Rain sensor
If your car detects water on the front windscreen when the rain sensor is active, the wipers will start automatically.
You can press the rain sensor button on the stalk to activate the sensor and turn the scroll wheel to adjust its sensitivity. The
rain sensor will stay active until you press the button again or select another wiper mode. When the rain sensor is active, you
can see a symbol in the driver display.
Active rain sensor symbol
Washers
The washer nozzles are integrated into the wiper arms for efficient washer fluid distribution. The nozzles are automatically
heated in cold conditions to prevent the washer fluid from freezing.
Your car tells you when it's time to refill the washer fluid. When washer fluid is running low, a message appears in the centre
display.
Important
Maintenance, refilling and replacing
Clean the wiper blades regularly.
Replace the wiper blades if they show signs of wear.
Refill washer fluid when your car tells you to.
Avoid using the wipers without lubrication from either rain or washer fluid. It can cause wear or damage.
Car wash safety
Turn the rain sensor off when you enter a car wash. Otherwise, the rain sensor will cause the wipers to activate, which
could lead to damage.
9.3.1. Controlling front wipers
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
241 / 444