2017-2024 Volkswagen Arteon 4 Door Parking and maneuvering -> Auto Hold User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Parking and maneuvering -> Auto Hold for Your Volkswagen Arteon 4 Door First Generation (2017-2024)

release and the vehicle could start to move.  
Noises can be heard when the electronic parking brake is operated or checked after a longer period.  
Troubleshooting  
Holding force in the current situation is too low  
The red warning light  
is blinking.  
It is not possible to park the vehicle safely.  
1. Park the vehicle in another location or on a flat surface.  
/
Electronic parking brake malfunction  
The yellow central warning light comes on. The  
symbol with a message is additionally shown in the instrument cluster display.  
1. Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized Volkswagen dealer or  
authorized Volkswagen Service Facility.  
The electronic parking brake does not switch off  
The requirements for switching off the electronic parking brake are not met Electronic parking brake.  
The 12 V vehicle battery is drained Preparing and Performing a Jump-start.  
Auto Hold  
Fig. 120 In the center console: Auto Hold button (general example).  
Auto Hold secures the vehicle from  
rolling away when it is stationary,  
without having to hold the vehicle with  
the brake pedal.  
Depending on the vehicle equipment, your vehicle may feature the Auto Hold function.  
Requirements  
The driver door must be closed.  
The engine must be stopped.  
Auto Hold does not switch on or it switches off automatically if you shift into the N position. As a result, the vehicle will not be secured from rolling away  
.
Switching on  
1. Press the  
button fig. 120.  
The yellow indicator light in the  
button turns on.  
Auto Hold is ready to use, but the vehicle may not be kept stationary ⇒  
Auto Hold remains switched on after the ignition is turned on again.  
Keeping the vehicle stationary using Auto Hold  
.
1. When Auto Hold is switched on, bring the vehicle to a stop using the brakes.  
2. Release the brake pedal.  
The vehicle is kept stationary.  
173  
The hold on the vehicle will end when the vehicle starts to drive or the requirements for Auto Hold are not met.  
Switching off  
1. Press the  
button.  
The indicator light in the  
fig. 120 button turns off.  
The electronic parking brake switches on automatically to keep the vehicle stationary.  
However, if you press the brake pedal when switching off Auto Hold, the electronic parking brake will not switch on  
.
Temporary switch-off with the  
button  
It may be necessary to switch off Auto Hold temporarily, for example when maneuvering the vehicle to make it easier for the vehicle to roll.  
1. With the engine running, press the brake pedal.  
2. Press the  
button.  
Auto Hold is switched off.  
Auto Hold will switch on again once the brake pedal is pressed while the vehicle is stationary.  
WARNING  
The intelligent technology of Auto Hold cannot overcome the natural laws of physics and it can only operate within the limits of the system. Do not allow the  
increased convenience provided by Auto Hold to tempt you into taking risks.  
Make sure the indicator light for the electronic parking brake in the instrument cluster display lights up if the vehicle is to be kept stationary.  
Never exit the vehicle when the engine is running and Auto Hold is switched on.  
In some situations, such as when the ground is slippery or icy, Auto Hold will not be able to keep the vehicle stationary on hills or brake it adequately  
when going downhill.  
NOTICE  
Damage can result if the electronic parking brake switches on automatically in a car wash.  
Always switch off Auto Hold before going through a car wash.  
Information about the parking systems  
Safety instructions  
WARNING  
The intelligent technology of the Park Distance Control (PDC) cannot overcome the natural laws of physics and it can only operate within the limits of the  
system. Do not allow the increased convenience provided by the parking systems to tempt you into taking risks. The parking systems cannot replace the driver's  
attention.  
Always adapt your speed and driving style to the visibility, weather, road and traffic conditions.  
Always keep an eye on the parking direction and the vehicle surroundings. Pay particular attention to small children, animals and objects.  
Bear in mind that the parking system may not be able to react if the vehicle approaches too quickly and no warning is issued.  
Do not allow the parking system's display to distract you from the traffic around you.  
WARNING  
Camera lenses enlarge and distort the field of vision. Using the camera image to estimate the distance to people or obstacles may not be precise and can cause  
accidents and serious injuries.  
Do not rely on the camera system image.  
NOTICE  
In parking spaces without a curb, park at least 20 inches (50 cm) away from walls and buildings to reduce the risk of vehicle damage.  
Sensor and camera boundaries  
Various sensors and cameras that detect the vehicle surroundings ultrasonically, by radar waves, and visually are located on and in the vehicle. The various parking  
systems use different combinations of sensors. All sensors have technical and physical limits ⇒  
:
174  

Related Topics

Popular Owner Manuals