2003-2015 Volkswagen Caddy SUV Legislative and technical conditions for converting wheel and tyre combinations -> Additional wheel housing extensions (flaps) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Legislative and technical conditions for converting wheel and tyre combinations -> Additional wheel housing extensions (flaps) for Your Volkswagen Caddy SUV Third Generation (2003-2015)

Amarok 2011 ➤ , Caddy 2004 ➤ , Caddy 2011 ➤ , Caddy Kasten/Kombi 1996 ➤ ...  
Wheels and Tyres Guide - Edition 01.2011  
Tubeless radial tyres may only be fitted to rims with a safety  
hump feature on the shoulder.  
If the wheel and tyre combinations listed are used, the asso‐  
ciated tyre inflation pressures must be adhered to. The tyre  
inflation pressure for summer tyres can be found on the sticker  
on the inside of the tank flap or in the tables of the individual  
vehicles.  
Sufficient clearance to the wheels and tyres at parts of the  
wheel housing, suspension and braking system is assured if  
the notes and specifications established in the parts certificate  
are observed in all operating conditions.  
Unless otherwise stated, snow chains may only be fitted to the  
drive wheels.  
The same sized wheels and tyres must be used at the front  
and rear of the vehicle. On vehicles with all-wheel drive, tyres  
must be of the same manufacturer and have the same tread  
profile.  
2.3  
Additional wheel housing extensions  
lk  
(flaps)  
For technical reasons some vehicles require wheel housing ex‐  
tensions (flaps) on the wing or bumper -arrows- when using  
certain wheel and tyre combinations.  
Please check if there is a requirement to remove the flaps.  
The information is located in the overview table for the respective  
vehicle.  
2.4  
„Series 80“ tyres  
Tyres of the „80“ series (e.g. 145/80 R 13 74 S) will replace the  
„82“ series (e.g. 145/82 R 13 74 S). Legislation stipulates that „82“  
series tyres may be replaced by „80“ series tyres without having  
been entered in the vehicle documents.  
The condition for this is that the „80“ series tyres have the same  
width are of the same type – cross-ply or radial belted – and have  
the same or higher load index.  
If only „80“ series tyres are entered in the vehicle documents, „82“  
series tyres may only be used if an entry has been made in the  
vehicle documents.  
4
Rep. gr.44 - Wheels, tyres, vehicle geometry  

Related Topics

Popular Owner Manuals