LIGHTING
||
Using home safe lighting
Approach light duration
NOTE
Some of the exterior lighting can be kept
switched on to work as home safe lighting
after the car has been locked.
Approach lighting is switched on when the
car is unlocked and is used to switch on the
car's lighting at a distance.
Regulations for the use of hazard warning
flashers may vary between countries.
To activate the function:
The function is activated when the remote
control key is used for unlocking. In daylight,
position lamps, interior roof lamps, floor lights
and cargo area lighting are activated. In weak
daylight or darkness, number plate lighting
and lighting in the outer handles are also acti-
vated* with their light source aimed towards
the ground.
Related information
1. Switch off the car.
Emergency brake lights (p. 147)
•
2. Move the left-hand stalk switch forward
toward the instrument panel and release.
Using direction indicators (p. 144)
•
3. Get out of the car and lock the door.
> A symbol in the driver display is illumi-
nated to indicate that the function is
activated and outer lighting is switched
on: Position lamps, headlamp beams,
number plate lighting and lighting in
outer handles*.
The lighting stays on for approx. 2 minutes if
no doors are opened. If a door is opened
within the activation time, the time for the
interior lighting and lighting in the outer han-
dles* will be extended.
The length of time that home safe lighting
remains on can be set via the centre display.
The function can be activated and deactivated
via the centre display.
Related information
Related information
Adjusting light functions via the centre
display (p. 139)
•
Adjusting light functions via the centre
display (p. 139)
•
Approach light duration (p. 148)
•
Using home safe lighting (p. 148)
Remote control key (p. 222)
•
•
148
* Option/accessory.
English 
