20.6)  
15.1.5. Type designations  
Knowing the car's detailed information can help facilitate contact with a Volvo dealer and when ordering spare  
parts and accessories.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
405 / 444  
Labels  
1
Label location  
1
Product label  
The product label is located on the right-hand door pillar and will be visible when the door is opened.  
Product label  
Examples of information you can find on the product label:  
Type approval number  
Vehicle identification number  
Weight information  
Code designation for exterior colour  
Note  
Labels depicted in this manual are generic representations of those found around your car. The manual only contains  
their location and what kind of information they hold. Find the actual label for specific information about your car.  
Tip  
For many markets, more information can also be found in the car's registration document.  
15.2. Powertrain specifications  
Find the specifications regarding your car's propulsion.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
406 / 444  
These specifications provide details about what your car is capable of and certified for. They also specify data on relevant char-  
ging cables.  
15.2.1. Electric motor specifications  
The Single Motor is powered by one electric motor (rear) and you can find the specifications here.  
Single Motor Extended range  
Rear  
Electric motor type  
Electric motor model  
Max. power output  
Synchronous motor with permanent magnet  
Total car (system)  
CCJDG  
185  
kW  
hp  
252  
N/A  
Rated power (continuous power)  
Max. torque  
kW  
Nm  
lb-ft  
420  
310  
Note  
If data is missing it will be updated at a later stage.  
15.2.2. The car's certified values for range and electricity  
consumption  
These are the certified values for your car's range and use of electrical power. However, range and electricity  
consumption vary according to the circumstances and driving conditions. These values should not be  
interpreted as an expected range but should primarily be used to compare different cars.  
Procedure used to establish the values  
The values in the table below are established in accordance with WLTP[1], which is an international test method performed in a  
laboratory environment. The method uses drive cycles to simulate an average driving run of the car. Every drive cycle is determ-  
ined by different conditions such as speed, time and mileage.  
The standard is based on four drive cycle profiles with different average speeds:  
Low speed  
Urban driving  
Medium speed  
High speed  
Suburban driving  
Extra-urban driving  
Motorway driving  
Extra high speed  
Symbol explanation  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
407 / 444  
This is an explanation of the symbols used in the specification table below.  
Certified value for the car's potential range (km)[2]  
Urban and suburban driving.  
.
Average value over all four drive cycle phases (urban, suburban, extra-urban and motorway driving).  
Certified value for the car's electricity consumption (kWh/100 km). The value is an average over all four drive cycle phases (urban, suburban, extra-urban and  
motorway driving).  
Low value.  
High value.  
Specifications for range and electricity consumption  
Single Motor Extended Range  
764  
702  
552  
498  
16.6  
18.3  
Note  
If data is missing in the table, it will be updated at a later date.  
Certified values and actual values  
When driving, the car's range and electricity consumption can differ from the certified value indications. Some reasons for this  
may be:  
Driving style.  
Extra equipment and cargo affect the car's weight or air resistance.  
Non-standard wheels can increase rolling resistance and air resistance.  
High speed causes increased air resistance.  
Road, traffic and weather conditions.  
The general condition of the car.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
408 / 444  
[1]  
[2]  
Worldwide Harmonised Light-Duty Vehicles Test Procedure  
The value should not be interpreted as an expected range. The range is difficult to achieve during normal driving.  
15.2.3. Charging cable specifications  
These specifications provide details about mode 2 charging cables. Mode 2 charging cables can be  
purchased from the Volvo Extras shop.  
-32 °C to 50 °C (-25 °F to 122 °F)  
Ambient temperature  
Residual-current device  
Mode 2 charging cables have a built-in residual-current device that protects the car and the user from electric shocks caused by  
system faults.  
Warning  
The residual-current device helps to protect the car's charging system, but there is no guarantee that an overload never  
occurs.  
Important  
The residual-current device does not protect the household socket.  
Temperature monitoring  
The mode 2 cable is also equipped with a control unit, which has a built-in overtemperature monitoring function. This monitors  
the temperature of both the cable and the household socket.  
Warning  
The charging cable's temperature monitoring helps to protect the car's charging system, but there is no guarantee that  
overheating will never occur.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
409 / 444  
Important  
If temperature monitoring has automatically reduced the charging current on repeated occasions and charging has  
been interrupted, the cause of overheating must be investigated and corrected.  
Avoid exposing the control unit and its plug connector to direct sunlight. The overheating protection in the plug  
connector may otherwise reduce or stop the charging of your car.  
If charging is unintentionally stopped, both the charging cable and the car’s charging system should be checked by a  
trained and qualified Volvo service technician. The household socket should also be checked by a licensed electrician.  
15.2.4. Charging port labels and identifiers  
Your car has a label with an identifier on it that provides information about charging compatibility.  
Charging compatibility identification  
You can find out if your car and the charging point are compatible by looking at the identification labels. The labels are given in  
accordance with the EN 17186 standard. The identification labels include a letter or letters. If a letter on the charging point  
matches a letter on your car's identification label, it means that they are compatible.  
The identification label is located on the inside of the charging lid.  
Charging compatibility identification label.  
The letters indicate the types of charging point your car is compatible with. Your car has three letters defining compatibility.  
Details can be found in the EN 17186 standard.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
410 / 444  
Identification label Charging type  
AC[1] charging type 2  
DC[2] charging (including Combined Charging System (CCS) Combo 2)  
C
K and L  
[1]  
Alternating current  
[2]  
Direct current  
15.3. Wheel and tyre specifications  
Here you can find specific data for wheels and tyres applicable to your car.  
Note  
There are more recommendations regarding wheels and tyres that are important to be aware of.  
15.3.1. Approved tyre pressure  
You can find the approved tyre pressures for your car in the table below.  
The recommended pressure for approved tyres can be found on the tyre pressure label. It's located on the door pillar on the  
driver's side and is visible when the door is opened.  
Tyre size  
Speed  
Load 1-3 persons  
Max load  
ECO pressure  
Front  
Rear  
Front  
Rear  
Front/rear  
kPa (psi)  
kPa (psi)  
kPa (psi)  
kPa (psi)  
kPa (psi)  
235/50 R19  
255/45 R19  
235/45 R20  
255/40 R20  
0-180 km/h (0-112 mph)  
280 (41)  
420 (60)  
280 (41)  
280 (41)  
420 (60)  
280 (41)  
280 (41)  
420 (60)  
Temporary Spare Tyre  
max 80 km/h (max 50 mph)  
420 (60)  
420 (60)  
Important  
Never switch the front and rear wheels around.  
15.3.2. Approved wheel and tyre sizes  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
411 / 444  
In some countries, approved sizes are not indicated by the car's registration documents. However, you can  
find all approved combinations of wheel rims and tyres below.  
Front  
Tyre  
Wheel rim  
7.5x19x50.5  
8x20x50.5  
235/50 R19  
235/45 R20  
Rear  
Tyre  
Wheel rim  
8.5x19x56  
9x20x58.5  
255/45 R19  
255/40 R20  
Important  
Never switch the front and rear wheels around.  
15.3.3. Minimum permitted load index and speed rating for  
tyres  
All tyres have specific speed and load limitations. Tyres must have a speed rating and load index that are  
equal to or higher than your car's maximum speed.  
Your tyre's specification must be at least equal to or greater than:  
100  
H
Minimum permitted load index (LI)  
Minimum permitted speed rating (SS)  
Warning  
If a tyre with a speed rating that is too low is used, it may overheat and become damaged.  
Note  
Winter tyres  
Winter tyres[1] are allowed to have a lower speed rating than your car's top speed. However, if your winter tyres do have a  
lower speed rating than your car's top speed, you are not allowed to drive faster than the tyres' speed rating.  
[1]  
Both studded and stud-free tyres.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
412 / 444  
15.4. Fluid specifications  
Your car has fluids to help different systems function properly. When it is time to refill or perform  
maintenance, you may need to know the specific data for them.  
For some fluids, it is recommended that they are changed or filled by an authorised Volvo workshop. Check this section for the  
fluid you need information on and, if necessary, contact an authorised Volvo workshop to schedule an appointment.  
15.4.1. Brake fluid specifications  
The medium in your car's brake system is called brake fluid.  
Volvo Original or equivalent brake fluid that fulfils a combination of the Dot 4, 5.1 and ISO 4925 class 6 classifications.  
Prescribed grade  
Important  
It is recommended that brake fluid is changed or filled by an authorised Volvo workshop.  
15.4.2. Climate system specifications  
Here you find the information about the refrigerant quantity and the prescribed quality and volume for  
compressor oil.  
Climate system label  
The label with information on climate system fluids is located on the underside of the bonnet.  
On this label you can find:  
Refrigerant type  
Refrigerant quantity  
Label symbols  
Caution  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
413 / 444  
A trained and certified technician is required to service the mobile air conditioning system[1]  
Flammable refrigerants  
Mobile air conditioning system[1]  
Lubricant type  
Compressor oil  
260 ml (8.79 US fl oz) (9.15 UK fl oz)  
Volume  
POE V68  
Prescribed grade  
Servicing and repair of the climate system  
Warning  
Servicing and repair  
The climate system contains pressurised refrigerant. The climate system must only be serviced and repaired by trained  
and certified technicians in order to ensure the safety of the system[2]. Volvo recommends an authorised Volvo workshop  
for any repair or service needs.  
Important  
Repairing the evaporator  
The climate system's evaporator must never be repaired or replaced with a previously used evaporator. A new evaporator  
must be certified and labelled in accordance with SAE J2842.  
[1]  
MAC  
[2]  
In accordance with SAE J2845 (Technician Training for Safe Service and Containment of Refrigerants Used in Mobile A/C  
System).  
15.5. Certificates and type approvals  
This documentation shows that your car meets certain standards and specifications.  
User manuals are required by law to provide documentation of certain certificates and type approvals.  
For more information, contact Volvo support.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
414 / 444  
15.5.1. Type approvals for radar  
Find the radar type approval you're looking for among the ones listed here.  
Front centre radar  
Regions  
Labels and symbols  
Specification  
Botswana  
BOCRA/TA2019/4981  
Brazil  
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência  
em sistemas devidamente autorizados.  
Canada  
IC: 8436B-77V12FLR  
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and  
Economic Development Canada’s license exempt RSS(s). Operation is subject to the following two conditions:  
(1) This device may not cause interference.  
(2) This device must accept any interference, including interference that may cause undesired operation of the  
device.  
L’emetteur/recepteur exempt de licence contenu dans le present appareil est conforme aux CNR d’Innovation,  
Sciences et Developpement economique Canada applicables aux appareils radio exempts de licence.  
L’exploitation est autorisee aux deux conditions suivantes :  
1) L’appareil ne doit pas produire de brouillage;  
2) L’appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en com-  
promettre le fonctionnement.  
European  
Union &  
EFTA  
Hereby, Veoneer US, Inc. declares that the radio equipment type 77V12FLR is in compliance with Directive  
2014/53/EU.  
Operational frequency band: 76-77 GHz  
Maximum Output Power:<55dBm EIRP  
The full text of the EU declaration of conformity is available at the following internet address:  
https://www.veoneer.com/en/regulatory  
Manufacturer: Veoneer US, Inc. 26360 American Drive Southfield, MI 48034 USA Phone: +1-248-223-  
0600  
Ghana  
NCA Approved: ZRO-1H-7E3-145  
Indonesia  
Certificate number: 110700/DJID/2025  
13809  
Dilarang melakukan perubahan spesifikasi  
yang dapat menimbulkan gangguan fisik  
dan/atau elektromagnetik terhadap  
lingkungan sekitarnya  
Israel  
51-8359  
ת
החלפ
 ,
תוכנה
 
שינויי
 
זה
 
ובכלל
 ,
המכשיר
 
של
 
האלחוטיות
 
תכונותיו
 
את
 
לשנות
 
כדי
 
בהן
 
שיש
 
במכשיר
 
פעולות
 
לבצע
 
איסור
 
חל
 
ת
להפרעו
 
החשש
 
בשל
 ,
התקשורת
 
משרד
 
אישור
 
קבלת
 
בלא
 ,
חיצונית
 
לאנטנה
 
לחיבור
 
אפשרות
 
הוספת
 
או
 
מקורית
 
אנטנה
 
ת
אלחוטיו
.  
Japan  
Malaysia  
This device is granted pursuant to the Japanese Radio Law under the grant ID n° : R 215-JRA003 This device  
should not be modified (otherwise the granted designation number will become invalid).  
: R  
215-JRA003  
HIDF15000171  
Model: 77V12FLR  
Brand: Veoneer US, Inc.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
415 / 444  
Regions  
Labels and symbols  
Specification  
Mexico  
IFT: RLVVE7719-1064  
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dis-  
positivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia,  
incluyendo la que pueda causar su operación no deseada.  
Moldova  
Morocco  
AGREE PAR L'ANRT MAROC  
Numéro d´agrément: MR_20098_ANRT_2019  
Date d´agrément: 2019_06_14  
Nigeria  
Oman  
Connection and use of this communications equipment is permitted by the Nigerian Communications  
Commission.  
Registered No: R/7713/19  
Dealer No: D172338  
Paraguay  
Serbia  
NR: 2019-07-I-0397  
И011 19  
Singapore  
South Africa  
South Korea  
Taiwan  
DA 106706  
TA-2019/1378APPROVED  
R-C-1VN-77V12FLR  
CCAI19LP2310T1  
,
,
;
,
,
,
Thailand  
Ukraine  
1)  
. 2)  
UA RF: 1VEON2FLR  
справжнім VEONEER US, INC. заявляє, що тип радіообладнання 77V12FLR відповідає Технічному  
регламенту радіообладнання; повний текст декларації про відповідність доступний на веб-сайті за такою  
адресою: https://www.veoneer.com/en/regulatory  
United Arab  
Emirates  
REGISTERED No: ER72325/19  
DEALER No: 0020858/10  
United  
Hereby, Veoneer US, Inc. declares that the radio equipment type 77V12FLR is in compliance with radio regula-  
tion 2017.  
Kingdom  
Operational frequency band: 76 – 77 GHz/ Maximum output power:<55 dBm e.i.r.p  
www.veoneer.com/en/regulatory [https://www.veoneer.com/en/regulatory]  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
416 / 444  
Regions  
Labels and symbols  
Specification  
United  
States  
FCC ID: WU877V12FLR  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this  
device may not cause harmful interference, and (2) this device must accept any interference received, includ-  
ing interference that may cause undesired operation.  
CAUTION TO USERS  
Changes or modifications not expressly approved by the party responsible for compliance could void the user`s  
authority to operate the equipment.  
Vietnam  
Zambia  
77V12FLR  
ZMB/ZICTA/TA/2019/6/61  
Rear corner radars  
Regions  
Labels and symbols  
Specification  
Botswana  
BOCRA/TA/2017/3372  
Brazil  
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência  
em sistemas devidamente autorizados.  
Canada  
IC:2694A-RS4  
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and  
Economic Development Canada’s license exempt RSS(s). Operation is subject to the following two conditions:  
(1) This device may not cause interference.  
(2) This device must accept any interference, including interference that may cause undesired operation of the  
device.  
L’emetteur/recepteur exempt de licence contenu dans le present appareil est conforme aux CNR d’Innovation,  
Sciences et Developpement economique Canada applicables aux appareils radio exempts de licence.  
L’exploitation est autorisee aux deux conditions suivantes :  
1) L’appareil ne doit pas produire de brouillage;  
2) L’appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en com-  
promettre le fonctionnement.  
China  
RS4  
H
24.05-  
24.25GHz  
: 20mW  
European  
Union &  
EFTA  
Hereby, Hella KgaA Hueck & Co. Declares that the radio equipment type RS4 is in compliance with Directive  
2014/53/EU.  
The full text of the EU declaration of conformity is available at the following internet address:  
www.hella.com/vcc.  
Technical information: Frequency range: 24.05 ... 24.25 GHz Transmission power: 20 dBm (maximum) EIRP  
Manufacturer and Address: Manufacturer: Hella KGaA Hueck & Co. Address: Rixbecker Straße 75, 59552  
Lippstadt, Germany  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
417 / 444  
Regions  
Ghana  
Labels and symbols  
Specification  
NCA Approved: 1R3-1M-7E1-0B7  
Indonesia  
For products manufactured in Germany:  
Certificate number: 108988/DJID/2025  
13809  
Dilarang melakukan perubahan spesifikasi  
yang dapat menimbulkan gangguan fisik  
dan/atau elektromagnetik terhadap  
lingkungan sekitarnya  
For products manufactured in China:  
Certificate number: 111350/DJID/2025  
13809  
For products manufactured in  
Germany:  
For products manufactured in China:  
Israel  
51-8359  
ו
תכונותי
 
את
 
לשנות
 
כדי
 
בהן
 
שיש
 
במכשיר
 
פעולות
 
לבצע
 
איסור
 
חל
 :
התקשורת
 
משרד
 
מטעם
 
התאמה
 
אישור
 
מספר
 
א
בל
 ,
חיצונית
 
לאנטנה
 
לחיבור
 
אפשרות
 
הוספת
 
או
 
מקורית
 
אנטנה
 
החלפת
 ,
תוכנה
 
שינויי
 
זה
 
ובכלל
 ,
המכשיר
 
של
 
האלחוטיות
 
ת
אלחוטיו
 
להפרעות
 
החשש
 
בשל
 ,
התקשורת
 
משרד
 
אישור
 
קבלת
.  
Japan  
This device is granted pursuant to the Japanese Radio Law under the grant ID n° : R 204-750001 This device  
should not be modified (otherwise the granted designation number will become invalid).  
: R  
204-750001  
Malaysia  
Mexico  
CID F 15000578  
Radar de corto alcance  
RS4  
Hella KGaA Hueck & Co  
IFETEL: RLVHERS17-0286  
La operación de este equipo esta sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dis-  
positivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia,  
incluyendo la que pueda causar su operación no deseada.  
Moldova  
Morocco  
AGREE PAR L'ANRT MAROC  
Numéro d´agrément: MR_20098_ANRT_2019  
Date d´agrément: 2019_06_14  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
418 / 444  
Regions  
Labels and symbols  
Specification  
Nigeria  
Connection and use of this communications equipment is permitted by the Nigerian Communications  
Commission.  
Oman  
Registered No: R/3957/17  
Dealer No: D080134  
Serbia  
И011 17  
Singapore  
South Africa  
South Korea  
Taiwan  
DA 103238  
TA-2016/3407APPROVED  
R-CMM-HLA-RS4  
(A  
)
,
CCAB17LP0470T5  
,
,
;
,
,
,
Thailand  
Ukraine  
1)  
. 2)  
Цим HELLA GmbH & Co. KGaA заявляє, що радіотехнічне обладнання типу RS4 відповідає Технічному  
регламенту радіотехнічного обладнання та Директиві 2014/53/ЄС. Повний текст декларації про  
відповідність доступний за адресою: www.hella.com/vcc  
Частотний діапазон: 24,05 – 24,25 ГГц  
Потужність передачі: 20 дБм (макс.) EIRP  
United Arab  
Emirates  
Registered No: ER53878/17  
Dealer No: DA44932/15  
United  
Hereby, Hella GmbH & Co. KGaA declares that the radio equipment type RS4 is in compliance with Radio  
Equipment Regulations of the United Kingdom.  
The full text of the United Kingdom declaration of conformity is available at the following internet address:www.  
hella.com/vcc [https://www.hella.com/vcc]  
Kingdom  
Technical information:  
Frequency band: 24.05 ... 24.25 GHz  
Transmission power: 20 dBm (max.) EIRP  
Manufacturer and Address:  
Hella GmbH & Co. KGaA  
Rixbecker Straße 75, 59552 Lippstadt, Germany  
United  
States  
FCC ID: NBG01RS4  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this  
device may not cause harmful interference, and (2) this device must accept any interference received, includ-  
ing interference that may cause undesired operation.  
CAUTION TO USERS  
Changes or modifications not expressly approved by the party responsible for compliance could void the user`s  
authority to operate the equipment.  
Vietnam  
C0173191017AF04A2  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
419 / 444  
Regions  
Labels and symbols  
Specification  
Zambia  
ZMB/ZICTA/TA/2017/6/7  
15.5.2. Type approvals for radio equipment  
Find the radio equipment type approvals you're looking for amongst the ones listed here.  
Region  
Labels and symbols  
Specification  
European Union  
& EFTA  
Hereby, Volvo Cars declares that all radio equipment is in compliance with Directive 2014/53/EU.  
Japan  
R 204-750001  
This device is granted pursuant to the Japanese Radio Law and the Japanese Telecommunications Business Law. This  
device should not be modified (otherwise the granted designation number will become invalid).  
15.5.3. Type approvals for wireless charger and NFC  
What follows are the technical specifications and certificates for the wireless charger.  
Declaration of conformity  
Argentina  
Brazil  
05588-23-12116  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
420 / 444  
Canada  
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-ex-  
empt RSS(s).  
1. This device may not cause interference; and  
2. This device must accept any interference, including interference that may cause undesired operation of the device.  
This equipment complies with radio frequency exposure limits set forth by the Innovation, Science and Economic Development Canada for an uncon-  
trolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders.  
This device must not be co-located or operating in conjunction with any other antenna or transmitter.  
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique  
Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:  
1. L'appareil ne doit pas produire de brouillage;  
2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.  
Cet équipement est conforme aux limites d'exposition aux radiofréquences définies par la Innovation, Sciences et Développement économique Canada  
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre le dispositif et l'utilisateur  
ou des tiers. Ce dispositif ne doit pas être utilisé à proximité d'une autre antenne ou d'un autre émetteur.  
Indonesia  
Israel  
Philippines  
Taiwan  
ESD-RCE-2231876  
NCC  
/ NCC statement:  
Thailand  
.
.
.
United Arab  
Emirates  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
421 / 444  
United  
States  
FCC Statement:  
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received, including interference that may cause undesired operation.  
Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the  
equipment.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de-  
signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre-  
quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there  
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-  
tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follow-  
ing measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment.  
This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders.  
This device must not be co-located or operating in conjunction with any other antenna or transmitter.  
Vietnam  
Zambia  
15.5.4. Type approval for on-board diagnostics port  
Here you can find the type approval for the on-board diagnostics port.  
Region  
Specification  
Canada  
IC: 20839-ACUII06  
This unit corresponds with Industry Canada licensed RSS-standards. Use is permitted under the following two conditions: (1) This unit must not cause  
Interference and (2) this unit must be able to withstand any received Interference, including interference that can cause unwanted functions.  
United States of FCC ID: 2AGKKACUII-06  
America This unit corresponds with section 15 of the FCC regulations. Use is permitted under the following two conditions: (1) This unit must not cause danger-  
ous Interference and (2) this unit must be able to withstand any received Interference, including interference that can cause unwanted functions.  
15.5.5. Type approval for anti-theft systems  
The following information contains type approvals for the anti-theft systems.  
Alarm system  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
422 / 444  
Country  
Specification  
Canada  
Canada IC: 4405A-DA 5823(3)  
This device is subject to the following conditions:  
1. This device may not cause harmful interference, and  
2. this device must accept any interference received, including interference that may cause undesired operation.  
United States  
USA FCC ID: MAYDA 5823(3)  
This device complies with part 15 of the FCC rules.  
Operation is subject to the following conditions:  
1. This device may not cause harmful interference, and  
2. this device must accept any interference received, including interference that may cause undesired operation.  
Immobiliser and Passive Entry/Passive Start systems  
Country  
Specification  
Canada  
Canada-IC: 3659A-VO3134  
This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions:  
Operation is subject to the following two conditions:  
1. This device may not cause harmful interference, and  
2. this device must accept any interference received, including interference that may cause undesired operation.  
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.  
L'exploitation est autorisée aux deux conditions suivantes:  
1. l'appareil ne doit pas produire de brouillage, et  
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, mêmesi le brouillage est susceptible d'en compromettre le  
fonctionnement.  
United  
States  
USA-FCC ID: LTQVO3134  
This device complies with part 15 of the FCC rules.  
Operation is subject to the following two conditions:  
1. This device may not cause harmful interference, and  
2. this device must accept any interference received, including interference that may cause undesired operation.  
Any changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.  
15.5.6. Key systems certification  
Here you can find standards compliance certifications for the keys.  
CEM marking for the remote control key system. For supplementary type approval numbers, see the following tables.  
Lock system keyless start (Passive Start) and keyless locking/unlocking  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
423 / 444  
Country/Region  
Compliance  
Label  
Argentina  
H-25867  
Brazil  
MT-3245/2015  
MT-3245/2015  
Canada  
Volvo Standard Key IC: 4008C-HUF8423MS  
Volvo Tag ID IC: 4008C-HUF8432MS  
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s).  
Operation is subject to the following two conditions:  
1. This device may not cause harmful interference, and  
2. this device must accept any interference received, including interference that may cause undesired operation.  
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.  
L'exploitation est autorisée aux deux conditions suivantes :  
1. l'appareil ne doit pas produire de brouillage, et  
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en  
compromettre le fonctionnement.  
Europe  
Hereby, Delphi Deutschland GmbH, 42367 Wuppertal declares that this VO3-134TRX is in compliance with the essential  
requirements and other relevant provisions of Directive 2014/53/EU (RED).  
The original declaration of conformity can be accessed at the following link www.delphi.com/automotive-homologation [h  
ttps://www.delphi.com/automotive-homologation]  
Indonesia  
Jordan  
Nomor: 38301/SDPPI/2015  
TRC/LPD/2014/250  
Malaysia  
Mexico  
RAAT/37A/1215/S(15-5198)  
IFETEL: RLVDEVO15-0396  
TA-2016-02  
Namibia  
Russia  
Serbia  
P1614120100  
South Africa  
TA-2014-1868  
United Arab  
Emirates  
ER37847/15  
DA0062437/11  
United States  
Volvo Standard Key FCC ID: YGOHUF8423MS  
Volvo Tag ID FCC ID: YGOHUF8432MS  
This device complies with part 15 of the FCC Rules.  
Operation is subject to the following conditions:  
1. This device may not cause harmful interference, and  
2. this device must accept any interference received, including interference that may cause undesired operation.  
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s  
authority to operate the equipment.  
Remote control key  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
424 / 444  
Country/Region  
Compliance  
Label  
Argentina  
H-23694  
Belarus  
Brazil  
Anatel: 06768-19-06643  
Modelo: HUF8423MS  
Este equipomento opera em caráter secundário isto é não tem direito a proteção contra interferência prejudicial,  
mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.  
Europe  
Hereby, Huf Hülsbeck & Fürst GmbH & Co. KG declares that the radio equipment type HUF8432 is in compliance  
with Directive 2014/53/EU.  
The full text of the EU declaration of conformity is available at the following internet address: http:// www.huf-group.c  
om/eudoc.  
Frequency band: 433,92 MHz  
Maximum Transmission Power: 10 mW  
Manufacturer: Huf Hülsbeck & Fürst GmbH & Co. KG  
Steeger Str. 17  
42551 Velbert  
Germany  
Ghana  
NCA Approved: ZRO-M8-7E3-138  
Indonesia  
Sertifikat Nomor: 86806/SDPPI/2022  
PLG ID: 8093  
Customs Union  
Kazakhstan, Russia  
Moldova  
Morocco  
AGREE PAR L'ANRT MAROC  
Numéro d'agrément: MR 20402 ANRT 2019  
Date d'agrément: 10/07/2019  
Nigeria  
Oman  
Connection and use of this communication equipment is permitted by the Nigerian Communications Commission  
Philippines  
Paraguay  
Serbia  
ESD-1919938C  
HUF8423MS  
Singapore  
Complies with IMDA Standards DA103787  
South Africa  
TA-2019/772  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
425 / 444  
Country/Region  
Compliance  
Label  
Taiwan  
1.  
2.  
United Arab Emirates  
Ukraine  
Cправжнім Huf Hülsbeck & Fürst GmbH & Co KG заявляє, що тип радіообладнання відповідає Технічному  
[HUF8423MS] регламенту радіообладнання; повний текст -декларації про відповідність доступний на веб  
сайті за такою адресою: http:// www.huf-group.com/eudoc  
Робоча частота: 433,92 ГГц  
Vietnam  
Zambia  
Key tag  
Country/Region  
Compliance  
Label  
Argentina  
H-23695  
Belarus  
Brazil  
Anatel: 04362-16-06643  
Modelo: HUF8432MS  
Este equipo opera em caráter secundário isto é não tem direito a proteção contra interferência prejudicial, mesmo de  
estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.  
Europe  
Hereby, Huf Hülsbeck & Fürst GmbH & Co. KG declares that the radio equipment type HUF8432MS is in compliance with  
Directive 2014/53/EU.  
The full text of the EU declaration of conformity is available at the following internet address: http:// www.huf-group.com/e  
udoc.  
Frequency band: 433,92 MHz  
Maximum Transmission Power: 10 mW  
Manufacturer: Huf Hülsbeck & Fürst GmbH & Co. KG  
Steeger Str. 17  
42551 Velbert  
Germany  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
426 / 444  
Country/Region  
Ghana  
Compliance  
Label  
NCA Approved: ZRO-M8-7E3-139  
Indonesia  
Sertifikat Nomor: 86808/SDPPI/2022  
PLG ID: 8093  
Philippines  
Moldova  
ESD-1919939C  
Morocco  
AGREE PAR L'ANRT MAROC  
Numéro d'agrément: MR 20403 ANRT 2019  
Date d'agrément: 10/07/2019  
Nigeria  
Oman  
Connection and use of this communications equipment is permitted by the Nigerian Communications Commission  
Paraguay  
South Africa  
Serbia  
HUF8432MS  
TA-2019-773  
Singapore  
Taiwan  
Complies with IMDA Standards  
DA103787  
1.  
2.  
United Arab  
Emirates  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
427 / 444  
Country/Region  
Compliance  
Label  
Ukraine  
Cправжнім Huf Hülsbeck & Fürst GmbH & Co KG заявляє, що тип радіообладнання відповідає Технічному  
[HUF8423MS] регламенту радіообладнання; повний текст -декларації про відповідність доступний на веб сайті за  
такою адресою: http:// www.huf-group.com/eudoc  
Робоча частота: 433,92 ГГц  
Vietnam  
Zambia  
Central Electronic Module  
Country/Region  
Compliance  
Label  
Indonesia  
Sertifikat Nomor: 85998/SDPPI/2022  
PLG ID: 13809  
15.5.7. Candidate List Substance Information (CL) in accord-  
ance with the REACH Regulation, Article 33.1  
Volvo Cars supports the underlying goals of the REACH regulation in general, and Article 33 in particular,  
which are consistent with our own commitment to promote the responsible manufacturing, handling and use  
of our products.  
In accordance with Article 33.1 of the REACH Regulation (Reg. EC 1907/2006),[1] professional customers must be informed  
of Substances of Very High Concern (SVHC[2]) in products supplied by Volvo Cars. The intention is to facilitate the safe hand-  
ling of the constituent components affected in order to protect people and the environment.  
Presence of candidate list substances  
The articles in the "Candidate List Substances Table" below contain substances at greater than 0.1% w/w in the candidate list  
(CL) for the specific car. The information on substances in the candidate list (CL) is based on the data obtained from our suppli-  
ers and our own product data.  
General Safe Use Information for Articles  
Every car from Volvo Cars is provided with a user manual, which includes safe use information for owners, drivers and users of  
the car. Volvo Cars information on the repair and servicing of cars and genuine parts also includes safe use information for ser-  
vice personnel.  
Where present in parts of this car, the Candidate List substances shown in the relevant "Candidate List Substances Table" for  
the specific car are incorporated in such a way that potential exposure to customers as well as risks for people or the environ-  
ment can be minimised as long as the car and its parts are used as intended, and any repairs, servicing and maintenance are  
carried out following technical instructions for those activities, and industry standard good practices.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
428 / 444  
An end-of-life vehicle may only be disposed of legally in the European Union at an Authorised Treatment Facility (ATF). Vehicle  
parts should be disposed in accordance with locally applicable laws and local authority guidance.  
Candidate List Substances Table  
More details are available in a PDF file, see Support / Car information / Regulatory information.  
[1]  
REACH - The European Union's chemicals legislation, which entered into force on 1 June 2007, Regulation (EC) No.  
1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).  
[2]  
SVHC - Substances of Very High Concern, which are included in the current candidate list (CL).  
15.5.8. Driver display licence agreements  
You can find the driver display licence agreements between Volvo and the manufacturer or developer listed  
here.  
The table contains the open source software (OSS) components used within the product under the terms of the respective li-  
cences. The source code corresponding to the open source components is also provided along with the product wherever man-  
dated by the respective OSS licence.  
Table of open source components used  
SI  
Name of OSS  
Version  
of OSS  
compon-  
ent  
Name and version of Website  
licence text  
More information  
num- component  
ber  
1
BidiReferenceCpp 26  
Unicode Terms of  
Use  
http://www.unicode. (C) Socionext Embedded Software Austria GmbH (SESA) Copyright (C) 1999-  
org/Public/PROGRA 2009, ASMUS, Inc  
MS/BidiReferenceC  
pp/  
2
3
4
FASTCRC32  
1.2.8  
License of Stephan  
brumme/ Zlib style  
License  
http://stephan-brum Copyright © 2011-2013 Stephan Brumme. All rights reserved, Copyright (C)  
me.com/  
1995-2006, 2010, 2011, 2012 Mark Adler  
Freescale IMX6  
HDMI  
5.0.11  
BSD 3-clause  
"New" or "Revised"  
License  
https://www.nxp.co  
m/ [https://www.nx  
p.com/]  
Copyright © 2009-2012, Freescale Semiconductor, Inc, Copyright © 2010-  
2012, Freescale Semiconductor, Inc.  
FreeType Hashing 2.6.3  
MIT License  
https://sourceforge. Copyright 2000 Computing Research Labs, New Mexico State University  
net/p/canvasdraw/c Copyright 2001-2015 Francesco Zappa Nardelli  
d/642/tree/trunk/fr  
eetype/include/freet  
ype/internal/fthash.  
h [https://sourceforg  
e.net/p/canvasdra  
w/cd/642/tree/trun  
k/freetype/include/f  
reetype/internal/ftha  
sh.h]  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
429 / 444  
SI  
Name of OSS  
Version  
of OSS  
compon-  
ent  
Name and version of Website  
licence text  
More information  
num- component  
ber  
5
6
7
Freetype Project  
2.6.3  
2.6.3  
2.6.3  
MIT License  
https://sourceforge. Copyright (C) 2001-2014 by Francesco Zappa Nardelli. Copyright 2000  
- BDF  
net/projects/freetyp Computing Research Labs, New Mexico State University  
e/files/freetype2/2.  
6.3/ [https://sourcef  
orge.net/projects/fre  
etype/files/freetype  
2/2.6.3/]  
Freetype Project  
-PCF  
MIT License  
https://sourceforge. Copyright 2000-2001, 2003 by Francesco Zappa Nardelli Copyright (C) 2000,  
net/projects/freetyp 2001, 2002, 2003, 2006, 2010 by Francesco Zappa Nardelli Copyright (C)  
e/files/freetype2/2.  
2000-2004, 2006-2011, 2013, 2014 by Francesco Zappa Nardelli Copyright  
6.3/ [https://sourcef 2000-2010, 2012-2014 by Francesco Zappa Nardelli Copyright 2003 by  
orge.net/projects/fre Francesco Zappa Nardelli  
etype/files/freetype  
2/2.6.3/]  
Freetype Project  
- Pcfutil  
Open Group License https://sourceforge. Copyright 1990, 1994, 1998 The Open Group  
net/projects/freetyp  
e/files/freetype2/2.  
6.3/ [https://sourcef  
orge.net/projects/fre  
etype/files/freetype  
2/2.6.3/]  
8
9
HarfBuzz  
1.3.1  
1.16  
MIT License  
http://freedesktop.o Copyright © 2007 Chris Wilson Copyright © 2009,2010 Red Hat, Inc.  
rg/wiki/Software/H  
Copyright © 2011,2012 Google, Inc.  
arfBuzz  
Integrity Libnet  
Internet Software  
Consortium-IBM  
https://github.com/l Copyright © 1996 by Internet Software Consortium. Consortium, Copyright ©  
attera/glibc/blob/m 1995 by International Business Machines, Inc.  
License ISC License aster/resolv/inet_pt  
on.c [https://github.  
com/lattera/glibc/bl  
ob/master/resolv/in  
et_pton.c]  
10  
11  
Khronos EGL  
Headers  
1.3  
MIT License  
http://www.khronos. Copyright © 2007-2013 The Khronos Group Inc. Copyright 2008 VMware, Inc.  
org/registry/egl/  
Copyright © 2013-2014 The Khronos Group Inc.  
Khronos Group -  
OpenGL ES  
1.4  
SGI Free Software  
License B v2.0  
http://www.khronos.  
org/opengles/  
12  
13  
libjpeg  
6b  
Independent JPEG  
Group License  
http://www.ijg.org/  
Copyright (C) 1991-1998, Thomas G. Lane.  
libpng  
1.4.22  
libpng License  
http://github.com/c  
oapp-packages/libp  
ng/  
Copyright © 1998-2010 Glenn Randers-Pehrson Copyright © 2007, 2009  
Glenn Randers-Pehrson Version 0.96 Copyright © 1996, 1997 Andreas Dilger  
Version 0.88 Copyright © 1995, 1996 Guy Eric Schalnat, Group 42, Inc.  
14  
15  
Libunibreak  
1.2.8  
1.4.0  
zlib License  
https://github.com/  
Copyright (C) 2008-2011 Wu Yongwei Copyright (C) 2012  
adah1972/libunibrea Tom Hacohen  
k [https://github.co  
m/adah1972/libunib  
reak]  
[email protected]  
lz4 Compression  
algorithm  
BSD 2-clause  
http://github.com/C Copyright (C) 2011-2014, Yann Collet  
"Simplified" License yan4973/lz4/  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
430 / 444  
SI  
Name of OSS  
Version  
of OSS  
compon-  
ent  
Name and version of Website  
licence text  
More information  
num- component  
ber  
16  
md5  
1.6  
Public Domain  
https://doxygen.reac  
tos.org/d7/d04/sdk  
_2lib_23rdparty_2f  
reetype_ 2src_2bas  
e_2md5_8c_sourc  
e.html [https://doxyg  
en.reactos.org/d7/d  
04/sdk_2lib_23rdp  
arty_2freetype_ 2sr  
c_2base_2md5_8c  
_source.html]  
17  
NetBSD  
1.9  
BSD-4-Clause  
http://www.netbsd.o Copyright © 1998 Manuel Bouyer Copyright © 1996 Matt Thomas., Copyright  
(University of  
rg/  
1997 Marshall Kirk McKusick. All Rights Reserved, Copyright © 1985, 1988,  
1989, 1991, 1993, 1995 The Regents of the University of California Copyright ©  
1989, 1993 The Regents of the University of California Copyright © 1983, 1993  
The Regents of the University of California Copyright 2000-2011 Green Hills  
Software Copyright (c) 1996 by Internet Software Consortium. Copyright (C)  
1998 WIDE Project, Portions Copyright © 1995 by International Business  
Machines, Inc, Copyright (C) 1994, 1995, 1997 TooLs GmbH Copyright (C)  
1994, 1995, 1997 Wolfgang Solfrank Copyright © 1995, 1999 Berkeley  
Software Design, Inc Portions Copyright © 1993 by Digital Equipment  
Corporation Copyright © 1992 Henry Spencer Copyright © 1997, 1998, 1999  
The NetBSD Foundation, Inc Copyright © 1996 by Internet Software  
Consortium.Copyright (c) 1994 James A. Jegers(c) © UNIX System  
Laboratories, Inc.  
California-Specific),  
BSD3, IBM License,  
HPND like license,  
BSD 2-clause  
"Simplified" License,  
BSD One Clause  
License  
18  
19  
NetBSD_BSD4  
1.9  
BSD 4-clause  
"Original" or "Old"  
License  
http://www.netbsd.o Copyright 2000-2011 Green Hills Software Copyright © 1994, 1998  
rg/  
Christopher G. Demetriou, Copyright © 1982, 1986, 1990, 1993, 1994 The  
Regents of the University of California. All rights reserved. © UNIX System  
Laboratories, Inc.  
The FreeType  
Project  
2.6.3  
Freetype Project  
License  
http://sourceforge.n Copyright 1996-2016 by David Turner, Robert Wilhelm, and Werner Lemberg,  
et/projects/freetyp  
e/  
Copyright 2007-2016 by Rahul Bhalerao, Copyright 2009-2016 by Oran Agra  
and Mickey Gabel, Copyright 2008-2016 by David Turner, Robert Wilhelm,  
Werner Lemberg, and Suzuki Toshiya, Copyright 2000 Computing Research  
Labs, New Mexico State University, Copyright 2001-2015 Francesco Zappa  
Nardelli, Copyright 2004-2016 by Masatake YAMATO and Redhat K.K,  
Copyright 2007-2016 by Derek Clegg and Michael Toftdal, Copyright 2010-  
2016 by Joel Klinghed, Copyright 2007-2013 Adobe Systems Incorporated,  
Copyright 2007-2014 Adobe Systems Incorporated, Copyright 2004-2016 by  
Albert Chin-A-Young, Copyright 2013-2016 by Google, Inc, Copyright 2002-  
2016 by Roberto Alameda, Copyright 2003 Huw D M Davies for Codeweavers,  
Copyright 2007 Dmitry Timoshkov for Codeweavers  
- freetype2  
20  
Vivante Driver  
software  
viv5.0.11  
p7.4.i3  
MIT License  
http://www.vivantec Copyright 2012 - 2016 Vivante Corporation, Santa Clara, California Copyright ©  
orp.com/  
2007 The Khronos Group Inc Copyright © 2014 - 2016 Vivante Corporation  
Copyright 2012 Vivante Corporation, Sunnyvale, California Copyright © 2011  
Intel Corporation Copyright (C) 1999-2001 Brian Paul  
21  
zlib  
1.2.8  
3.4.2  
zlib License  
http://www.zlib.net/  
Copyright (C) 1995-2007 Mark Adler Copyright (C) 1995-2005 Jean-loup  
Gailly Copyright (C) 1995-2012 Mark Adler Copyright (C) 2003 Chris Anderson  
Copyright (C) 1998 Brian Raiter  
22  
RBTree.cpp  
Public Domain  
https://www.eu.soci (C) Socionext Embedded Software Austria GmbH (SESA)  
onext.com/ [https://  
www.eu.socionext.co  
m/]  
Licence text  
Licence name  
Licence text  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
431 / 444  
Licence name  
Licence text  
HPND Like  
license  
Portions Copyright (c) 1993 by Digital Equipment Corporation.  
Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright  
notice and this permission notice appear in all copies, and that the name of Digital Equipment Corporation not be used in advertising or publicity per-  
taining to distribution of the document or software without specific, written prior permission.  
THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS  
SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL DIGITAL EQUIPMENT  
CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER  
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS  
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.  
BSD 2-clause  
"Simplified"  
License  
BSD Two Clause License  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form  
must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided  
with the distribution.  
THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED  
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT  
SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES  
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR  
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR  
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF  
THE POSSIBILITY OF SUCH DAMAGE.  
IBM license  
Portions Copyright (c) 1995 by International Business Machines, Inc.  
International Business Machines, Inc. (hereinafter called IBM) grants permission under its copyrights to use, copy, modify, and distribute this Software  
with or without fee, provided that the above copyright notice and all paragraphs of this notice appear in all copies, and that the name of IBM not be  
used in connection with the marketing of any product incorporating the Software or modifications thereof, without specific, written prior permission.  
To the extent it has a right to do so, IBM grants an immunity from suit under its patents, if any, for the use, sale or manufacture of products to the ex-  
tent that such products are used for performing Domain Name System dynamic updates in TCP/IP networks by means of the Software. No immunity  
is granted for any product per se or for any other function of any product.  
THE SOFTWARE IS PROVIDED "AS IS", AND IBM DISCLAIMS ALL WARRANTIES, INCLUDING ALL IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL IBM BE LIABLE FOR ANY SPECIAL, DIRECT,  
INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER ARISING OUT OF OR IN CONNECTION WITH THE USE OR  
PERFORMANCE OF THIS SOFTWARE, EVEN IF IBM IS APPRISED OF THE POSSIBILITY OF SUCH DAMAGES.  
BSD 3-clause  
"New" or  
"Revised"  
License  
Copyright (c) [YEAR], [OWNER]  
All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form  
must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided  
with the distribution. Neither the name of the [ORGANIZATION] nor the names of its contributors may be used to endorse or promote products de-  
rived from this software without specific prior written permission.  
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED  
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON  
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN  
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
BSD 4-clause  
"Original" or  
"Old" License  
Copyright (c) [year], [copyright holder]  
All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation  
and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software  
developed by the organization.  
4. Neither the name of the organization nor the names of its contributors may be used to endorse or promote products derived from this software  
without specific prior written permission.  
THIS SOFTWARE IS PROVIDED BY COPYRIGHT HOLDER ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO  
EVENT SHALL {{COPYRIGHT HOLDER}} BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR  
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,  
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,  
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,  
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
432 / 444  
Licence name  
Licence text  
BSD-4-Clause  
(University of  
California-  
BSD-4-Clause (University of California-Specific)  
Copyright [various years] The Regents of the University of California. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
Specific)  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation  
and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software  
developed by the University of California, Berkeley and its contributors.  
4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software  
without specific prior written permission.  
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE  
DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR  
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,  
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE  
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
433 / 444  
Licence name  
Licence text  
Freetype Project The FreeType Project LICENSE  
License  
2006-Jan-27  
Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg  
Introduction  
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and  
contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their  
own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least. This license  
was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion and use of free software in commercial  
and freeware products alike. As a consequence, its main points are that:  
We don't promise that this software works. However, we will be interested in any kind of bug reports. (`as is' distribution)  
You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free' usage)  
You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge somewhere in your documenta-  
tion that you have used the FreeType code. (`credits')  
We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial products. We disclaim all warranties  
covering The FreeType Project and assume no liability related to The FreeType Project. Finally, many people asked us for a preferred form for a  
credit/disclaimer to use in compliance with this license. We thus encourage you to use the following text:  
"Portions of this software are copyright © 1996-2002, 2006 The FreeType Project (www.freetype.org). All rights reserved."  
Legal Terms  
Definitions  
Throughout this license, the terms `package', `FreeType Project', and `FreeType archive' refer to the set of files originally distributed by the authors  
(David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project', be they named as alpha, beta or final release. `You' refers to the li-  
censee, or person using the project, where `using' is a generic term including compiling the project's source code as well as linking it to form a  
`program' or `executable'. This program is referred to as `a program using the FreeType engine'. This license applies to all files distributed in the ori-  
ginal FreeType Project, including all source code, binaries and documentation, unless otherwise stated in the file in its original, unmodified form as dis-  
tributed in the original archive. If you are unsure whether or not a particular file is covered by this license, you must contact us to verify this.  
The FreeType Project is copyright (C) 1996-2000, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as spe-  
cified below.  
No Warranty  
THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT  
LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE  
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE  
PROJECT.  
Redistribution  
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create deriv-  
ative works of, distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any purpose;  
and to authorize others to exercise some or all of the rights granted herein, subject to the following conditions:  
Redistribution of source code must retain this license file (`FTL.TXT') unaltered; any additions, deletions or changes to the original files must be clearly  
indicated in accompanying documentation. The copyright notices of the unaltered, original files must be preserved in all copies of source files.  
Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribu-  
tion documentation. We also encourage you to put an URL to the FreeType web page in your documentation, though this isn't mandatory. These con-  
ditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If you use our work, you must acknowledge  
us. However, no fee need be paid to us.  
Advertising  
Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without  
specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your  
documentation or advertising materials: `FreeType Project', `FreeType Engine', `FreeType library', or `FreeType Distribution'. As you have not signed  
this license, you are not required to accept it. However, as the FreeType Project is copyrighted material, only this license, or another one contracted  
with the authors, grants you the right to use, distribute, and modify it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate  
that you understand and accept all the terms of this license.  
Contacts  
There are two mailing lists related to FreeType:  
[email protected]  
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for sup-  
port, start in this list if you haven't found anything to help you in the documentation.  
[email protected]  
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.  
Our home page can be found at: http://www.freetype.org  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
434 / 444  
Licence name  
Licence text  
Independent  
JPEG Group  
License  
The Independent JPEG Group's JPEG software README for release 6b of 27-Mar-1998  
This distribution contains the sixth public release of the Independent JPEG Group's free JPEG software. You are welcome to redistribute this software  
and to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. Serious users of this software (particularly those incorporating it  
into larger programs) should contact IJG at [email protected] to be added to our electronic mailing list. Mailing list members are notified of up-  
dates and have a chance to participate in technical discussions, etc. This software is the work of Tom Lane, Philip Gladstone, Jim Boucher, Lee  
Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Guido Vollbeding, Ge' Weijers, and other members of the Independent JPEG  
Group. IJG is not affiliated with the official ISO JPEG standards committee.  
LEGAL ISSUES  
In plain English:  
We don't promise that this software works. (But if you find any bugs, please let us know!) You can use this software for whatever you want. You don't  
have to pay us. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in your documentation  
that you've used the IJG code.  
In legalese:  
The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality, accuracy, merchantability, or  
fitness for a particular purpose. This software is provided "AS IS", and you, its user, assume the entire risk as to its quality and accuracy. This software  
is copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved except as specified below.  
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these  
conditions:  
1. If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice  
unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation.  
2. If only executable code is distributed, then the accompanying documentation must state that "this software is based in part on the work of the  
Independent JPEG Group".  
3. Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO  
LIABILITY for damages of any kind.  
These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to ac-  
knowledge us.  
Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products de-  
rived from it. This software may be referred to only as "the Independent JPEG Group's software".  
We specifically permit and encourage the use of this software as the basis of commercial products, provided that all warranty or liability claims are as-  
sumed by the product vendor. ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole proprietor of its copyright holder, Aladdin  
Enterprises of Menlo Park, CA. ansi2knr.c is NOT covered by the above copyright and conditions, but instead by the usual distribution terms of the  
Free Software Foundation; principally, that you must include source code if you redistribute it. (See the file ansi2knr.c for full details.)  
However, since ansi2knr.c is not needed as part of any program generated from the IJG code, this does not limit you more than the foregoing para-  
graphs do. The Unix configuration script "configure" was produced with GNU Autoconf. It is copyright by the Free Software Foundation but is freely  
distributable. The same holds for its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh). Another support script, install-sh, is copyright by  
M.I.T. but is also freely distributable.  
It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM, AT & T, and Mitsubishi. Hence arithmetic coding  
cannot legally be used without obtaining one or more licenses. For this reason, support for arithmetic coding has been removed from the free JPEG  
software. (Since arithmetic coding provides only a marginal gain over the unpatented Huffman mode, it is unlikely that very many implementations  
will support it.) So far as we are aware, there are no patent restrictions on the remaining code.  
The IJG distribution formerly included code to read and write GIF files. To avoid entanglement with the Unisys LZW patent, GIF reading support has  
been removed altogether, and the GIF writer has been simplified to produce "uncompressed GIFs". This technique does not use the LZW algorithm;  
the resulting GIF files are larger than usual, but are readable by all standard GIF decoders. We are required to state that  
"The Graphics Interchange Format(c) is the Copyright property of CompuServe Incorporated. GIF(sm) is a Service Mark property of CompuServe  
Incorporated."  
Internet  
Copyright (c) 1996 by Internet Software Consortium.  
Software  
Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright  
Consortium-IBM notice and this permission notice appear in all copies.  
License THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS  
SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE  
CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER  
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS  
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.  
Portions Copyright (c) 1995 by International Business Machines, Inc.  
International Business Machines, Inc. (hereinafter called IBM) grants permission under its copyrights to use, copy, modify, and distribute this Software  
with or without fee, provided that the above copyright notice and all paragraphs of this notice appear in all copies, and that the name of IBM not be  
used in connection with the marketing of any product incorporating the Software or modifications thereof, without specific, written prior permission.  
To the extent it has a right to do so, IBM grants an immunity from suit under its patents, if any, for the use, sale or manufacture of products to the ex-  
tent that such products are used for performing Domain Name System dynamic updates in TCP/IP networks by means of the Software. No immunity  
is granted for any product per se or for any other function of any product.  
THE SOFTWARE IS PROVIDED "AS IS", AND IBM DISCLAIMS ALL WARRANTIES, INCLUDING ALL IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL IBM BE LIABLE FOR ANY SPECIAL, DIRECT,  
INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER ARISING OUT OF OR IN CONNECTION WITH THE USE OR  
PERFORMANCE OF THIS SOFTWARE, EVEN IF IBM IS APPRISED OF THE POSSIBILITY OF SUCH DAMAGES.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
435 / 444  
Licence name  
Licence text  
Khronos License Copyright (c) 2013 The Khronos Group Inc.  
** ** Permission is hereby granted, free of charge, to any person obtaining a ** copy of this software and/or associated documentation files (the **  
"Materials"), to deal in the Materials without restriction, including ** without limitation the rights to use, copy, modify, merge, publish, ** distribute, sub-  
license, and/or sell copies of the Materials, and to ** permit persons to whom the Materials are furnished to do so, subject to ** the following condi-  
tions: ** ** The above copyright notice and this permission notice shall be included ** in all copies or substantial portions of the Materials. **  
** THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ** EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED  
TO THE WARRANTIES OF ** MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. ** IN NO EVENT  
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY ** CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION  
OF CONTRACT, ** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE ** MATERIALS OR THE USE OR OTHER  
DEALINGS IN THE MATERIALS.  
License of  
This software is provided 'as-is', without any express or implied warranty. In no event will the author be held liable for any damages arising from the use  
of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistrib-  
ute it freely, subject to the following restrictions: The origin of this software must not be misrepresented; you must not claim that you wrote the ori-  
ginal software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.  
Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.  
Stephan  
Brumme/ Zlib  
style License  
MIT License  
The MIT License  
Copyright (c) [year] [copyright holders]  
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to  
deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell  
copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:  
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.  
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO  
THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE  
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF  
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER  
DEALINGS IN THE SOFTWARE.  
Open Group  
License  
Open Group License  
Copyright 1996, 1998 The Open Group  
Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that  
the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation.  
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.  
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO  
THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE  
OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR  
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
Except as contained in this notice, the name of The Open Group shall not be used in advertising or otherwise to promote the sale, use or other deal-  
ings in this Software without prior written authorization from The Open Group.  
Public Domain  
Public domain code is not subject to any license.  
BSD One Clause BSD One Clause License  
License  
Copyright (c) [YEAR], [OWNER]  
All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.  
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED  
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON  
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN  
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
ISC License  
ISC License (ISCL)  
Copyright (c) 4-digit year, Company or Person's Name  
Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copy-  
right notice and this permission notice appear in all copies.  
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING  
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,  
DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR  
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION  
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
436 / 444  
Licence name  
Licence text  
SGI Free  
SGI FREE SOFTWARE LICENSE B (Version 2.0, Sept. 18, 2008)  
Software  
Copyright (C) [dates of first publication] Silicon Graphics, Inc. All Rights Reserved.  
License B v2.0  
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to  
deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell  
copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:  
The above copyright notice including the dates of first publication and either this permission notice or a reference to  
http://oss.sgi.com/projects/FreeB/ shall be included in all copies or substantial portions of the Software.  
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO  
THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL  
SILICON GRAPHICS, INC. BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR  
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
Except as contained in this notice, the name of Silicon Graphics, Inc. shall not be used in advertising or otherwise to promote the sale, use or other  
dealings in this Software without prior written authorization from Silicon Graphics, Inc.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
437 / 444  
Licence name  
Licence text  
Unicode Terms  
of Use  
Unicode Terms of Use  
For the general privacy policy governing access to this site, see the Unicode Privacy Policy. For trademark usage, see the Unicode® Consortium  
Name and Trademark Usage Policy.  
A. Unicode Copyright.  
1. Copyright © 1991-2014 Unicode, Inc. All rights reserved.  
2. Certain documents and files on this website contain a legend indicating that "Modification is permitted." Any person is hereby authorized, without  
fee, to modify such documents and files to create derivative works conforming to the Unicode® Standard, subject to Terms and Conditions  
herein.  
3. Any person is hereby authorized, without fee, to view, use, reproduce, and distribute all documents and files solely for informational purposes in  
the creation of products supporting the Unicode Standard, subject to the Terms and Conditions herein.  
4. Further specifications of rights and restrictions pertaining to the use of the particular set of data files known as the "Unicode Character  
Database" can be found in Exhibit 1.  
5. Each version of the Unicode Standard has further specifications of rights and restrictions of use. For the book editions (Unicode 5.0 and earlier),  
these are found on the back of the title page. The online code charts carry specific restrictions. All other files, including online documentation of  
the core specification for Unicode 6.0 and later, are covered under these general Terms of Use.  
6. No license is granted to "mirror" the Unicode website where a fee is charged for access to the "mirror" site.  
7. Modification is not permitted with respect to this document. All copies of this document must be verbatim.  
B. Restricted Rights Legend.  
Any technical data or software which is licensed to the United States of America, its agencies and/or instrumentalities under this Agreement is com-  
mercial technical data or commercial computer software developed exclusively at private expense as defined in FAR 2.101, or DFARS 252.227-7014  
(June 1995), as applicable. For technical data, use, duplication, or disclosure by the Government is subject to restrictions as set forth in DFARS  
202.227-7015 Technical Data, Commercial and Items (Nov 1995) and this Agreement. For Software, in accordance with FAR 12-212 or DFARS  
227-7202, as applicable, use, duplication or disclosure by the Government is subject to the restrictions set forth in this Agreement.  
C. Warranties and Disclaimers.  
1. This publication and/or website may include technical or typographical errors or other inaccuracies . Changes are periodically added to the in-  
formation herein; these changes will be incorporated in new editions of the publication and/or website. Unicode may make improvements  
and/or changes in the product(s) and/or program(s) described in this publication and/or website at any time.  
2. If this file has been purchased on magnetic or optical media from Unicode, Inc. the sole and exclusive remedy for any claim will be exchange of  
the defective media within ninety (90) days of original purchase.  
3. EXCEPT AS PROVIDED IN SECTION C.2, THIS PUBLICATION AND/OR SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF  
ANY KIND EITHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTIES OF MERCHANTABILITY,  
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. UNICODE AND ITS LICENSORS ASSUME NO RESPONSIBILITY  
FOR ERRORS OR OMISSIONS IN THIS PUBLICATION AND/OR SOFTWARE OR OTHER DOCUMENTS WHICH ARE REFERENCED BY OR  
LINKED TO THIS PUBLICATION OR THE UNICODE WEBSITE.  
D. Waiver of Damages.  
In no event shall Unicode or its licensors be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatso-  
ever, whether or not Unicode was advised of the possibility of the damage, including, without limitation, those resulting from the following: loss of use,  
data or profits, in connection with the use, modification or distribution of this information or its derivatives.  
E. Trademarks & Logos.  
1. The Unicode Word Mark and the Unicode Logo are trademarks of Unicode, Inc. "The Unicode Consortium" and "Unicode, Inc." are trade names  
of Unicode, Inc. Use of the information and materials found on this website indicates your acknowledgement of Unicode, Inc.'s exclusive world-  
wide rights in the Unicode Word Mark, the Unicode Logo, and the Unicode trade names.  
2. The Unicode Consortium Name and Trademark Usage Policy ("Trademark Policy") are incorporated herein by reference and you agree to abide  
by the provisions of the Trademark Policy, which may be changed from time to time in the sole discretion of Unicode, Inc.  
3. All third party trademarks referenced herein are the property of their respective owners.  
F. Miscellaneous.  
1. Jurisdiction and Venue. This server is operated from a location in the State of California, United States of America. Unicode makes no represent-  
ation that the materials are appropriate for use in other locations. If you access this server from other locations, you are responsible for compli-  
ance with local laws. This Agreement, all use of this site and any claims and damages resulting from use of this site are governed solely by the  
laws of the State of California without regard to any principles which would apply the laws of a different jurisdiction. The user agrees that any dis-  
putes regarding this site shall be resolved solely in the courts located in Santa Clara County, California. The user agrees said courts have personal  
jurisdiction and agree to waive any right to transfer the dispute to any other forum.  
2. Modification by Unicode. Unicode shall have the right to modify this Agreement at any time by posting it to this site. The user may not assign any  
part of this Agreement without Unicode's prior written consent.  
3. Taxes. The user agrees to pay any taxes arising from access to this website or use of the information herein, except for those based on Unicode's  
net income.  
4. Severability. If any provision of this Agreement is declared invalid or unenforceable, the remaining provisions of this Agreement shall remain in  
effect.  
5. Entire Agreement. This Agreement constitutes the entire agreement between the parties.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
438 / 444  
Licence name  
Licence text  
libpng License  
Libpng License  
This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy and the notices in the file png.h that is  
included in the libpng distribution, the latter shall prevail.  
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:  
If you modify libpng you may insert additional notices immediately following this sentence. libpng versions 1.0.7, July 1, 2000, through 1.0.13, April 15,  
2002, are Copyright (c) 2000-2002 Glenn Randers-Pehrson and are distributed according to the same disclaimer and license as libpng-1.0.6 with  
the following individuals added to the list of Contributing Authors:  
Simon-Pierre Cadieux, Eric S. Raymond, Gilles Vollant  
and with the following additions to the disclaimer:  
There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library  
will fulfill any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accur-  
acy, and effort is with the user.  
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed ac-  
cording to the same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors:  
Tom Lane, Glenn Randers-Pehrson, Willem van Schaik.  
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer  
and license as libpng-0.88, with the following individuals added to the list of Contributing Authors:  
John Bowler, Kevin Bracey, Sam Bushell, Magnus Holmgren, Greg Roelofs, Tom Tanner.  
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this  
copyright and license, "Contributing Authors" is defined as the following set of individuals:  
Andreas Dilger, Dave Martindale, Guy Eric Schalnat, Paul Schmidt, Tim Wegner.  
The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including,  
without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for  
direct, indirect, incidental, special, exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if ad-  
vised of the possibility of such damage. Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any  
purpose, without fee, subject to the following restrictions:  
1. The origin of this source code must not be misrepresented.  
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.  
3. This Copyright notice may not be removed or altered from any source or altered source distribution.  
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to support-  
ing the PNG file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated.  
A "png_get_copyright" function is available, for convenient use in "about" boxes and the like:  
printf("%s",png_get_copyright(NULL));  
Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31).  
Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative.  
Glenn Randers-Pehrson  
[email protected]  
April 15, 2002  
zlib License  
The zlib/libpng License  
Copyright (c) [year] [copyright holders]  
This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the  
use of this software.  
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, sub-  
ject to the following restrictions:  
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a  
product, an acknowledgment in the product documentation would be appreciated but is not required.  
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.  
3. This notice may not be removed or altered from any source distribution.  
15.5.9. Table for location of child seats using the car's  
seatbelts  
This table gives a recommendation for which child seats suit which locations, and for what size of child.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
439 / 444  
Note  
Always read the owner's manual section on installing a child seat before installing one in the car.  
Weight  
Front seat (with deactivated airbag, only rear-facing child  
seats)[1]  
Front seat (with activated airbag, only front-facing child  
seats)[1]  
Outer rear  
seat  
Centre rear  
seat  
Group 0  
U[2]  
X
U
U
max 10 kg  
Group 0+ U[2]  
max 13 kg  
X
U
U
Group 1  
L
L
X
UF[2] [3]  
UF[2]  
UF[2]  
U[3], L  
U, L  
U
U[3]  
9-18 kg  
Group 2  
U
15 - 25 kg  
Group 3  
22 -  
U
36 kg  
U: Suitable for universal category restraints approved for use in this mass group.  
UF: Suitable for front-facing universally approved child seats.  
L: Suitable for particular child restraints. These restraints may be of the specific vehicle, restricted or semi-universal categories.  
X: The seat is not suitable for children in this mass group.  
Warning  
Never use a rear-facing child seat on the front passenger seat if the passenger airbag is activated.  
[1]  
The seat cushion extension must always be retracted for the installation of child seats.  
[2]  
Adjust the seat to a more raised position and, if necessary, seat cushion inclination. Adjust backrest inclination.  
Volvo recommends rear-facing child seat for children in this mass group.  
[3]  
15.5.10. Table for location of i-Size child seats  
The table gives a recommendation for which i-Size child seats suit which locations, and for what size of child.  
The child seat must be approved in accordance with UN Reg R129.  
Note  
Always read the owner's manual section on installing a child seat before installing one in the car.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
440 / 444  
Type of child  
seat  
Front seat (with deactivated airbag, only rear-facing  
child seats)[1]  
Front seat (with activated airbag, only front-facing  
child seats)[1]  
Rear seat, outer  
seat[1]  
Centre rear  
seat  
i-Size child  
seats  
Yes[2] [3] [4]  
Yes[2] [3] [4]  
Yes  
X
[1]  
Volvo recommends that children travel in a rear-facing child seat until as late an age as possible, at least until 4 years of  
age.  
[2]  
[3]  
[4]  
Adjust the backrest so that the head restraint does not interfere with the child seat.  
For child restraint systems with support legs, adjust the seat to a more upright position.  
Varies depending on market.  
15.5.11. Table for location of ISOFIX child seats  
The table gives a recommendation for which ISOFIX child seats suit which locations, and for what size of  
child.  
The child seat must be approved in accordance with UN Reg R44 and the vehicle model must be included in the  
manufacturer's list of vehicles.  
Note  
Always read the section in the Owner's Manual on child restraint installation before installing a child restraint in the  
vehicle.  
Weight  
Size  
class[1]  
Type of child  
seat  
Front seat (with deactivated airbag, only  
rear-facing child seats)[2] [3] [4]  
Front seat (with activated airbag, only  
front-facing child seats)[2] [3] [4]  
Outer rear  
seat  
Centre rear  
seat  
Group 0 max  
10 kg  
E
Rear-facing in-  
fant seat  
IL[2], X[5]  
X
IL  
X
Group 0+ max  
13 kg  
E
Rear-facing in-  
fant seat  
IL[2] [6], X[5]  
X
IL  
X
C
D
A
Rear-facing  
child seat  
Rear-facing  
child seat  
Group 1 9-18  
Front-facing  
child seat  
X
IL[2] [6] [7], X[5]  
IL[7]  
IUF[7]  
,
X
kg  
B
B1  
C
D
Front-facing  
child seat  
Front-facing  
child seat  
Rear-facing  
child seat  
IL[2] [6], X[5]  
X
IL  
X
Rear-facing  
child seat  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
441 / 444  
Weight  
Size  
class[1]  
Type of child  
seat  
Front seat (with deactivated airbag, only  
rear-facing child seats)[2] [3] [4]  
Front seat (with activated airbag, only  
front-facing child seats)[2] [3] [4]  
Outer rear  
seat  
Centre rear  
seat  
Group 2/3 15-  
36 kg  
-
Front-facing  
child seat  
X
IL  
IL  
X
IL: Suitable for particular ISOFIX child restraint systems. These child restraint systems are those of the specific vehicle, restricted or semi-universal categories.  
IUF: Suitable for ISOFIX forward child restraint systems of universal category approved for use in the mass group.  
X: Not suitable for ISOFIX child restraint systems.  
Warning  
Never use a rear-facing child seat on the front passenger seat if the passenger airbag is activated.  
Note  
If an i-Size/ISOFIX child seat has no size classification, the car model must be included on the vehicle list for the child  
seat.  
Note  
Volvo recommends contacting an authorised Volvo dealer for information about which i-Size/ISOFIX child seats Volvo  
recommends.  
[1]  
For child seats with the ISOFIX fixture system there is a size classification to help users choose the right type of child seat.  
The size class can be read on the child seat's label.  
[2]  
Works for the installation of i-Size child restraint systems and ISOFIX child restraint systems (IL) if the passenger seat is  
equipped with ISOFIX mountings (varies depending on market) and is i-Size-marked. The upper mounting point for child  
restraint systems is only available for an i-Size-marked position.  
[3]  
[4]  
[5]  
[6]  
[7]  
The seat cushion extension must always be retracted for the installation of child seats.  
For child restraint systems with support legs, adjust the seat to a more upright position.  
Applicable if the car is not fitted with an ISOFIX bracket.  
Adjust the backrest so that the head restraint does not interfere with the child seat.  
Volvo recommends rear-facing child seat for children in this mass group.  
15.6. Labels  
Your car has a number of labels that provide information about the car and its use, such as specifications and  
warnings.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
442 / 444  
Warning label  
Yellow signal panel with warning symbol.  
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.  
Notice label  
Notice symbol in signal panel.  
Indicates a hazardous situation which, if not avoided, could result in minor or moderate damage to property.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
443 / 444  
Information label  
Label with no signal panel.  
Indicates important information but no risk for personal injury or damage to property.  
Note  
Depicted labels  
Labels depicted in this manual are generic representations of those found around your car. The manual only contains  
their location and what kind of information they hold. Find the actual label for specific information about your car.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
444 / 444  

Related Topics

General car characteristics Powertrain specifications Fluid specifications Certificates and type approvals Labels

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot