06 Locks and alarm
Keyless drive*
NOTE
NOTE
Cars equipped with Keyless Drive have a star-
ting and locking system that can be operated
keylessly.
Turn the remote control key over with the
buttons facing up, this is to avoid the bat-
teries falling out when it is opened.
Volvo recommends that the batteries to be
used in the remote control key/PCC fulfil
UN Manual of Test and Criteria, Part III,
sub-section 38.3. Batteries fitted in the
factory or replaced by an authorised Volvo
workshop fulfil the above criteria.
With the keyless start and lock system the car
can be started, locked and unlocked without
the remote control key (p. 168)6 inserted in
the ignition switch. It is enough to have the
remote control key with you in a pocket. The
system makes it easier and more convenient
to e.g. open the car when your hands are full.
IMPORTANT
Avoid touching new batteries and their
contact surfaces with your fingers as this
may impair their function.
Assembly
1. Press the remote control key together.
2. Hold the remote control key with the slot
pointed up and lower the key blade into
its slot.
Battery replacement
Both of the remote control keys included with
the car have keyless functionality. It is possi-
ble to order more remote control keys.
Closely study how the battery/batteries
are secured on the inside of the cover,
with regard to their (+) and (–) sides.
3. Lightly press the key blade. You should
hear a "click" when the key blade is
locked in.
The car's electrical system can be set to
three different levels - key position 0, I and II
(p. 84) - with the remote control key.
Remote control key (one battery)
1. Carefully prize out the battery.
IMPORTANT
2. Install a new one with the (+) side down.
Related information
•
Make sure that exhausted batteries are
disposed of in a manner which is kind to
the environment.
Remote control key with PCC* (two
batteries)
1. Carefully prize out the batteries.
Keyless Drive* - remote control key range
(p. 180)
06
Keyless drive* - secure handling of the
remote control key (p. 180)
•
2. First install one new one with the (+) side
up.
Related information
Remote control key (p. 168)
Keyless Drive* - interference to remote
control key function (p. 181)
•
•
•
3. Position the white plastic tab in between
and finally install a second new battery
with the (+) side down.
Remote control key - functions (p. 172)
Battery type
Use batteries with the designation
CR2430, 3V - one in the remote control key,
two in the remote control key with PCC.
179
* Option/accessory, for more information, see Introduction.
English 
