05 Infotainment system
General infotainment functions
05
230
* Option/accessory, for more information, see Introduction.
•
Surround
1
- Can be set to the On/Off posi-
tion. When On is selected, the system
selects the setting for optimal sound repro-
duction. Normally DPLII and
then
appear in the TV screen. If the recording is
made with Dolby Digital technology then
playback will take place with this setting,
then appears in the TV screen.
When Off is selected, 3-channel stereo is
available.
•
Bass - Bass level.
•
Treble - Treble level.
•
Fader – Balance between the front and
rear speakers.
•
Balance – Balance between the left and
right-hand speakers.
•
Subwoofer*
1
- Bass speaker level.
•
DPL II center level3 channel center
level
1
- Volume for centre speaker.
•
DPL II surround level
1, 2
– Level for sur-
round.
Advanced audio settings
Equalizer
3
The volume level can be adjusted separately
for different wavelengths.
1.
Press OK/MENU to access
Audio
settings
and select Equalizer.
2.
Select wavelength by turning TUNE and
confirm with OK/MENU.
3.
Adjust the volume level by turning TUNE
and confirm with OK/MENU. Continue in
the same way with other wavelengths.
4. When you are finished with the settings,
turn TUNE
OK and confirm by pressing
OK/MENU or EXIT.
For general information on menu navigation
and menu structures, see page 275.
Sound stage
1
The sound experience can be optimised for the
driver's seat, both front seats or the rear seat.
If there are passengers in both the front and
rear seats then the option recommended is;
both front seats. The options can be selected
under
Audio settings Sound stage.
For general information on menu navigation
and menu structures, see page 275.
Audio volume and automatic volume
control
The audio system compensates for disrupting
noises in the passenger compartment by
increasing the volume in relation to the speed
of the car. The compensation level can be set
to low, medium, high or off. Select the level
under
Audio settings Volume
compensation
.
For general information on menu navigation
and menu structures, see page 275.
External audio source audio volume
If an external audio source (e.g. an MP3 player
or iPod
) is connected to the AUX input then
the audio source that is connected can have a
different volume than the audio system's inter-
nal volume (e.g. radio). Correct this by adjust-
ing the volume of the input:
1.
Press the MEDIA button and turn TUNE to
AUX and wait a few seconds or press OK/
MENU.
1
Only Premium Sound Multimedia.
2
Only when Surround is activated.
3
Not Performance.
English 
