2025-2026 Volvo EX40 SUV Specifications -> Powertrain specifications User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Specifications -> Powertrain specifications for Your Volvo EX40 SUV First Generation (2025-2026)

Labels  
1
Label location  
1
Product label  
The product label is located on the right-hand door pillar and will be visible when the door is opened.  
Product label  
Examples of information you can find on the product label:  
Type approval number  
Vehicle identification number  
Weight information  
Code designation for exterior colour  
Note  
Labels depicted in this manual are generic representations of those found around your car. The manual only contains  
their location and what kind of information they hold. Find the actual label for specific information about your car.  
Tip  
For many markets, more information can also be found in the car's registration document.  
15.2. Powertrain specifications  
Find the specifications regarding your car's propulsion.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
406 / 444  
These specifications provide details about what your car is capable of and certified for. They also specify data on relevant char-  
ging cables.  
15.2.1. Electric motor specifications  
The Single Motor is powered by one electric motor (rear) and you can find the specifications here.  
Single Motor Extended range  
Rear  
Electric motor type  
Electric motor model  
Max. power output  
Synchronous motor with permanent magnet  
Total car (system)  
CCJDG  
185  
kW  
hp  
252  
N/A  
Rated power (continuous power)  
Max. torque  
kW  
Nm  
lb-ft  
420  
310  
Note  
If data is missing it will be updated at a later stage.  
15.2.2. The car's certified values for range and electricity  
consumption  
These are the certified values for your car's range and use of electrical power. However, range and electricity  
consumption vary according to the circumstances and driving conditions. These values should not be  
interpreted as an expected range but should primarily be used to compare different cars.  
Procedure used to establish the values  
The values in the table below are established in accordance with WLTP[1], which is an international test method performed in a  
laboratory environment. The method uses drive cycles to simulate an average driving run of the car. Every drive cycle is determ-  
ined by different conditions such as speed, time and mileage.  
The standard is based on four drive cycle profiles with different average speeds:  
Low speed  
Urban driving  
Medium speed  
High speed  
Suburban driving  
Extra-urban driving  
Motorway driving  
Extra high speed  
Symbol explanation  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
407 / 444  
This is an explanation of the symbols used in the specification table below.  
Certified value for the car's potential range (km)[2]  
Urban and suburban driving.  
.
Average value over all four drive cycle phases (urban, suburban, extra-urban and motorway driving).  
Certified value for the car's electricity consumption (kWh/100 km). The value is an average over all four drive cycle phases (urban, suburban, extra-urban and  
motorway driving).  
Low value.  
High value.  
Specifications for range and electricity consumption  
Single Motor Extended Range  
764  
702  
552  
498  
16.6  
18.3  
Note  
If data is missing in the table, it will be updated at a later date.  
Certified values and actual values  
When driving, the car's range and electricity consumption can differ from the certified value indications. Some reasons for this  
may be:  
Driving style.  
Extra equipment and cargo affect the car's weight or air resistance.  
Non-standard wheels can increase rolling resistance and air resistance.  
High speed causes increased air resistance.  
Road, traffic and weather conditions.  
The general condition of the car.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
408 / 444  
[1]  
[2]  
Worldwide Harmonised Light-Duty Vehicles Test Procedure  
The value should not be interpreted as an expected range. The range is difficult to achieve during normal driving.  
15.2.3. Charging cable specifications  
These specifications provide details about mode 2 charging cables. Mode 2 charging cables can be  
purchased from the Volvo Extras shop.  
-32 °C to 50 °C (-25 °F to 122 °F)  
Ambient temperature  
Residual-current device  
Mode 2 charging cables have a built-in residual-current device that protects the car and the user from electric shocks caused by  
system faults.  
Warning  
The residual-current device helps to protect the car's charging system, but there is no guarantee that an overload never  
occurs.  
Important  
The residual-current device does not protect the household socket.  
Temperature monitoring  
The mode 2 cable is also equipped with a control unit, which has a built-in overtemperature monitoring function. This monitors  
the temperature of both the cable and the household socket.  
Warning  
The charging cable's temperature monitoring helps to protect the car's charging system, but there is no guarantee that  
overheating will never occur.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
409 / 444  
Important  
If temperature monitoring has automatically reduced the charging current on repeated occasions and charging has  
been interrupted, the cause of overheating must be investigated and corrected.  
Avoid exposing the control unit and its plug connector to direct sunlight. The overheating protection in the plug  
connector may otherwise reduce or stop the charging of your car.  
If charging is unintentionally stopped, both the charging cable and the cars charging system should be checked by a  
trained and qualified Volvo service technician. The household socket should also be checked by a licensed electrician.  
15.2.4. Charging port labels and identifiers  
Your car has a label with an identifier on it that provides information about charging compatibility.  
Charging compatibility identification  
You can find out if your car and the charging point are compatible by looking at the identification labels. The labels are given in  
accordance with the EN 17186 standard. The identification labels include a letter or letters. If a letter on the charging point  
matches a letter on your car's identification label, it means that they are compatible.  
The identification label is located on the inside of the charging lid.  
Charging compatibility identification label.  
The letters indicate the types of charging point your car is compatible with. Your car has three letters defining compatibility.  
Details can be found in the EN 17186 standard.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
410 / 444  
Identification label Charging type  
AC[1] charging type 2  
DC[2] charging (including Combined Charging System (CCS) Combo 2)  
C
K and L  
[1]  
Alternating current  
[2]  
Direct current  
15.3. Wheel and tyre specifications  
Here you can find specific data for wheels and tyres applicable to your car.  
Note  
There are more recommendations regarding wheels and tyres that are important to be aware of.  
15.3.1. Approved tyre pressure  
You can find the approved tyre pressures for your car in the table below.  
The recommended pressure for approved tyres can be found on the tyre pressure label. It's located on the door pillar on the  
driver's side and is visible when the door is opened.  
Tyre size  
Speed  
Load 1-3 persons  
Max load  
ECO pressure  
Front  
Rear  
Front  
Rear  
Front/rear  
kPa (psi)  
kPa (psi)  
kPa (psi)  
kPa (psi)  
kPa (psi)  
235/50 R19  
255/45 R19  
235/45 R20  
255/40 R20  
0-180 km/h (0-112 mph)  
280 (41)  
420 (60)  
280 (41)  
280 (41)  
420 (60)  
280 (41)  
280 (41)  
420 (60)  
Temporary Spare Tyre  
max 80 km/h (max 50 mph)  
420 (60)  
420 (60)  
Important  
Never switch the front and rear wheels around.  
15.3.2. Approved wheel and tyre sizes  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
411 / 444  

Related Topics

Popular Owner Manuals