2019-2026 Volvo V90 SUV DRIVER SUPPORT -> Rear Collision Warning* User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

DRIVER SUPPORT -> Rear Collision Warning* for Your Volvo V90 SUV Second Generation (2019-2026)

DRIVER SUPPORT  
Rear Collision Warning*62  
Rear Collision Warning*64  
WARNING  
The Rear Collision Warning63 (RCW) function  
can help the driver avoid rear-end collisions  
from vehicles approaching from behind.  
The function can alert drivers of following vehi-  
cles of the risk of a collision by rapidly flashing  
the turn signals.  
limitations  
The function is supplementary driver  
support intended to facilitate driving  
and help make it safer – it cannot han-  
dle all situations in all traffic, weather  
and road conditions.  
In some situations, it may be difficult for Rear  
Collision Warning (RCW) to warn the driver  
of a collision risk.  
This may be the case if:  
the vehicle approaching from the rear is  
detected at a late stage  
The driver is advised to read all sec-  
tions in the Owner's Manual about this  
function to learn of its limitations,  
which the driver must be aware of  
before using the function.  
If, at a speed below 30 km/h (20 mph), the  
function detects that the vehicle is in danger  
of being hit from behind, the seat belt tension-  
ers may tension the front seat belts. The  
Whiplash Protection System will also be acti-  
vated in a collision.  
the vehicle approaching from the rear  
changes lanes at a late stage  
a trailer, bicycle holder or similar is con-  
nected to the vehicle's electrical system -  
the function will then be automatically  
deactivated.  
Driver support functions are not a sub-  
stitute for the driver's attention and  
judgment. The driver is always respon-  
sible for ensuring the vehicle is driven  
in a safe manner, at the appropriate  
speed, with an appropriate distance to  
other vehicles, and in accordance with  
current traffic rules and regulations.  
Immediately before a collision from behind,  
the function may also activate the brakes in  
order to reduce the forward acceleration of the  
vehicle during the collision. However, the  
brakes will only be applied if your vehicle is  
stationary. The brakes will be immediately  
released if the accelerator pedal is depressed.  
NOTE  
In certain markets RCW does not warn  
with the direction indicators due to local  
traffic regulations – in such cases, that part  
of the function is deactivated.  
The function is automatically activated each  
time the engine is started.  
Related information  
Driver support systems (p. 270)  
Rear Collision Warning* limitations  
(p. 330)  
Whiplash Protection System (p. 46)  
62  
Warning of collision from the rear.  
This function is not available on all markets.  
Warning of collision from the rear.  
63  
64  
330  
* Option/accessory.  
DRIVER SUPPORT  
BLIS*  
NOTE  
The BLIS65 function is designed to help pro-  
vide assistance in heavy traffic with several  
lanes moving in the same direction by helping  
the driver to detect the presence of vehicles  
in the "blind spot" area behind and to the side  
of the vehicle.  
The warning with direction indicators for  
Rear Collision Warning* is deactivated if  
the collision warning distance in the City  
Safety function is set to the lowest level  
"Late".  
The seat belt tensioning and braking func-  
tions remain active.  
NOTE  
BLIS overview  
The function uses the vehicle's camera and  
radar sensor, which has certain general  
limitations.  
Blind spot zone  
Rapidly approaching vehicle zone.  
The system is designed to react to:  
Related information  
Rear Collision Warning* (p. 330)  
vehicles passing your vehicle  
Setting a warning distance for City Safety  
(p. 319)  
vehicles that are rapidly approaching your  
vehicle from behind.  
Location of BLIS indicator light.  
BLIS is a driver support system designed to  
alert the driver of:  
Camera/radar sensor limitations (p. 311)  
When BLIS detects a vehicle in zone 1 or a  
rapidly approaching vehicle in zone 2, an indi-  
cator light will illuminate in the relevant rear-  
view mirror and glow steadily. If the driver  
then uses the turn signal on the side in which  
the warning has been given, the indicator light  
will become brighter and begin flashing.  
vehicles in your "blind spot"  
vehicles approaching rapidly in adjacent  
lanes.  
BLIS is active when your vehicle is traveling at  
a speed over 10 km/h (6 mph).  
65  
Blind Spot Information  
}}  
* Option/accessory. 331  

Related Topics

Popular Owner Manuals