Lights and Vision -> Switching parking lights on and off for Your Volkswagen Caddy SUV Fifth Generation (2020-2025)

If the camera's field of view is dirty, covered or damaged, the function of the main beam assist may be impaired.  
This also applies if changes are made to the vehicle's lighting system, for example if additional headlights are  
fitted.  
NOTICE  
Please observe the following points in order to avoid impairing the proper function of the system:  
Regularly clean the camera's field of view, and keep it free from snow and ice.  
Do not cover the camera's field of view.  
Regularly check the area of the windscreen that is in the camera's field of view for damage.  
Light-emitting objects in the camera's field of operation, e.g. mobile navigation devices, could impair the  
functions of the main-beam control (Light Assist).  
Switching parking lights on and off  
Fig. 1 On the left-hand side of the steering column: Turn  
signal and main beam lever  
Switching on parking light on one side of the vehicle  
When the parking lights are switched on, the headlight with side light and parts of the tail light cluster on the  
corresponding side of the vehicle light up.  
Switch off the ignition.  
Move the turn signal and main beam lever from the centre position to the following position→ Fig. 1:  
A
Right-hand parking light is switched on.  
Left-hand parking light is switched on.  
B
Continuous parking light on both sides of the vehicle  
Both headlights light up with side lights as well as parts of the tail light clusters if continuous parking light on both  
sides of the vehicle is switched on:  
Switch on the parking lights on.  
Switch off the ignition.  
Lock the vehicle from outside.  
Automatic switch-off of side lights and parking lights  
The vehicle will detect a weak 12-volt vehicle battery and switch off the side lights or parking lights in good time so  
that the engine can still be started – however, this will occur after two hours at the earliest.  
If there is insufficient battery capacity for the side lights and parking lights to remain switched on for two hours, this  
150  
can discharge the 12-volt vehicle battery to such an extent that it will no longer be possible to start the engine →  
.
WARNING  
Accidents and serious injuries can occur if the vehicle is parked without sufficient illumination, as other road users  
might have difficulty seeing the vehicle, or may not see it at all.  
Always park the vehicle securely and with sufficient lighting. Observe any applicable local legislation.  
If the vehicle lighting is required for several hours, switch on the right or left parking light if possible. The  
activation duration of the one-sided parking light is generally double that of the continuous parking light on both  
sides.  
NOTICE  
If the side lights or parking lights are used, the vehicle battery will discharge itself. To make it possible for the  
engine to be restarted, the side lights or parking lights are switched off automatically to preserve the charge state  
of the vehicle battery.  
If you cannot start the engine, you may want to seek assistance to help you jump start the vehicle and have the  
battery checked by a qualified workshop.  
Coming Home and Leaving Home function (orientation lighting)  
The “Coming home” and “Leaving home” function lights up the area immediately surrounding the vehicle when you  
get in or out of the vehicle in darkness.  
The Coming Home and Leaving Home function is controlled automatically by a light sensor.  
The switch-off delay can be set and the function activated or deactivated in the vehicle settings in the Infotainment  
system (→ Vehicle settings menu).  
Activating the “Coming Home” function  
Switch off the ignition.  
The “Coming Home” lights are switched on when automatic lighting control  
detects darkness.  
is switched on and the light sensor  
The switch-off delay starts when the last vehicle door or the tailgate is closed.  
Deactivating the “Coming Home” function  
Automatically after the set switch-off delay has elapsed.  
OR: Automatically if a door or the tailgate is opened approximately 30 seconds after switching on.  
OR: Press the light switch as often as necessary until the setting is displayed in the instrument cluster.  
OR: Switch on the ignition.  
Activating the Leaving Home function  
Unlock the vehicle when automatic lighting control  
is switched on and the light sensor detectsdarkness.  
Deactivating the Leaving Home function  
Automatically after the switch-off delay.  
OR: Lock the vehicle.  
OR: Press the light switch as often as necessary until the setting is displayed in the instrument cluster.  
OR: Switch on the ignition.  
151