Wheels and tires -> Handling rims for Your Volkswagen Atlas SUV First Generation (2018-2023)

Only replace old tires with tires that have been approved by Volkswagen for your vehicle model.  
Never use tires whose size exceeds the measurement of tires that are approved by Volkswagen  
.
Recalibrating the Tire Pressure Monitoring System  
The Tire Pressure Monitoring System must be recalibrated each time one or more wheels is replaced. This also applies if the tires are rotated, for example from fron  
to back Tire Pressure Monitoring System.  
WARNING  
Tires must have enough clearance from vehicle components. If there is not enough clearance, tires could rub against components of the suspension, the body,  
and the brake lines, which can cause the brake system to fail, the tread to separate, and the tire to fail.  
The actual dimensions of the tires must not exceed the dimensions of the tire manufacturers approved by Volkswagen, and the tires must not rub against  
other components of the vehicle.  
NOTICE  
Avoid strong impacts and drive around obstacles where possible. The risk of tire damage is especially great if driving over potholes and curbs. Damage to the  
tires and rims can result.  
NOTICE  
Do not damage the valves when replacing tires. Never drive without caps on the valves. The valves could be damaged.  
Always dispose of old tires correctly and according to regulations.  
If the spare wheel is different from the regular vehicle wheels, e.g. in the case of winter tires or a temporary spare wheel, only use the spare wheel temporarily  
and in the event of a breakdown, and drive especially carefully. Replace the compact spare wheel with a regular wheel as soon as possible.  
Using tires approved by Volkswagen ensures that the dimensions will fit correctly on your vehicle. If other tires are used, the seller must provide a certificate  
from the tire manufacturer stating that the tires are suitable for the vehicle. Keep the certificate stored safely in the vehicle.  
Handling rims  
Preventing damage to the rims  
Missing hubcaps can cause damage to the rims and wheel bolts.  
Missing hubcaps can cause damage to the rims and wheel bolts.  
Always install missing hubcaps before driving.  
Always drive over curbs and other low obstacles slowly and at a right-angle so that both front wheels come into contact with the obstacle at the same time.  
Replace missing dust caps on the valves immediately.  
Check the tire pressure regularly.  
Rims with bolted rim ring or accent elements  
Rims with a bolted rim ring or accent element consist of multiple pieces. These pieces are connected together with special bolts. Damaged rims must be replaced  
and may only be repaired by an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized  
Volkswagen dealer or authorized Volkswagen Service Facility.  
Rim identification  
In some countries, new rims must include information about certain properties. The following information may be on the rim:  
Seal of conformity  
Rim size  
Manufacturer or brand name  
Production date (month/year)  
Country of origin  
Serial number  
Raw material batch number  
Commodity code  
WARNING  
325  
Using unsuitable or damaged rims can impair driving safety and cause accidents and serious injuries.  
Only use rims permitted for the vehicle.  
Check the rims regularly for damage and replace them if necessary.  
WARNING  
Loosening and tightening bolts incorrectly on rims with bolted rim rings can cause accidents and serious injuries.  
Never loosen the bolts on rims with a bolted rim ring.  
Have all procedures on rims with bolted rim rings performed by an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Maintaining wheels and tires  
Tire pressure  
Checking the tire pressure  
Check the tire pressure at least once a month.  
Check the tire pressure only when tires are cold. The specified tire pressure only applies to a cold tire. The tire pressure on warm tires is higher than on cold  
tires. Therefore, never release air from a warm tire to adjust the tire pressure.  
Always adjust the tire pressures to the vehicle load ⇒  
.
After adjusting tire pressures, always screw the caps on the valves and note the information about the Tire Pressure Monitoring System (TPMS).  
Always use the tire pressures specified on the label. Never exceed the maximum tire pressure specified on the side of the tire.  
Fig. 197 On the driver door pillar: Tire inflation pressure label.  
The correct tire pressure for the tires fitted at the factory can be found on a label on the B-pillar of the driver door fig. 197. The factory-installed tires can be winter  
summer or all-season tires.  
An incorrect tire pressure can cause increased tire wear, negatively affect driving behavior and damage tires. Compliance with the correct tire pressure is very  
important, particularly when driving at high speeds.  
The specified tire pressure is given for a cold tire. For warm tires, the pressure is higher.  
Never reduce the pressure of a warm tire in order to reach the specified value. This will cause the actual pressure when the tire is cold to be too low.  
WARNING  
Incorrect tire pressures can cause tires to suddenly lose air or go flat while driving. This can cause accidents and fatal injuries.  
If the tire pressure is too low, the tire can heat up so much while driving that the tread separates or the tire ruptures.  
Excessive speeds and vehicle loads can cause overheating, sudden tire damage (including tire blow-outs), and separation of the tread, which can then  
result in loss of vehicle control.  
An incorrect tire pressure shortens the service life of the tire and negatively affects driving behavior.  
Check the tire pressures regularly, at least once a month and also before driving long distances.  
All tires must always be inflated to the correct pressure based on the load.  
Never reduce the tire pressure when tires are warm.  
NOTICE  
326