2018-2026 Volvo V60 SUV SAFETY -> Buckling and unbuckling seat belts User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

SAFETY -> Buckling and unbuckling seat belts for Your Volvo V60 SUV Second Generation (2018-2026)

SAFETY  
||  
Buckling and unbuckling seat belts  
Make sure that all passengers have buckled  
their seat belts before starting to drive.  
Buckling seat belts  
1. Pull out the belt slowly and make sure it is  
not twisted or damaged.  
WARNING  
Never repair the belt yourself. Repairs  
should only be performed by a trained  
and qualified Volvo service technician.  
NOTE  
Any device used to induce slack into  
the shoulder belt portion of the three-  
point belt system will have a detrimen-  
tal effect on the amount of protection  
available in the event of a collision.  
The seat belt is equipped with a seat belt  
retractor that will lock up in the following  
situations:  
if the belt is pulled out too quickly.  
during braking and acceleration.  
if the vehicle is leaning excessively.  
when driving in turns.  
The seat back should not be tilted too  
far back. The shoulder belt must be  
taut in order to function properly.  
Do not use any type of child restraint in  
the front passenger seat. We recom-  
mend that children who have outgrown  
these devices sit in the rear seat with  
the seat belt properly fastened.  
if the automatic locking retractor/emer-  
gency locking retractor (ALR/ELR) is  
activated. Each seat belt (except for the  
driver's) is equipped with an ALR func-  
tion, which is designed to keep the seat  
belt taut when installing a child  
Related information  
restraint. ALR is activated when the seat  
belt is pulled out as far as possible. If  
this is done, a sound from the seat belt  
retractor will be audible, which is nor-  
mal. The seat belt can now only be fed  
into the retractor, not pulled out. This  
function is automatically disabled when  
the seat belt is unbuckled and fully  
retracted.  
Safety (p. 42)  
Seat belt tensioners (p. 50)  
Buckling and unbuckling seat belts  
(p. 48)  
Door and seat belt reminders (p. 51)  
48  
SAFETY  
2. Buckle the seat belt by pushing the latch  
plate into the receptacle.  
3. The height of the seat belts in the front  
seats can be adjusted.  
> A distinct "click" indicates that the belt  
is locked into place.  
WARNING  
Always insert the seat belt latch plate into  
the belt buckle on the correct side. Failure  
to do so could cause the seat belts and belt  
buckles to malfunction in a collision. There  
is a risk of serious injury.  
The belt should be positioned closely over the shoul-  
der (against the collarbone, not down over the arm).  
4. Tighten the lap section of the seat belt  
over the hips by pulling the diagonal sec-  
tion upward toward the shoulder.  
Press the button on the seat belt holder  
and move the belt up or down.  
Position the belt as high as possible with-  
out it chafing against the neck.  
The lap section of the seat belt should be positioned  
low on the hips (not against the abdomen).  
}}  
49  

Related Topics

Popular Owner Manuals