06 Locks and alarm
Remote control key - personalisation*
Storing settings
WARNING
Proceed as follows in order to store the set-
tings and use the key memory in the remote
control key:
The key memory in the remote control key
(p. 168) means that certain settings in the car
can be individually adapted for different peo-
ple.
Risk of crushing! Make sure that children
do not play with the controls. Check that
there are no objects in front of, behind or
under the seat during adjustment. Make
sure that none of the passengers in the
rear seat is in danger of becoming trap-
ped.
1. Unlock the car with the remote control
key in whose memory the setting2 shall
be stored.
The key memory function is available in com-
bination with, for example, power* driver's
seat.
2. Make sure that the key memory function
is activated in the menu system MY CAR.
Settings for door mirrors (p. 111), driver's
seat, steering force (p. 196) and the com-
bined instrument panel's theme, contrast and
colour mode (p. 69) can be stored in the
memory, depending on the car's equipment
level.
Changing settings
3. Make the desired settings for e.g. the
seat and the door mirrors.
If several people each with a remote control
key approach the car, then the settings for
e.g. seat and door mirrors are implemented
for the person whose remote control key
unlocks the driver's door.
4. The settings are stored in the current
remote control key's memory.
The next time the car is unlocked with the
same remote control key, the positions that
are stored in the key memory will be set auto-
matically - providing that they have been
changed since the last time the current
remote control key was used.
The function1 can be activated/deactivated in
the menu system MY CAR. For a description
of the menu system, see MY CAR (p. 119).
If the driver's door has been opened by
person A with remote control key A, but
person B with remote control key B shall
drive, then the settings can be changed as
follows:
When the function is activated, the settings
are automatically linked to the key memory.
This means that a change in a setting will
automatically be saved to the specific remote
control key's memory.
Emergency stop
Standing by the driver's door, or sitting
•
06
If the seat accidentally begins to move, press
one of the setting buttons for the seat or
memory buttons in order to stop the seat.
behind the steering wheel, person B
presses the button for unlocking on
his/her remote control key, see Remote
control key - functions (p. 172).
Restarting to reach the seat position stored in
the key memory is performed by pressing the
unlock button on the remote control key. The
driver's door must then be open.
Select one of three possible memories for
seat adjustment with seat button 1-3, see
•
1
Called Car key memory in MY CAR.
This setting does not affect settings that have been stored in the power seat's memory function.
2
}}
169
* Option/accessory, for more information, see Introduction.
English 
