Safety belts -> Safety belt positioning for Your Volkswagen Atlas SUV First Generation (2018-2023)

2. Have the rear seat backrest locked into place in an upright position   
.
3. Grab the belt and pull it evenly over the chest and pelvis. Do not twist the belt while doing this  
.
4. Insert the buckle tongue securely in the safety belt buckle for that seat fig. 27.  
5. Pull on the safety belt to make sure the buckle tongue is latched correctly in the safety belt buckle.  
Unfastening the safety belt  
Fig. 28 Releasing the buckle tongue from the safety belt buckle.  
Only unfasten the safety belt while the vehicle is stationary ⇒  
1. Press the red button in the safety belt buckle fig. 28.  
The buckle tongue will pop out.  
.
2. Guide the belt back by hand so that the belt rolls up easily, the belt does not twist, and the trim panel is not damaged.  
WARNING  
Incorrect belt routing can cause serious or fatal injuries in the event of an accident.  
Optimum protection from the safety belts is only possible when the backrest is in an upright position and the safety belts are worn correctly according to  
the body size of the passenger.  
Unfastening the safety belt while driving can lead to serious or fatal injuries in the event of an accident or braking maneuver.  
Safety belt positioning  
Please read the introductory information and heed the Warnings and Notice   
Introduction.  
49  
Fig. 29 Correct safety belt positioning and correct head restraint adjustment.  
Safety belts only offer the optimum protection during a collision and reduce the risk of serious injury or death if they are fastened and positioned correctly. The  
correct safety belt position also holds the vehicle occupant in place so that the airbags can provide their maximum protection if they deploy. Therefore, all vehicle  
occupants should always fasten their own safety belts and make sure they are positioned correctly fig. 29.  
An incorrect seating position can cause severe or fatal injuries Seating position.  
Correct safety belt positioning  
The shoulder belt section of the safety belt must always be positioned over the center of the shoulder and never across the neck, above the arm, under the  
arm, or behind the back.  
The lap section of the safety belt must always lie across the lap and never over the stomach.  
The safety belt must always rest flat and securely on the body. Retighten the belt if necessary.  
Correct safety belt positioning for pregnant women  
Fig. 30 Correct safety belt positioning for pregnant women.  
For pregnant women, the safety belt must rest evenly across the chest and as low and flat as possible on the lap, so that no pressure is applied to the lower  
abdomen. This should be done throughout the entire pregnancy fig. 30.  
Adjusting the safety belt position to body size  
The belt positioning can be adjusted with the following equipment:  
Belt height adjusters for the front seats Safety belt height adjuster.  
Height-adjustable front seats Seating position.  
WARNING  
Incorrect safety belt positioning can cause serious injuries in the event of an accident or during sudden braking or driving maneuvers.  
Optimum protection from the safety belts is only possible when the backrest is in an upright position and the safety belts are worn correctly.  
50  
The safety belt itself or a loose safety belt can cause serious injuries if it shifts onto soft areas of the body, such as the stomach.  
The shoulder portion of the safety belt must lie over the center of the shoulder, and never under the arm or across the neck.  
The safety belt must lie flat and securely on the upper part of the body.  
The lap section of the safety belt must lie across the lap and never over the stomach. The safety belt must lie flat and securely on the lap. Retighten the  
belt if necessary.  
The lap belt section of the safety belt must sit as low as possible on the lap of pregnant women and lie flat under the “rounding” of the abdomen.  
Do not twist the safety belt while wearing it.  
Never hold the safety belt away from the body with your hand.  
Do not guide the safety belt over hard or breakable objects, such as eyeglasses, pens, or keys.  
Do not modify how the safety belt is routed using belt clips, retaining loops, or similar objects.  
Persons who cannot achieve the optimum belt routing due to physical conditions should contact an authorized Volkswagen dealer or authorized Volkswagen  
Service Facility about possible special modifications that can be used to achieve the best possible protection with the safety belt and airbags. Volkswagen  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Safety belt height adjuster  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
Fig. 31 Next to the front seats: safety belt height adjuster.  
You can use the safety belt height adjuster to adjust the safety belt routing in the shoulder area according to your individual body size, so that the safety belt can be  
correctly fastened:  
1. Push down and hold the safety belt height adjustment button in the direction of the arrows fig. 31.  
2. Slide the safety belt height adjuster upward or downward until the safety belt lies over the center of the shoulder Safety belt positioning.  
3. Release the safety belt height adjustment button.  
4. Pull hard on the safety belt to check that the safety belt height adjuster is engaged.  
WARNING  
Never adjust the safety belt height while driving.  
Automatic safety belt retractor, safety belt pretensioner, safety belt load limiter  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
The vehicle seat belts are part of the vehicle safety concept Airbag system. The vehicle safety concept has the following key functions:  
Automatic safety belt retractor  
Every safety belt is equipped with an automatic safety belt retractor on the shoulder belt section. If the safety belt is pulled slowly or while driving normally, the  
shoulder belt will be able to move freely. The automatic safety belt retractor blocks the safety belt from moving if the safety belt is pulled out quickly, for example  
during sudden braking maneuvers, when driving on hills, when driving around curves and when accelerating.  
Safety belt pretensioners  
51