1.7 Raising the vehicle with a jack
Warning note
–
–
–
Ensure that the jack’s screw thread is adequately
lubricated before use.
If possible, the socket should be used on level, solid
ground.
Turn off the ignition and fully apply the
electromechanical parking brake before raising the
vehicle.
–
–
–
The jack supplied with this vehicle is for changing
wheels only.
Use the jack only when changing a wheel in an
emergency.
See the owner's manual for the procedure and jacking
points on all vehicle versions.
Practical note
When converting the vehicle, make sure that access to the
spare wheel is not blocked. Ensure that sufficient clearance
remains for successful lowering and raising of the spare
wheel. Failure to comply with this requirement may result in
damage to the winch mechanism and unsafe position of the
spare wheel.
Information
–
When using the vehicle jack, read the operating
manual for information on proper use.
The spare wheel winch is located above the spare
wheel and is accessible from the rear of the chassis
frame.
–
–
The jack must be mounted and secured to the vehicle
appropriately to ensure safety, durability, and
accessibility.
Volkswagen Commercial Vehicles – Body builder guidelines – February 2023 edition
The new Amarok – Page 28 of 166
English 
