1997-2007 Volvo Xc70 SUV Interior -> Rear seat and cargo area User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Interior -> Rear seat and cargo area for Your Volvo Xc70 SUV First Generation (1997-2007)

75
8503022m
Centre seat head restraint
(V70)
Lower the centre seat head restraint if it is
raised. Press the release button behind the right-
hand support. See illustration.
Rear seat and cargo area
Centre seat head restraint
(XC70)
(Models with 3-portion rear seat)
Raise: Pull the head restraint straight up.
Lower: Pull the head restraint slightly forward
and press down.
8503344m
Folding the head restraints
Extension of cargo area
The rear seat is in two sections and each section
can be folded forward separately.
1. Tip the front seat backrests into a more
upright position if they are excessively
reclined.
2. Pull the strap on the seat cushion and fold
the cushion towards the front seat backrest.
3. Fold the outboard head restraints forward
by pulling the head restraint strap.
8503021m
76
B
A
8503020m
Tipping the backrest forwards
Press the backrest catch to the rear and tip the
backrest forwards.
Folding the centre portion of
the backrest (XC70)
(Models with 3-portion rear seat)
The left-hand and centre portions of the backrest
can be folded individually.
The centre portion must be folded to fold the
right-hand portion.
A - Catch in closed position
B - Catch in open position
Rear seat and cargo area
8503341m
WARNING!
Make sure the backrest locks into place
when returning it to an upright position.
The word “UNLOCKED” should not be
visible on the catch.
To fold the centre portion of the backrest
(without folding the outer portions): Make sure
the head restraint is completely lowered. Press
the button on the top edge of this portion of the
backrest to release the catch. Then fold the
backrest forward.
Centre seat backrest
(XC70 with 3-portion rear seat)
Divider with storage pockets
(XC70 – accessory)
(Models with 3-portion rear seat)
A divider with storage pockets is available as an
accessory to the XC70 with a 3-portion rear seat.
The divider can prevent objects in the cargo area
from being thrown forward during hard braking.
To fit the divider, see the accompanying
directions in the kit or contact a Volvo workshop.
8902058m
77
Rear seat and cargo area
WARNING!
(XC70 with 3-portion rear seat)
· For reasons of safety, the centre seat
backrest should never be left loose in
the car.
· If the centre seat backrest is removed,
hard braking may cause unsecured
objects in the cargo area to be thrown
forward between the outer backrests.
· The right-hand side of the backrest must
be upright when the centre seat backrest
is folded into place. Otherwise, the centre
seat backrest cannot lock into place and
the centre seatbelt cannot be used.
8503317m
Centre seat backrest as armrest
Removing the centre seat
backrest (XC70)
(Models with 3-portion rear seat)
· Press the button on the top edge of this
portion of the backrest to release the catch.
· Fold the backrest slightly forward.
· Pull the handle on the back or the backrest
(see above illustration) to release the lower
portion of the backrest from the rod. Lift
out the backrest.
Contact your Volvo dealer for information on
accessories that can be placed between the outer
portions of the backrest.
8503343m
Centre armrest (XC70)
(Models with 3-portion rear seat)
The centre seat backrest can be used as an
armrest.
· Remove the centre seat backrest as
described to the left.
Refitting the centre seat
backrest
(Models with 3-portion rear seat)
· The right-hand portion of the backrest must
be upright when refitting the centre portion.
· Refit the backrest by pressing the lower
portion onto the rod until it locks into place.
Contact your Volvo dealer for information on
accessories that can be placed between the outer
portions of the backrest and seat cushion.
· Turn the backrest over (the front of the
backrest should be up)
· Press the backrest back onto the rod until it
locks into place.
To reset the backrest to its normal position, pull
the handle (which is now on the bottom of the
front) to release it from the rod. Refit the
backrest following the directions to the left.
WARNING!
If the centre seat backrest is used as an armrest
(see previous page) then the divider must be
positioned to prevent objects in the cargo area
from being thrown forward between the outer
backrests during hard braking.
78
Rear seat and cargo area
8503150m
A - Catch in closed position
B - Catch in open position
Rear seat backrest position
You can adjust the positions of the two rear
seat backrests. To adjust a backrest to the cargo
position*:
· Press the catch until the red mark is visible.
· Pull the backrest forwards to a new locked
position.
· Make sure that the backrest is secured in a
locked position and that the red mark is no
longer visible.
Follow the same procedure to adjust the
backrest to an upright position.
* The cargo position increases the cargo area.
B
A
8503125m
NOTE! Make sure that the holes in the plastic
ferrules on the top of the backrest engage with
the hooks on the bottom of the seat cushion.
When you later raise the backrest and seat
cushion, the head restraints must be returned to
their normal positions.
WARNING!
Do not position heavy items right up against the front seats. The forward-folded backrest will
then be pressed down unnecessarily hard. Never load above the level of the backrests. If you do,
the cargo could be thrown forward during heavy braking or in a collision and seriously injure you
or your passengers. Also remember to secure the cargo properly to prevent it moving about.
Removing the seat cushion
(2 or 3 portion rear seat)
The seat cushion can easily be removed. You
will then have a somewhat longer cargo
compartment.
Pull the red lock pins forward to unlock the seat
cushion. Then lift the seat cushion.
Do this in the reverse order when replacing the
seat cushion.
8501274A

Related Topics

Popular Owner Manuals