2025-2026 Volvo EX40 SUV Visibility, mirrors and exterior lights -> Exterior lights User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Visibility, mirrors and exterior lights -> Exterior lights for Your Volvo EX40 SUV First Generation (2025-2026)

9. Visibility, mirrors and exterior lights  
Learn how to control your car’s lights, mirrors and wipers for better visibility when the conditions call for it.  
Front view of the car showing exterior lights, mirrors and windscreen wipers  
Your car is equipped with multiple features to assist you in your driving. Some are designed to improve safety, while others im-  
prove visibility. Some features are designed with both purposes in mind. Reading this section of the manual can assist in mak-  
ing your driving experience safer and more comfortable.  
9.1. Exterior lights  
Your car has a range of lighting capabilities. You can select and control the different lighting options.  
Warning  
Car lights systems which are dependent on ambient light detection do not absolve the driver of responsibility for  
ensuring that proper lighting is used for all situations according to local laws and traffic regulations.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
224 / 444  
Exterior lights refers to all of the exterior illumination functions and features that affect visibility.  
1
2
3
Exterior lights controls locations  
1
You control certain driving lights, such as the lighting modes, fog lights and the direction indicators with the left-hand  
steering wheel stalk.  
You select exterior convenience lights in the centre display.  
2
3
The hazard warning lights button is located below the centre display.  
Some lighting features rely on the car's ability to sense that there are poor light conditions outside. Make sure that the car cam-  
eras are kept clean and are well-maintained. If the cameras’ views are affected by dirt, they can't do their job properly. They need  
to be able to obtain enough information so that they can properly direct the car’s responses.  
Note  
Condensation in the lights  
Exterior lighting may temporarily contain water from condensation. This is normal and all exterior lights are designed to  
withstand this. Condensation is normally vented out of the light housing after a period of time.  
9.1.1. Driving lights  
Driving lights mix automatic behaviours and direct controls which allow you to adapt to any situation or  
visibility conditions.  
Important  
The driver is always responsible for ensuring that the car is driven while using a lights mode that is suitable for the  
current driving conditions and local traffic regulations.  
Exterior lighting  
You can choose between several different exterior lighting modes by rotating the ring on the left-hand steering wheel stalk.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
225 / 444  
Auto  
The automatic lights mode[1] allows your car to automatically detect and calculate which lighting mode is most suitable depending on the  
lighting conditions.  
Passing beam  
Position lights  
Off  
You can manually select the passing beam to keep the front lights dipped.  
The position lights are points of illumination around the car that make your car more visible to other road users.  
0 deactivates all lighting modes.[2]  
Automatic high  
beam  
Automatic high beam allows the high beam to automatically react to traffic ahead.[3]  
Additional lights  
You can control the high beam and the direction indicators with the left-hand steering wheel stalk.  
The hazard warning lights help you to warn others of potential risks. You can turn them on or off by pressing the button below  
the centre display.  
There are additional lights that can be enabled or adjusted, such as:  
The rear fog light warns traffic behind you of your presence in poor light conditions. You activate it via the button on the left-hand steering wheel stalk.  
The front fog lights warn traffic of your presence in poor light conditions. You activate them via the button on the left-hand steering wheel stalk.  
Rear fog light  
Front fog lights  
[1]  
AUTO  
[2]  
Some exterior lights may remain on when driving based on regulations in various market regions.  
The rotating ring springs back to AUTO when selecting the automatic high beam.  
[3]  
9.1.1.1. Operating the driving lights  
Familiarise yourself with operating the lights controls that are available via the left-hand steering wheel stalk.  
The horizontal stalk positions  
You can move the left-hand stalk forwards or backwards to switch between different lighting selections.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
226 / 444  
The selections available are:  
High beam on  
High beam off  
High beam flash  
Manual high beam  
When the automatic lights mode[1] or the manual passing beam is selected on the left-hand steering wheel stalks rotating  
•
ring, push or pull the stalk to turn the manual high beam on or off.  
Automatic high beam  
When the automatic high beam is activated on the left-hand steering wheel stalks rotating ring, pull the stalk fully to  
deactivate the automatic high beam.[2]  
•
High beam flash  
Pull the left-hand steering wheel stalk slightly to activate the high beam flash.  
•
[1]  
AUTO  
[2]  
The rotating ring always springs back to AUTO when selecting the automatic high beam.  
9.1.1.2. High beam  
The high beam is important for your driving visibility. There are different states you can use to suit your  
needs.  
Important  
Remember that your ability to see the road properly in low lighting conditions is important not just for your own safety,  
but for other road users and pedestrians too.  
The high beam is more powerful and has a longer reach of illumination than the passing beam. To use the high beam, you must  
first activate the automatic lights mode[1] or the passing beam.  
You can choose between either the automatic high beam or the manual high beam.  
You activate the automatic high beam by rotating the ring on the left-hand steering wheel stalk to the automatic high beam  
symbol  
. The ring always springs back to the automatic lights mode  
.
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
227 / 444  
When the automatic high beam is enabled, your car automatically adapts the beam pattern to avoid dazzling other road users.  
The automatic high beam's adaptive capabilities  
Note  
When enabled, the automatic high beam only activates at speeds over approximately 20 km/h (12 mph) in low light.  
There are symbols in the driver display that show which high beam setting is currently active. These include:  
The manual high beam is active.  
The automatic high beam is enabled.  
The automatic high beam is active.  
Important  
Make sure that the car cameras are well-maintained and kept clean. If the cameras’ views are obscured by dirt, they will  
not be able to obtain enough information to properly direct the car’s lighting responses.  
[1]  
AUTO  
9.1.1.3. Passing beam  
The passing beam reduces the risk of dazzling other road users.  
The passing beam is part of the automatic lights mode. However, you can manually select the passing beam to keep the front  
lights dipped.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
228 / 444  
Tip  
Poor lighting and dark conditions  
If you have the automatic lights mode selected on the left-hand stalk's rotating ring and your car detects poor lighting or  
dark conditions, the car automatically switches the passing beam on. When the car detects better lighting conditions  
again, such as when you exit a tunnel, it automatically switches the passing beam off.  
9.1.1.3.1. Activating the passing beam  
The passing beam can be manually selected on the rotating ring on the left-hand steering wheel stalk.  
Manually selecting the passing beam keeps the front lights dipped.  
The passing beam symbol on the rotating ring on the left-hand stalk  
1. Rotate the ring on the left-hand steering wheel stalk to the passing beam  
position.  
Deactivate the passing beam by selecting a different lighting mode.  
9.1.1.3.2. Cornering lights  
The cornering lights improve visibility in the immediate vicinity of the car.  
When the passing beam or the automatic lights mode[1] is active, cornering lights trigger when driving at low speeds in poor  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
229 / 444  
lighting or dark conditions.  
The cornering lights  
The cornering lights illuminate the area close to the car to give you better visibility when turning.  
Note  
When turning without using the indicators, only the light on the side you are turning towards will illuminate.  
[1]  
AUTO  
9.1.1.4. Activating the front fog lights  
The front fog lights are designed to warn traffic of your presence in bad weather with poor light conditions.  
You need to manually activate the front fog lights via the button on the left-hand steering wheel stalk.  
Note  
The front fog lights can not be activated if the rotating ring on the left-hand stalk is in the 0 position.  
1. Press the button marked with the front fog lights symbol  
on the left-hand steering wheel stalk to turn it on or off.  
>
The fog lights symbol appears in the driver display showing the light is active.  
9.1.1.5. Activating the rear fog light  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
230 / 444  
The rear fog light is designed to warn traffic behind you of your presence in bad weather with poor light  
conditions.  
You need to manually activate the rear fog light via the button on the left-hand steering wheel stalk.  
Note  
The rear fog light can not be activated if the rotating ring on the left-hand stalk is in the 0 position.  
When the position lights are selected, the rear fog light only activates if the front fog lights are on.  
1. Press the button marked with the rear fog light symbol  
on the left-hand steering wheel stalk to turn it on or off.  
>
The rear fog light symbol appears in the driver display showing the light is active.  
The rear fog light is switched off automatically if you move the rotating ring on the left-hand stalk to the 0 symbol.  
Note  
When you connect a trailer the rear fog light may not illuminate as the rear fog light functionality is instead transferred to  
the trailer. Check if the trailer is equipped with a rear fog light before activating the rear fog light to ensure safe operation.  
9.1.1.6. Activating the position lights  
The position lights help to alert other road users to the presence of your car.  
The position lights are useful when you need to make other road users aware of your position, such as when you intend to  
leave the car stationary for a short period of time.  
The position lights symbol on the rotating ring on the left-hand stalk  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
231 / 444  
1. Rotate the ring on the left-hand steering wheel stalk to the position lights  
position.  
The position lights will remain on for a long time when your car is parked. Deactivate the position lights by selecting a different  
primary lighting mode.  
Note  
Opening the boot  
If you open the boot in low lighting conditions, the rear position lights automatically activate.  
9.1.1.7. Re-orientating lights to local traffic  
If you visit a region with a different driver's side to your own, you can change the orientation of the lights in  
settings.  
When you re-orientate the lights to local traffic, the lights adjust to reduce glare and avoid dazzling other road users.  
Selecting the orientation of the lights  
1. Press the car symbol  
in the bottom bar and go to Settings.  
2. Go to Controls → Lights and displays → Exterior lights → Adapt lights for right-hand traffic.  
3. Re-orientate the lights by pressing on or off.  
>
A notification appears in the driver display.  
Important  
Until deselected, the lights remain re-orientated each time you start a new drive. Remember to deactivate it when you no  
longer need to change the orientation of the lights.  
9.1.1.8. Hazard warning lights  
If there is a potential risk to surrounding traffic, you should turn the hazard lights on. This helps to alert other  
road users of the need for greater awareness.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
232 / 444  
Important  
It is the driver's responsibility to use hazard lights according to local laws and traffic regulations.  
The hazard warning lights button is located below the centre display.  
The location of the hazard warning lights button below the centre display  
The status and interaction point to control the hazard lights is signified by the associated symbol.  
Automatic activation  
The hazard warning lights turn on automatically when the emergency brake lights are triggered due to sudden braking. You can  
either turn them off again with the button, or let them turn off automatically when you begin driving again.  
In the event of a collision  
Your hazard lights will automatically turn on in the event of a collision.[1]  
[1]  
This is dependent on local regulations and regional standards.  
9.1.1.8.1. Activating the hazard warning lights  
The hazard warning lights are essential for driving safety. Be sure that you know how to work them.  
Hazard warning lights symbol  
When you get into the car, the hazard warning lights button lights up, showing that you can use it.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
233 / 444  
1. Press the hazard warning lights button below the centre display.  
>
Both of the direction indicator symbols in the driver display and the hazard warning lights button flash simultaneously in  
the same rhythm as the lights. You will also hear a ticking sound.  
9.1.2. Operating the direction indicators  
Use the direction indicators to communicate how you intend to manoeuvre your car. The controls are located  
on the left-hand steering wheel stalk.  
The indicators have two types of activation – quick and standard. While the indicators are blinking, you will hear a ticking sound  
and see a direction indicator symbol in the driver display.  
The indicators on the left-hand stalk  
Quick indication  
1. Move the left-hand steering wheel stalk slightly up or down and allow it to spring back to the middle.  
>
The indicators blink three times before turning off.  
Standard indication  
2. Move the left-hand steering wheel stalk up to turn the right indicator on and down to turn the left indicator on.  
>
The indicators blink continuously until you straighten the steering wheel out after turning.  
Note  
You can cancel the direction indicators by moving the left-hand steering wheel stalk back to its original position.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
234 / 444  
Note  
Indicator malfunction  
In the event of any malfunction or damage to the direction indicators, the sound and the flashing indicator symbol will be  
twice as fast as normal and the malfunction symbol appears in the driver display.  
9.1.3. Exterior convenience lights  
There are lighting functions available that make it easier to see when you are outside and approaching your  
car.  
Greeting lights  
Certain lights automatically activate for a short period of time when you approach and unlock your car.  
Guidance light  
When you lock and leave your car, it can provide extra lighting around the exterior for a short period of time.  
9.1.3.1. Greeting lights  
Your car can indicate that it recognises you coming with greeting lights.  
You activate the feature in the centre display.  
Greeting lights  
A brief light sequence triggers when you approach and unlock your car.  
9.1.3.1.1. Enabling the greeting lights  
You can turn on the greeting lights sequence for when you unlock your car.  
The greeting lights display a short lights sequence and give better visibility as you approach and unlock your car.  
1. Press the car symbol  
in the bottom bar and go to Settings.  
2. Go to Controls → Locking → Greeting lights.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
235 / 444  
3. Turn the greeting lights on or off.  
The greeting lights setting stays active until you disable it.  
9.1.3.2. Guidance light  
The guidance light helps you to see when you're outside of the car and to be seen by others. This is useful  
when you are parked in a dark location.  
The guidance light provides extra lighting around the exterior of your car for a short period of time when you lock and leave it.  
You can activate the guidance light by using the left-hand steering wheel stalk.  
9.1.3.2.1. Activating the guidance light  
Find the activation controls for the guidance light.  
Note  
Make sure that your car is stationary and turned off before you activate the guidance light.  
1. Move the left-hand steering wheel stalk forward and release.  
>
A notification appears in the driver display to indicate that the guidance light is active. The outer lighting, such as the  
position lights, headlight beams and number plate lighting, turns on.  
2. Get out of the car and lock the door.  
The guidance light is active for about one minute.  
9.2. Mirrors  
The rear-view mirror and the two wing mirrors are important for your driving awareness. Make sure that you  
adjust the mirrors to your needs before driving.  
Rear-view mirror  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
236 / 444  

Related Topics

Visibility, mirrors and exterior lights
Mirrors Wipers and washers

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot