Practical equipment -> Sockets in the vehicle for Your Volkswagen Caddy SUV Fifth Generation (2020-2025)

Sockets in the vehicle  
Fig. 1 12-volt socket with cover flap 1 , 12-volt socket  
with pull-out cover 2 .  
Fig. 2 Fold-out 230-volt socket with earthing contact  
(illustration).  
To prevent damage due to voltage fluctuation, switch off any connected devices before switching the ignition or  
engine on or off.  
Maximum power rating  
Electrical socket  
12-volt  
Maximum power rating  
120 watts  
230-volt  
300 watts (450 watts peak power)  
If two or more devices are connected at the same time, the overall power consumption of all connected electrical  
devices must never exceed 300 watts  
.
The maximum power rating of the individual sockets should never be exceeded. The power rating of each device is  
stated on its type plate.  
12-volt socket  
The sockets also work when the ignition is switched off→  
.
Using electrical appliances with the engine switched off and the ignition switched on will drain the battery.  
12-volt sockets can be found in the following locations in the vehicle:  
283  
Stowage compartment in the dash panel (→ Driver side).  
Centre console (→ Centre console).  
In the luggage compartment or in front of the third row of seats.  
230-volt socket with earthing contact  
The 230-volt socket with earthing contact can be found in the following locations in the vehicle→ Fig. 2:  
On the partition between the passenger area and luggage compartment.  
Rear centre console.  
The socket is activated automatically as soon as a plug is connected when the engine is running. If there is sufficient  
energy in the system, the socket can also be used when the engine is off →  
.
Connecting electrical equipment: Open cover and insert the plug all the way into the socket to unlock the  
integrated child protection device. Electricity will not flow until the child socket protection has been unlocked.  
LED display on the socket  
Constant  
green  
The child lock is disengaged. The socket is ready for use.  
light:  
Flashing  
green  
The ignition is switched off but there is still sufficient energy available to continue to supply the  
socket with power for up to ten minutes. If the plug is removed during this time, the socket switches  
off and cannot be re-used until the ignition is switched on again.  
light:  
Flashing  
red  
There is a malfunction such as a shutoff due to excess current or temperature.  
light:  
Temperature switch-off  
The inverter in the 230-volt socket with earthing contact will switch off automatically if the temperature exceeds a  
specific value. The switch-off function prevents the connected device from overheating when the power  
consumption is too high or if the ambient temperature is too high. The 230-volt socket with earthing contact cannot  
be used again until after the cool-down phase.  
The plug on the connected device must first be removed and then reinserted before using the 230-volt socket with  
earthing contact again after the cool-down phase. This helps prevent the connected electrical devices being switched  
on accidentally.  
DANGER  
High voltage in the electrical system!  
Never pour any liquid over the socket.  
Do not plug adapters or extension cables into the 230-volt socket with earthing contact. Otherwise the built-in  
child lock will disengage and power will be supplied to the socket.  
Do not insert any items which will conduct electricity, such as knitting needles, into the contacts of the 230-volt  
socket with earthing contact.  
NOTICE  
Observe the operating instructions for any device that you plug into the socket.  
12-volt socket:  
Only use accessories that have been approved in accordance with valid guidelines concerning electromagnetic  
284