2017-2024 Volkswagen Arteon 4 Door Parking and maneuvering User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Parking and maneuvering for Your Volkswagen Arteon 4 Door First Generation (2017-2024)

Parking and maneuvering  
Parking the vehicle  
Parking  
WARNING  
Parking the vehicle incorrectly can result in the vehicle rolling, even on slight downhill slopes. This can cause accidents and serious injuries.  
When parking, always follow the steps in the specified order.  
Before exiting the vehicle, make sure the electronic parking brake is activated and the red warning light  
Cockpit display once the ignition has been switched off.  
comes on in the Volkswagen Digital  
1. Press and hold the brake pedal.  
2. In vehicles with an automatic transmission, move the selector lever into the P position.  
3. Set the electronic parking brake.  
4. On uphill and downhill slopes, turn the steering wheel so that the vehicle will roll into a curb if it begins moving.  
5. Stop the engine and switch the ignition off.  
The red  
indicator light in the instrument cluster display will turn on.  
6. Release the brake.  
7. Exit the vehicle ⇒  
. Pay attention to other road users.  
8. Take all vehicle keys with you and lock the vehicle.  
WARNING  
If children, people requiring assistance or animals are left unattended in the vehicle, there is a risk of accidents and serious injuries.  
Never leave children, people requiring assistance or animals unattended in the vehicle. They could move the selector lever, switching off the electronic  
parking brake. The vehicle could move.  
Never leave children, people requiring assistance or animals in the vehicle. Depending on the season, the temperature inside the vehicle could become  
very high or low.  
Always take all vehicle keys with you when leaving the vehicle.  
To avoid damage and dangerous situations, always park the vehicle in a suitable parking area  
⇒
.
NOTICE  
Any unevenness in the ground, as well as sand and mud may mean that the vehicle cannot be parked safely and may be damaged.  
Always park the vehicle on solid and level ground.  
NOTICE  
Vehicle components that are low to the ground such as the bumpers, spoilers, and parts of the suspension could be damaged when driving over objects  
protruding up from the ground.  
Drive carefully over driveways, ramps, curbs and fixed barriers, as well as when driving through dips.  
Electronic parking brake  
171  
Fig. 119 In the center console: button for the electronic parking brake.  
Switching on  
1. When the vehicle is stationary, pull and hold the button for the electronic parking brake fig. 119  
.
The yellow indicator light in the  
button comes on.  
If the electronic parking brake is switched on, the red indicator light comes on in the instrument cluster.  
Switching off  
1. Switch the ignition on.  
2. Press the brake pedal and press the  
button.  
Or: when the engine is running, press the accelerator pedal lightly without pressing the brake pedal.  
The indicator light in the button and the red warning light in the Volkswagen Digital Cockpit will turn off.  
Automatic switch-on if you leave the vehicle incorrectly  
In vehicles with an automatic transmission or DSG® automated transmission, if the system detects that the vehicle was exited incorrectly, it can switch on the  
electronic parking brake automatically ⇒  
.
WARNING  
Exiting the vehicle incorrectly can result in the vehicle rolling. This can cause accidents, serious injuries, and property damage.  
Always follow the specified steps in the correct order when parking the vehicle.  
Before exiting the vehicle, make sure the electronic parking brake is activated and the red  
comes on after switching off the ignition.  
warning light in the Volkswagen Digital Cockpit display  
Automatic switch-off when starting to drive  
The parking brake releases automatically as you drive off if one of the following situations occurs when the driver's door is closed  
Automatic transmission: A gear is engaged or changed.  
⇒
:
Starting to drive on steep inclines or with increased vehicle weight  
You can prevent the electronic parking brake from releasing automatically if you pull the  
switch upward and hold it up while starting to drive.  
switch is released.  
If more engine power is required when starting to drive, the electronic parking brake will release only after the  
This can make it easier to start driving when towing a heavy load.  
Emergency braking function  
Only use the emergency braking function in an emergency, if the vehicle cannot be stopped using the brake pedal  
⇒
.
1. Pull and hold the  
switch.  
The vehicle will brake abruptly. A warning chime will also sound at the same time.  
WARNING  
Using the electronic parking brake incorrectly can cause accidents and serious injuries.  
Always use the brake pedal to brake the vehicle and never the electronic parking brake unless it is an emergency. The braking distance will be  
significantly longer because only the rear wheels will be braked under certain circumstances.  
Do not press the accelerator pedal when the engine is running and a gear is engaged if the vehicle is to be brought to a standstill. The parking break may  
172  
release and the vehicle could start to move.  
Noises can be heard when the electronic parking brake is operated or checked after a longer period.  
Troubleshooting  
Holding force in the current situation is too low  
The red warning light  
is blinking.  
It is not possible to park the vehicle safely.  
1. Park the vehicle in another location or on a flat surface.  
/
Electronic parking brake malfunction  
The yellow central warning light comes on. The  
symbol with a message is additionally shown in the instrument cluster display.  
1. Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized Volkswagen dealer or  
authorized Volkswagen Service Facility.  
The electronic parking brake does not switch off  
The requirements for switching off the electronic parking brake are not met ⇒ Electronic parking brake.  
The 12 V vehicle battery is drained ⇒ Preparing and Performing a Jump-start.  
Auto Hold  
Fig. 120 In the center console: Auto Hold button (general example).  
Auto Hold secures the vehicle from  
rolling away when it is stationary,  
without having to hold the vehicle with  
the brake pedal.  
Depending on the vehicle equipment, your vehicle may feature the Auto Hold function.  
Requirements  
The driver door must be closed.  
The engine must be stopped.  
Auto Hold does not switch on or it switches off automatically if you shift into the N position. As a result, the vehicle will not be secured from rolling away  
⇒
.
Switching on  
1. Press the  
button fig. 120.  
The yellow indicator light in the  
button turns on.  
Auto Hold is ready to use, but the vehicle may not be kept stationary ⇒  
Auto Hold remains switched on after the ignition is turned on again.  
Keeping the vehicle stationary using Auto Hold  
.
1. When Auto Hold is switched on, bring the vehicle to a stop using the brakes.  
2. Release the brake pedal.  
The vehicle is kept stationary.  
173  
The hold on the vehicle will end when the vehicle starts to drive or the requirements for Auto Hold are not met.  
Switching off  
1. Press the  
button.  
The indicator light in the  
fig. 120 button turns off.  
The electronic parking brake switches on automatically to keep the vehicle stationary.  
However, if you press the brake pedal when switching off Auto Hold, the electronic parking brake will not switch on  
⇒
.
Temporary switch-off with the  
button  
It may be necessary to switch off Auto Hold temporarily, for example when maneuvering the vehicle to make it easier for the vehicle to roll.  
1. With the engine running, press the brake pedal.  
2. Press the  
button.  
Auto Hold is switched off.  
Auto Hold will switch on again once the brake pedal is pressed while the vehicle is stationary.  
WARNING  
The intelligent technology of Auto Hold cannot overcome the natural laws of physics and it can only operate within the limits of the system. Do not allow the  
increased convenience provided by Auto Hold to tempt you into taking risks.  
Make sure the indicator light for the electronic parking brake in the instrument cluster display lights up if the vehicle is to be kept stationary.  
Never exit the vehicle when the engine is running and Auto Hold is switched on.  
In some situations, such as when the ground is slippery or icy, Auto Hold will not be able to keep the vehicle stationary on hills or brake it adequately  
when going downhill.  
NOTICE  
Damage can result if the electronic parking brake switches on automatically in a car wash.  
Always switch off Auto Hold before going through a car wash.  
Information about the parking systems  
Safety instructions  
WARNING  
The intelligent technology of the Park Distance Control (PDC) cannot overcome the natural laws of physics and it can only operate within the limits of the  
system. Do not allow the increased convenience provided by the parking systems to tempt you into taking risks. The parking systems cannot replace the driver's  
attention.  
Always adapt your speed and driving style to the visibility, weather, road and traffic conditions.  
Always keep an eye on the parking direction and the vehicle surroundings. Pay particular attention to small children, animals and objects.  
Bear in mind that the parking system may not be able to react if the vehicle approaches too quickly and no warning is issued.  
Do not allow the parking system's display to distract you from the traffic around you.  
WARNING  
Camera lenses enlarge and distort the field of vision. Using the camera image to estimate the distance to people or obstacles may not be precise and can cause  
accidents and serious injuries.  
Do not rely on the camera system image.  
NOTICE  
In parking spaces without a curb, park at least 20 inches (50 cm) away from walls and buildings to reduce the risk of vehicle damage.  
Sensor and camera boundaries  
Various sensors and cameras that detect the vehicle surroundings ultrasonically, by radar waves, and visually are located on and in the vehicle. The various parking  
systems use different combinations of sensors. All sensors have technical and physical limits ⇒  
:
174  
In some situations, some objects may not be detected, e.g. trailer draw bars, narrow poles, fences, posts, and trees, extremely low or high obstacles, or trunk  
lids that are opening or already open ⇒  
.
The parking system coverage areas have “blind” spots in their range where they cannot detect people and objects.  
Dirt, ice, or water on the sensors and cameras may be detected as obstacles or prevent the detection of objects in some cases. In addition to dirt and snow,  
soap residue or other coatings can also impair the sensor range → page , Exterior care and cleaning.  
External noises and certain surfaces on objects and clothing can affect the sensor signals. In some situations, people and objects may not be detected or may  
be detected incorrectly.  
Certain objects, such as small posts or grating, cannot be shown or cannot be adequately shown due to the resolution of the screen and if there is insufficient  
lighting.  
The cameras only show two-dimensional images on the screen. Due to the lack of depth of field, it may be difficult or impossible to identify protruding objects o  
recesses in the road.  
Volkswagen recommends practicing with the parking systems in a location or parking space with no traffic in order to become acquainted with the functions.  
Requirements  
The use of parking systems, e.g. with camera assistance, may not be allowed in some regions according to legal provisions.  
Use the parking systems only where permitted by legal provisions.  
General information  
So that the sensors and cameras can detect the area surrounding the vehicle as well as possible and display this image on the Infotainment system screen, the  
following requirements must be met.  
The doors and trunk lid are closed.  
The outside mirrors must not be folded in.  
The sensors or cameras are not covered by attachments or decorative license plate frames. The decorative number plate frame and the number plate itself  
must not protrude at the sides or bottom.  
The vehicle must be on level ground.  
The vehicle must not be loaded primarily in the rear or on one side.  
Engine is running.  
Braking assistance systems such as ESC or ASR are switched on.  
If you use any other functions in the Infotainment system while you are parking, the parking function and its warning chimes will be deactivated.  
Finding a suitable parking space  
The length and width of the parking space must be larger than the vehicle measurements and provide enough space to maneuver.  
The distance when driving past the parking space is approx. 1 m (approx. 3 feet).  
Vehicles with Park Assist: The speed when passing the parking space is, for parking spaces parallel to the road, maximum approx. 40 km/h (approx.  
25 mph), and for parking spaces across the road maximum approx. 20 km/h (approx. 12 mph).  
Automatic braking intervention  
A parking system's automatic braking  
support helps to avoid collisions, if an  
obstacle is detected.  
Parking systems with braking support  
Depending on the vehicle equipment, the vehicle has parking systems with a maneuvering and/or emergency braking function  
⇒
.
WARNING  
The increased comfort offered by the parking system automatic braking intervention should not cause you to take safety risks. In some situations, function of the  
automatic braking intervention may be limited or it may not function at all. Collisions with obstacles can lead to injuries and vehicle damage. The system cannot  
replace the driver's attention.  
Stay attentive and do not rely only on the parking systems.  
Always be ready to take over braking and steering.  
Do not take any risks when it comes to safety.  
React to the warnings and recommendations from the parking systems.  
175  
Requirements  
When maneuvering, the vehicle is not driving faster than approx. 10 km/h (approx. 6 mph).  
A parking system has been switched on.  
What happens during an automatic braking intervention?  
If there is an obstacle, the vehicle brakes to a stop and is kept stationary for around two seconds.  
1. After braking, press the brake pedal to keep the vehicle stationary.  
2. Check your surroundings.  
Park Assist: If the speed is too high, the vehicle will brake to a stop. The parking process can then be resumed.  
Depending on the vehicle equipment, there may be a message on the instrument cluster display.  
Switching on and off  
Automatic braking is activated or deactivated when a parking system is switched on or off by the driver.  
1. Or: Tap the  
function key in the screen display of the parking system.  
Maneuver braking for Park Distance Control  
1. Briefly press the accelerator pedal to cancel the automatic braking support ⇒  
.
If there is an obstacle in the front area of the vehicle, automatic braking support will not happen if Park Distance Control was activated automatically while  
driving forward ⇒ Switching Park Distance Control (PDC) on and off.  
Driving with a trailer  
If a trailer is connected electrically, the automatic braking support in the rear area is deactivated.  
If the trailer hitch was not installed at the factory, the parking system must be manually deactivated when towing a trailer.  
General information  
Switch the parking system off if automatic braking support happens too frequently, like when driving off-road.  
If the maneuver braking function for Park Distance Control intervenes to stop the vehicle, the function will be inactive for a distance of approx. 5 m (approx.  
16 ft) when driving in the same direction. It will become active again if the gear or selector lever position changes.  
The parking process is canceled following Park Assist emergency braking due to an obstacle.  
Following a Rear Traffic Alert emergency braking intervention, it will take approx. 10 seconds before automatic braking support can occur again.  
Troubleshooting  
The parking system is functioning differently than expected  
The system conditions are not met ⇒ Requirements.  
The sensors or camera may be dirty or covered with ice ⇒ Exterior care and cleaning.  
The camera lens is dirty and the camera image is not clear ⇒ Exterior care and cleaning.  
Sources of noise, such as a jackhammer or driving over cobblestones, can interfere with the ultrasonic signal.  
The vehicle is damaged in the area of the sensors or camera, for example from parking barriers, or the paint may have been changed or other structural  
modifications may have been made near the sensors or camera, for example to the vehicle front end or to the suspension.  
The areas detected by the sensors or camera may be blocked by accessories such as bicycle racks.  
Fault displays  
1. Note any messages on the instrument cluster display and in the Infotainment system.  
NOTICE  
Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility in the event of a parking system malfunction. Volkswagen recommends  
contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
No sensor or camera view or the parking system has been switched off  
If a sensor malfunctions, the sensor area is deactivated. The sensor area affected can be displayed in the Infotainment system by the  
may be completely switched off.  
symbol. The parking syste  
If Park Distance Control is malfunctioning, a continuous tone will sound for several seconds when you switch it on. Where applicable, a message will appear in the  
instrument cluster display.  
1. Check if one of the causes listed is responsible.  
2. Once the source of the issue has been resolved, switch the system on again.  
176  
3. If the problem persists, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized  
Volkswagen dealer or authorized Volkswagen Service Facility.  
The Park Assist is canceled automatically  
Park Assist will end the parking process if one of the following situations occurs:  
The  
function key is pressed.  
The driver takes over steering.  
The driver’s door is opened.  
The time limit or number of movements for the parking process is exceeded.  
ASR is switched off or it engages.  
There is a system malfunction.  
1. Restart the parking process.  
Park Assist is active and supports steering movements when the vehicle is stationary  
If Park Assist attempts to turn the steering while the vehicle is stationary, the white  
1. Press the brake pedal.  
symbol appears in the instrument cluster display.  
After a wheel change, Park Assist parks inaccurately  
If, after a wheel change, Park Assist parks inaccurately, e.g. with an increased or reduced distance from the curb, the system may have to acquire the wheel sizes  
again.  
1. Drive the vehicle over a longer distance, including around bends.  
The Park Assist system automatically learns the new wheel sizes.  
Park Distance Control (PDC)  
Introduction  
Park Distance Control assists the driver  
when parking and warns if there are  
obstacles.  
Fig. 121 Infotainment system: Display of Park Distance Control (general example).  
Obstacle detection.  
Steering lock.  
System function  
Using ultrasound sensors, the Park Distance Control detects the distance of the vehicle from an obstacle.  
The Park Distance Control warns you of a collision via colored segments on the screen of the Infotainment system and via warning chimes fig. 121, ⇒  
.
If the driver does not respond to an approaching obstacle, automatic braking support may intervene (depending on the vehicle equipment)  
⇒
.
WARNING  
The intelligent technology of the Park Distance Control (PDC) cannot overcome the natural laws of physics and it can only operate within the limits of the  
system. Not paying attention can result in accidents, serious injuries and vehicle damage.  
The PDC cannot replace the driver's attention.  
177  
NOTICE  
The collision area has been reached, at the latest, when the penultimate segment is displayed or a continuous warning tone sounds.  
Brake the vehicle in good time before reaching an obstacle.  
NOTICE  
Depending on the vehicle equipment, distances to obstacles in the side areas are also displayed. In order to fully scan and display the side areas, you must  
move the vehicle a few yards forward or back. Any obstacles that enter these areas from the outside are not displayed.  
Screen display  
Red section of the image: Nearby obstacle. The vehicle is at risk. Apply the brakes.  
Yellow section of the image: Obstacle in the path of the vehicle.  
The vehicle is at risk. Steer around the obstacle.  
on and off (depending on the vehicle equipment).  
equipment). The colors may vary.  
White or gray section of the image: Obstacle outside of the vehicle's path. Switch maneuver braking  
Mute the warning chimes. There is a system malfunction in the area that is detected (depending on vehicle  
NOTICE  
The system will only provide visual and audible warnings for obstacles within the vehicle's path.  
Park Distance Control settings  
Depending on the vehicle equipment, settings for the Park Distance Control can be adjusted in the vehicle settings in the Infotainment system ⇒ Vehicle settings  
menu.  
Special considerations when towing a trailer  
If a trailer electrical system is connected, the rear sensors of the Park Distance Control are not switched on:  
You are not warned about obstacles.  
The maneuver braking is also deactivated automatically.  
Switching Park Distance Control (PDC) on and off  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Safety instructions.  
Fig. 122 In the center console: Park Distance Control button.  
Switching on  
1. Select the reverse gear.  
Or: Press the  
Or: Press the  
button fig. 122.  
button.  
Or: The vehicle will roll backward.  
Switching off  
178  
1. Press the  
button fig. 122.  
Or: Press the  
button.  
Or: engage the P selector lever position.  
Or: the vehicle is driving forward at more than approx. 10 km/h (approx. 6 mph) up to approx. 15 km/h (approx. 9 mph).  
Automatic activation when driving forward  
If the vehicle slowly approaches an obstacle, Park Distance Control is automatically activated.  
1. Switch the function on or off in the Infotainment system vehicle settings ⇒ Vehicle settings menu.  
If the driver switches off Park Distance Control, no further automatic activation occurs.  
Automatic activation is available again under following conditions:  
The vehicle has been accelerated to more than approx. 15 km/h (approx. 9 mph) and then the speed has fallen below this again.  
Or: the ignition has been switched off and on again.  
Or: parking lock P has been changed to a gear.  
If an obstacle is detected in front of the vehicle, the display in the Infotainment system is activated. If the vehicle approaches further, warning chimes also  
sound.  
Rear View Camera (Rear View)  
Introduction  
The Rear View Camera system in the  
rear of the vehicle makes it easier for  
the driver to see behind the vehicle and  
assists when parking.  
System function  
The Rear View Camera system shows the area behind the vehicle on the Infotainment system screen. Depending on the mode and vehicle equipment, orientation  
lines may assist in the view toward the rear ⇒  
.
WARNING  
The intelligent technology of the Park Distance Control (PDC) cannot overcome the natural laws of physics and it can only operate within the limits of the  
system. Not paying attention can result in accidents, serious injuries and vehicle damage.  
The PDC cannot replace the driver's attention.  
Brake the vehicle in good time before reaching an obstacle.  
The orientation lines superimposed on the camera image are shown by the system regardless of the vehicle's surroundings. There is no automatic obstacle  
detection by the camera while it is active. The driver must evaluate whether the vehicle will fit in the parking space.  
If a trailer is connected to the factory-installed trailer hitch, all orientation lines for the rear area are hidden in the camera image.  
If a camera is installed in the trunk lid, the orientation lines are also hidden if the trunk lid is open.  
USA and Canada: If the camera image on a parking system has been switched on by engaging the reverse gear, no function keys are displayed for safety reasons.  
These function keys can be displayed again by tapping the function key  
.
CAUTION  
Vehicles with a swiveling emblem: The Rear View Camera system extending can cause serious injuries due to entrapment.  
When engaging reverse gear, make sure that there are no persons directly behind the vehicle and that nobody can intervene in the range of operation of  
the Volkswagen emblem on the trunk lid.  
Switching the Rear View Camera system on and off  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Safety instructions.  
Switching on  
Rear View Camera system with parking mode selection:  
1. Select the reverse gear.  
Or: Press the  
button.  
Switching off  
179  
Rear View Camera system with parking mode selection:  
1. The vehicle drives at more than approx. 9 mph (approx. 15 km/h).  
Or: Press the  
button.  
Parking (Rear View Camera system with parking mode selection)  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Safety instructions.  
Screen display  
Perpendicular parking: Guide lines help when parking in reverse perpendicular to the road.  
Parallel parking: Guide lines and boxes help when parking  
in reverse parallel to the road.  
Turn the steering wheel (parallel parking mode).  
Stop the vehicle (parallel parking mode).  
Cross traffic: Depiction of the  
area behind the vehicle and the areas to the side of the vehicle at a wide angle.  
Trailer or terrain assistance: Depiction of the area immediately behind the  
vehicle with a high zoom factor and guide lines.  
Red line: Boundary or safety distance from the vehicle.  
Red frame: Outline of the vehicle (parallel parking).  
Yellow lines: the vehicle's path based on the steering angle.  
Yellow assisting box: front or rear edge of the parking space (parallel parking)  
Green horizontal lines: Boundaries.  
Green line on the side: turning point when parking (parallel parking).  
Green frame: outline of the vehicle (parallel parking).  
Adjust the brightness, contrast, and color.  
Parking mode: Parking perpendicular to the road  
Fig. 123 Infotainment system: Parking perpendicular to the road.  
Searching for a parking space.  
Steering toward the selected parking space.  
Aligning the vehicle within the parking space.  
Road surface.  
Parking space.  
Side boundary of the parking space.  
Rear boundary of the parking space.  
1. Press the  
2. Tap the  
button or function key before driving past the parking space.  
function key in the Infotainment system to select the parking mode.  
3. Position your vehicle in front of the parking space fig. 123  
.
180  
4. Steer so that the yellow lines lead into the parking space. The green and yellow lines must align with the side boundary lines  
fig. 123  
.
5. Stop when the red line reaches the rear boundary fig. 123  
.
Parking mode: Parallel parking  
Fig. 124 Infotainment system: Parking parallel to the road.  
Searching for a parking space.  
Steering toward the selected parking space.  
Aligning the vehicle within the parking space.  
Road surface.  
Obstacle or assisting box.  
Side boundary of the parking space.  
Obstacle or assisting box.  
1. Press the  
2. Tap the  
button or function key before driving past the parking space.  
function key in the Infotainment system to select the parking mode.  
3. Turn on the turn signal for the corresponding side of the road.  
4. Position the vehicle at a distance of approximately 1 m (3 ft) parallel to the parking row. The yellow assisting boxes must cover the obstacles fig. 124  
o
. The area in between must be free of obstacles.  
5. Select the reverse gear. A red frame represents the target position of your vehicle fig. 124  
.
6. Turn the steering wheel until the red frame moves between the assisting boxes and becomes green fig. 124  
. Hold the steering wheel in this position while  
driving in reverse.  
If the steering wheel angle needs to change, one of the yellow side lines will become red. The  
steering wheel must be turned.  
steering wheel symbol indicates to the driver when the  
7. Drive slowly in reverse until the  
stop symbol appears or the green line aligns with the side boundary of the parking space fig. 124  
. An fig. 124  
arro  
indicates the remaining distance to be driven based on the number of displayed segments.  
8. Stop the vehicle. Steer in the opposite direction until the steering angle is reached and a direction arrow is no longer displayed.  
9. Keep driving in reverse until the  
stop symbol appears or until the red line reaches the rear boundary.  
Parking mode: Trailer support  
On vehicles with a trailer hitch installed at the factory, trailer support can be used for assistance when attaching the trailer to a draw bar.  
1. Tap the function key to select the parking mode.  
Colored guide lines help you with the maneuvering process.  
181  
Red lines: position of the trailer hitch.  
wheel angle.  
Green lines: distance to the trailer hitch.  
Orange line: predicted direction of the trailer hitch based on the steering  
Area View  
Introduction  
The Area View shows the entire vehicle  
environment in real time. This function  
helps you recognize obstacles in good  
time in situations where there might be  
blind spots.  
System function  
The system uses multiple cameras to create images of the vehicle environment, which are then displayed on the Infotainment system screen  
⇒
.
The functions and displays of the Area View may vary depending on the vehicle equipment, e.g. if Park Distance Control is available and is also displayed.  
WARNING  
The intelligent technology of the Park Distance Control (PDC) cannot overcome the natural laws of physics and it can only operate within the limits of the  
system. Not paying attention can result in accidents, serious injuries and vehicle damage.  
The PDC cannot replace the driver's attention.  
Switching on and off  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Safety instructions.  
Fig. 125 In the center console: Button for switching the Area View on and off.  
Switching on  
1. Select the reverse gear.  
Or: Press the  
button fig. 125.  
Switching off  
1. Drive faster than approx. 9 mph (approx. 15 km/h).  
Or: Press the button fig. 125.  
Changing the camera perspective  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Safety instructions.  
182  
Fig. 126 Infotainment system: screen display of Area View.  
Front camera.  
Rear camera.  
Switching between camera images  
1. Tap the function keys on the image border to select a display fig. 126.  
Sections of the screen  
Two sections of the screen will be shown in the Infotainment system fig. 126:  
Left screen The vehicle is displayed from a bird’s-eye view. By tapping on one section, the display changes to the right section of the screen.  
Right screen Depending on the section selected on the left screen, separate camera images will be displayed.  
3D view of the Area View  
A 3D view may be available, depending on the vehicle equipment.  
1. Swipe in the direction of the arrows on the screen to change the angle of the 3D view.  
Screen display  
Front perpendicular parking.  
Rear perpendicular parking.  
Front cross traffic.  
Rear cross traffic. Off-road.  
Display both areas next to the  
vehicle at the same time. Display the driver’s side only.  
Display the passenger's side only.  
Switch to trailer or off-road support (depending on the  
country).  
above.  
3D views.  
Switch to top view of the vehicle and surrounding area.  
Top view of the vehicle and surrounding area (3D view) from directly  
Vehicle and surrounding area from the side (3D view).  
Top view of the vehicle and surrounding area (3D view) from diagonally above.  
Park Assist  
Introduction  
Park Assist displays a suitable parking  
space and assists the driver when  
parking and leaving the parking space.  
System function  
Park Assist is an extension of the parking system.  
183  
Park Assist steers the vehicle into a parking space while you operate the accelerator pedal, the gears and the brake  
⇒
.
WARNING  
The intelligent technology of the Park Distance Control (PDC) cannot overcome the natural laws of physics and it can only operate within the limits of the  
system. Not paying attention can result in accidents, serious injuries and vehicle damage.  
Pay close attention to the parking process and the traffic. Keep an eye on the parking direction at the same time.  
In a hazardous situation, apply the brakes using the brake pedal.  
Available functions  
Display suitable parking spaces.  
Select parking mode.  
Driving into a suitable parallel parking space or parking bay.  
Driving out of a suitable parallel parking space.  
NOTICE  
Park Assist orients itself to parked vehicles, curbs, or other objects. Make sure that subjacent vehicle parts such as tires and rims are not damaged when  
parking.  
If necessary, press the brake pedal and end the parking process.  
Aftermarket accessories mounted on the vehicle, such as bicycle racks, can interfere with Park Assist and can cause damage.  
Automatic braking support may occur during parking processes if the driver accelerates too much.  
Driving with a trailer  
Park Assist cannot be activated if a trailer is connected to the electrical system.  
If the trailer hitch was not installed at the factory, Park Assist must be manually deactivated in trailer mode.  
Searching for parking spaces  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Safety instructions.  
Fig. 127 In the center console: Park Assist button.  
184  
Fig. 128 In the instrument cluster display: park modes for driving into parking spaces.  
Parallel parking in reverse.  
Cross parking in reverse.  
Cross parking driving forward.  
Searching for parking spaces  
1. Press the  
button fig. 127.  
The yellow indicator light turns on and the parking function is active.  
2. While paying attention to traffic around your vehicle, drive slowly past a row of parked vehicles.  
Park Assist will automatically search for a suitable parking space.  
Or: press the turn signal to look for a parking space on the opposite side of the road.  
If a parking space is found, a parking mode will be displayed fig. 128.  
3. If, for example, you would like to drive forward to park in a space at an angle to the road, press the  
button and select parking mode fig. 128  
.
Or: to select multiple parking spaces displayed in a row, press the  
button multiple times.  
WARNING  
There is the risk of an accident, if you open and use another function besides the parking function on the Infotainment system while maneuvering with the Park  
Distance Control or the Park Assist. If this happens, all active parking functions, including the audible warnings, are shut down. You will therefore no longer be  
warned about a possible collision or receive intervention.  
Do not use any other Infotainment system functions while maneuvering, other than the active parking function.  
Park Assist can be activated afterwards. If you drive past a suitable parking space, this will be indicated.  
Driving into parking spaces  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Safety instructions.  
185  
Fig. 129 In the instrument cluster display: parking perpendicular to the road.  
Searching for a parking space.  
Driving into a parking space.  
Maneuvering into a parking space.  
Prompt to drive forward.  
Your vehicle.  
Parking vehicle or obstacle.  
Detected parking space.  
Request to drive backwards.  
Request to brake.  
Progress bar (relative distance remaining).  
1. Stop the vehicle in front of or behind the parking space.  
2. Pay attention to the prompt for parking in the instrument cluster display fig. 129  
3. Engage reverse gear if a backwards arrow appears in the instrument cluster display.  
4. Release the steering wheel.  
.
5. Release the brake.  
6. Pay attention to the messages and indicators in the instrument cluster display.  
7. Accelerate carefully.  
8. Apply the brakes if a warning chime sounds, the  
indicator lights up, or a message appears on the instrument cluster display.  
9. At the end of a parking maneuver, always wait until Park Assist has completed all rotational movements of the steering wheel in order to achieve an optimum  
parking result ⇒  
.
10. Carry out several parking maneuvers if necessary.  
When the process of driving into a parking space is finished, a text message appears in the instrument cluster display.  
11. Park the vehicle ⇒ Parking.  
WARNING  
Turning the steering wheel too quickly can cause serious injuries.  
Do not grab the steering wheel during the maneuver until the system prompts you to do so.  
If the vehicle is approaching a dangerous situation, take over the steering.  
186  
Exiting a parking space  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Safety instructions.  
Fig. 130 In the instrument cluster display: reversing out of a parking space parallel to the road.  
Vehicle parking.  
Your vehicle.  
Progress bar (relative distance remaining).  
Direction of travel when driving out of a parking space.  
1. Press the  
button.  
2. Activate the turn signal for the side of the road where the vehicle should drive out of the parking space.  
3. Select the reverse gear.  
4. Let go of the steering wheel when the message Steering intervention active! Check surrounding area. is displayed.  
5. Accelerate carefully.  
6. Apply the brakes if a chime sounds, the  
indicator turns on, or once the prompt to drive forward appears in the instrument cluster display.  
7. Perform the procedure for exiting the parking space until a message appears in the instrument cluster display and possibly a tone signaling the end of the  
parking space exit procedure.  
8. Press the brake pedal until the steering movements from Park Assist have stopped or the  
9. Take over steering with the steering wheel at the angle already set.  
indicator in the instrument cluster display turns off.  
10. Drive the vehicle out of the parking space ⇒  
.
WARNING  
Only drive the vehicle out of the parking space when the traffic situation allows it.  
Rear Traffic Alert  
Rear Traffic Alert monitors the cross  
traffic when reversing out of a space or  
maneuvering.  
WARNING  
The intelligent technology of the Park Distance Control (PDC) cannot overcome the natural laws of physics and it can only operate within the limits of the  
system. Not paying attention can result in accidents, serious injuries, and vehicle damage.  
Pay attention to the traffic situation and the vehicle environment.  
The Rear Traffic Alert may potentially not detect all approaching objects, e.g. pedestrians or objects approaching quickly.  
Switching on and off  
187  
1. Press the  
button.  
Or: Depending on the vehicle equipment, press the button for driver assistance systems.  
Or: Depending on the vehicle equipment, open the vehicle settings in the Infotainment system ⇒ Vehicle settings menu.  
2. Switch Rear Traffic Alert on or off.  
System function  
Fig. 131 Rear Traffic Alert, general example: monitored area around the vehicle that is exiting a parking space.  
Fig. 132 Infotainment system: Rear Traffic Alert display (general example).  
The Rear Traffic Alert functions with radar sensors in the rear bumper.  
The system detects approaching or moving objects in the surrounding area to the rear and to the side and warns the driver if there is an obstacle fig. 131, ⇒  
If there is an obstacle, a warning signal will sound. Depending on the vehicle equipment, a color indication of the obstacle zone appears in the Infotainment  
system fig. 132 and/or a warning or indicator light appears in the instrument cluster along with a message.  
If the driver does not respond, automatic braking support may kick in.  
Obstacle detected.  
1. Beware of traffic behind the vehicle.  
Automatic braking intervention by Rear Traffic Alert.  
1. Press the brake pedal to bring the vehicle to a standstill.  
If Park Distance Control is deactivated, the driver cannot be sent any feedback. Rear Traffic Alert is also temporarily deactivated.  
Driving with a trailer  
Rear Traffic Alert cannot be activated if a trailer is connected to the electrical system.  
If the trailer hitch was not installed at the factory, Rear Traffic Alert must be manually deactivated when towing a trailer.  
188  
Braking assistance systems  
Information about braking assistance systems  
Braking assistance systems can assist the driver in critical driving and braking situations. The driver is always responsible for safe driving  
⇒
.
1. If a braking assistance system is regulating, continue braking with the necessary force. If necessary, steer the vehicle.  
WARNING  
The intelligent technology in the braking assistance systems cannot overcome the natural laws of physics and it can only operate within the limits of the system.  
Driving fast on icy, slippery, or wet roads can lead to loss of vehicle control and serious injuries to the driver and passengers.  
Always adapt your speed and driving style to the visibility, weather, road and traffic conditions. Do not take any risks.  
Braking assistance systems cannot prevent a collision, for example if you are driving too close to other vehicles.  
Always use suitable tires. Driving stability depends on the tires' ability to grip the road.  
Always keep the footwell beneath the pedals clear so that the brake pedal is unobstructed and can move freely.  
ESC, ABS and ASR only function correctly when all four wheels have the intended tires ⇒  
.
If the ABS malfunctions, the ESC, ASR and EDS also fail.  
When the ignition is switched on, the condition of the braking functions is automatically checked. The indicator lights will come on briefly and then turn off. If an  
indicator light remains on permanently, there is a malfunction. Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility immediately.  
Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
WARNING  
The effectiveness of the ESC can be reduced considerably if other components and systems that affect driving dynamics are not maintained correctly or are  
malfunctioning. This applies in particular to changes made to the suspension and any non-approved wheel and tire combinations.  
Ensure that conversion and modifications to the vehicle are only performed by an authorized Volkswagen dealer or authorized Volkswagen Service  
Facility. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Always use suitable tires. Driving stability depends on the tires' ability to grip the road.  
Electronic Stability Control (ESC)  
ESC is regulating the vehicle to reduce the risk of skidding and improve driving stability ⇒  
. The indicator light flashes yellow.  
Anti-Slip Regulation (ASR)  
ASR is regulating the vehicle to reduce the risk of the wheels spinning. The indicator light flashes yellow.  
ASR reduces drive power at wheels that are spinning and adapts the drive power to the road conditions. ASR makes it easier to start, accelerate, and drive up hills  
⇒
.
Anti-Lock Braking System (ABS)  
ABS prevents the wheels from locking during braking so that the vehicle can be steered  
⇒
.
Brake Assist System (BAS)  
BAS can help to reduce the vehicle braking distance. BAS increases braking power when the driver presses the brake pedal quickly in emergency situations  
⇒
Electronic Differential Lock (EDL and XDL)  
EDS automatically applies the brakes to a wheel that starts spinning and transfers the drive power to the other driving wheels.  
XDS is an extension of the electronic differential lock, and improves traction with braking support to help keep the vehicle in its lane.  
Multi Collision Brake  
The Automatic Post-Collision Braking System automatically brakes the vehicle if the airbag control module has detected a collision in an accident situation.  
Requirements for automatic braking:  
The driver does not press the accelerator pedal.  
Electronic braking distribution (EBD)  
The electronic braking distribution (EBD) regulates the braking force between the front axle and the rear axle, even outside of ABS regulation. Overbraking of the  
rear axle is avoided and the vehicle remains stable when braking.  
Electromechanical brake booster (eBB)  
189  
The electromechanical brake booster (eBB) supports the foot pressure only when the ignition is switched on and enhances the pressure applied to the brake pedal  
by the driver ⇒  
. In case of braking support by a driver assistance system, such as during control by the ACC or during emergency braking, the brake pedal ma  
move itself.  
After switching off the ignition, braking assistance will be gradually reduced. If the vehicle is still being held by the brake pedal, text messages will appear on the  
instrument cluster display. Brake support is limited in this case.  
Secure the stationary vehicle against rolling away → page , Parking.  
WARNING  
Driving without the brake booster or when the brake booster’s functionality is limited can increase the braking distance significantly, increasing the risk of  
accidents and serious injury.  
Never stop the engine or switch the ignition off while the vehicle is moving.  
If the brake booster is not working, you will need to press the brake pedal harder because the lack of braking assistance will increase the braking  
distance.  
Always keep the footwell beneath the pedals clear so that the brake pedal is unobstructed and can move freely.  
Switching the braking support system on and off  
Driving situations  
In order to avoid risks, the brake systems should not be switched off under normal conditions  
⇒
.
WARNING  
When ESC is switched off, the risk of the vehicle swerving is significantly higher. The vehicle can be difficult for inexperienced drivers to handle at high speeds.  
Accidents and serious injuries could result.  
Only switch off ESC if you are driving on a closed track and are experienced in sporty driving.  
Never take risks, and note the physical limits of the vehicle.  
Switching on and off  
1. Open the vehicle settings of the Infotainment system ⇒ Vehicle settings menu.  
2. Open the settings for parking systems.  
3. Select the function.  
If the driving situation no longer exists, the brake system should be switched on again completely ⇒  
.
ASR  
It can be helpful to switch off ASR when the vehicle is driven on loose ground or when “rocking” the vehicle out of place because it is stuck  
ASR manually switched off. The yellow indicator light turns on.  
⇒
.
ESC Off  
The function assists experienced drivers with sporty driving. The ESC is switched off and stabilizing interventions are not performed. Always read the safety  
instructions ⇒  
.
ESC manually switched off. The yellow indicator light turns on.  
Troubleshooting  
Electromechanical brake servo failure  
Do not continue driving!  
The red warning light turns on.  
A message is displayed if necessary. Press the brake pedal harder, as the lack of braking assistance will increase the braking distance.  
1. Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility for assistance.  
Electromechanical brake servo faulty  
The yellow indicator light turns on.  
A message is displayed for a few seconds.  
The brake pedal might pulse when pressed. Press the brake pedal harder, because the reduced braking assistance will increase the braking distance.  
190  
1. Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized Volkswagen dealer or  
authorized Volkswagen Service Facility.  
ABS failure or malfunction  
The yellow indicator light turns on.  
1. Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized Volkswagen dealer or  
authorized Volkswagen Service Facility.  
The vehicle can be braked without ABS.  
ESC malfunction  
The yellow indicator light turns on. ESC has been switched off.  
There is a fault or malfunction.  
1. Switch the ignition off and on.  
2. Drive a short distance at a speed of approximately 15 km/h (approx. 9 mph) to 20 km/h (approx. 12 mph).  
3. If the  
indicator light stays on, contact a suitably qualified professional. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized  
Volkswagen Service Facility.  
Noises in the braking assistance systems  
When the braking assistance systems are actively regulating, the brake pedal may move or noises may occur.  
1. Continue braking with the necessary force and, if necessary, steer the vehicle.  
WARNING  
If the  
brake warning light comes on together with the  
indicator light, the regulating function of the ABS could be malfunctioning. This could cause  
the rear wheels to lock relatively quickly when braking. Locked rear wheels can lead to loss of vehicle control.  
If possible, reduce your speed and drive slowly and carefully to the nearest authorized Volkswagen dealer or authorized Volkswagen Service Facility to  
have the brake system checked. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Avoid sudden braking or driving maneuvers.  
If the ABS indicator light does not turn off, or turns on during the journey, the ABS is not working correctly. The vehicle can only be stopped with the  
normal brakes (without ABS). The security provided by the ABS is not available. Visit an authorized Volkswagen dealer or authorized Volkswagen  
Service Facility as soon as possible. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
191  

Related Topics

Parking the vehicle Electronic parking brake Auto Hold Information about the parking systems Park Distance Control (PDC) Rear View Camera (Rear View) Area View Park Assist Rear Traffic Alert Braking assistance systems

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot