Do it yourself -> Replacing fuses for Your Volkswagen Atlas SUV Second Generation (2024-2025)

1. To lift a windshield wiper arm, hold it only in the area where it attaches to the wiper blade.  
2. Lift the wiper arm and fold it out.  
3. Press and hold the release button fig. 151  
.
4. Tilt the wiper blade toward the wiper arm fig. 151  
while removing it in the direction of the arrow  
. You may need t  
use more force to do this.  
5. Slide a new wiper blade with the same length and design onto the wiper arm in the opposite direction to the arrow until it  
engages fig. 151 . For this to work, the wiper blade has to be folded out fig. 151  
.
6. Place the wiper arm carefully on the rear window.  
WARNING  
Worn or dirty wiper blades reduce visibility and increase the risk of accidents and serious injuries.  
Always clean dirty wiper blades.  
Always replace wiper blades if they are damaged or worn and are no longer cleaning the window glass sufficiently.  
NOTICE  
Cleaning wiper blades or door windows with unsuitable cleaning agents may cause damage.  
Do not clean the wiper blades and windshield and windows with fuel, nail polish remover, paint thinner, or other  
similar fluids.  
Do not clean the wiper blades with rough sponges or other sharp objects.  
If there is wax residue on the windshield and rear window from car wash systems and other products, this can cause the  
windshield wipers to rub. Remove any wax residue with a special cleaner or cleaning towels.  
Exterior lighting  
Exterior lighting using LED technology  
The exterior lighting uses LED technology. It is not possible to change LEDs by yourself. The malfunction of individual LEDs  
may be an indication that more will malfunction. If this is the case, have the lights checked and replaced if necessary by an  
authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized  
Volkswagen dealer or authorized Volkswagen Service Facility.  
Driving with exterior lighting that is inoperative may be against the law.  
WARNING  
If the vehicle lighting is not used appropriately for the weather conditions, the road will not be illuminated sufficiently. The  
vehicle will not be visible to other road users or will be difficult to see. This can cause accidents and serious or fatal  
injuries.  
Regularly check the lighting equipment of the vehicle.  
Have the vehicle lighting system repaired immediately, when necessary.  
Replacing fuses  
381  
Introduction  
Due to the constant development of the vehicle, equipment-dependent fuse allocations, and the combined protection of  
multiple electrical equipment items using one fuse, a complete overview of the fuse layout is not available at the time of print.  
Detailed information about fuse allocations can be obtained from suitably qualified professionals. Volkswagen recommends  
contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Generally, multiple electrical equipment items can be protected together through by fuse. On the other hand, some equipment  
items may use multiple fuses.  
Only replace fuses if the cause for the malfunction has been fixed.  
1. If a new fuse blows again after a short time, have the electrical system checked by suitably qualified professionals.  
Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
WARNING  
The high voltage in the electrical system may cause electric shocks and severe burns. Contact with electric wires in the  
ignition system may result in serious or fatal injuries.  
Never touch the electrical wires in the ignition system.  
WARNING  
Using unsuitable fuses, repairing fuses or bridging a circuit without fuses can lead to serious damage or a fire in the  
vehicle. This could result in serious or fatal injuries.  
Replace fuses only with fuses of same rating and size. Make sure that the color and label are identical to the faulty  
fuse.  
Never repair fuses.  
Never use metal strips, paper clips or similar objects as substitutes for fuses.  
NOTICE  
Changing a fuse when the ignition is switched on, the engine is running, the light is switched on, or other electrical  
equipment is switched on could cause damage to the electrical system.  
Switch off the engine and turn off the light and other electrical equipment.  
Make sure that the engine cannot be started while a fuse is being replaced.  
NOTICE  
If a fuse is replaced by another fuse with a higher amp rating, this could also damage the vehicle's electrical system in  
another location.  
Never replace a fuse with a fuse that has a higher current rating.  
NOTICE  
Dirt and moisture in the fuse boxes can damage the electrical system.  
Protect open fuse boxes from dirt and moisture.  
382  
Avoid short circuits in the electrical system.  
Check that the fuse box covers are tightly sealed again and are not damaged.  
There are other fuses in the vehicle. These should only be replaced by an authorized Volkswagen dealer or authorized  
Volkswagen Service Facility qualified in this respect. Volkswagen recommends contacting an authorized Volkswagen dealer  
or authorized Volkswagen Service Facility.  
Fuses in the hood space  
Please read the introductory information and heed the Warnings and Notice   
and Introduction.  
Opening the fuse box in the hood space  
Fig. 152 In the hood space: fuse box (general example).  
Fuse box cover.  
The plastic pliers for removing fuses can be found on the inside of the fuse box cover or on the fuse panel.  
Removing the cover  
1. Open the hood.  
2. Press the catches in the direction of the arrow to unlock the fuse box cover fig. 152  
.
3. Remove the cover upward.  
Fitting the cover  
1. Place the cover onto the fuse box.  
2. Push the cover downwards until it audibly clicks into place on both sides.  
Overview of Fuses in the Hood Space  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Introduction.  
383