08 Starting and driving
Parking brake – symbols and
messages
A text message can be erased by pressing
briefly on the OK button on the turn signal
lever.
Symbol and messages in the instrument panel
Symbol Message
Description/action
"Message"
Read the message in the information display
A flashing symbol indicates that the parking brake is being applied. If the symbol flashes in any other situation
then this means that a fault has arisen. Read the message on the information display.
-
-
-
Park brake not
fully released
A fault is preventing the parking brake from being released. Try to apply the parking brake and release it sev-
eral times. If the problem persists, contact an authorized Volvo workshop. If you drive off with this error mes-
sage showing, a warning signal sounds.
Parking brake not A fault is preventing the parking brake from being applied. Try to apply the parking brake and release it several
times. If the problem persists, contact an authorized Volvo workshop. If you drive off with this error message
showing, a warning signal sounds.
applied
Parking brake
A fault has occurred. Try to apply and release. Contact a Volvo workshop if the fault remains
Service required
Related information
•
WARNING
Parking brake – general information
(p. 269)
If the vehicle must be parked before the
fault has been corrected, always put the
gear selector in P and turn the wheels so
that they point away from the curb if the
vehicle is pointing uphill or toward the curb
if it is pointing downhill.
Parking brake – applying (p. 270)
Parking brake – releasing (p. 271)
Brakes – general (p. 266)
•
•
•
08
272
English 
