Wireless charging function
Fig. 1 Diagram: shelf with lining mat for the wireless
charging function.
The wireless charging function comes with some equipment levels and is not available in all countries.
The wireless charging pad is located in the centre console.
In some vehicles, the lining mat has a telephone symbol which marks the centre of the wireless charging function
1
→ Fig. 1
.
The wireless charging function enables wireless energy transmission by electromagnetic induction over a short
distance.
The maximum charging power is 5 watts.
The Qi standard enables wireless charging of suitable Qi-enabled mobile devices.
To find out whether a mobile device supports the Qi standard, please consult its operating instructions. The
manufacturer of the mobile device can provide further advice on compatibility.
Place only one Qi-enabled mobile device without a protective cover with maximum dimensions(width x length) of
80 mm x 160 mm (3.15 in x 6.299 in) flat on the wireless charging pad.
Before charging a mobile device, remove foreign objects with metal parts such as coins and keys from the pad, and
follow the operating instructions for the mobile telephone.
To charge a Qi-enabled mobile device, place a suitable mobile device without protective cover with the display facing
upwards flat on the shelf so that the entire surface is in contact with the lining mat. The charging process will start
automatically.
The factory-fitted Infotainment system will provide information about the start of the charging operation and, where
applicable, about any foreign objects with metallic components, such as coins and keys, that are detected in the
stowage compartment. Remove foreign objects immediately.
If the mobile device has not been placed correctly or its dimensions are too large, it cannot be detected or detected
correctly. The Infotainment system may report that there is a foreign object on the shelf. If a suitable mobile device is
being used, this problem can be solved by correcting its position.
Qi-enabled mobile devices that are too large in their dimensions cannot be charged using the wireless charging
facility.
Declaration of Conformity “Wireless charging function”
Molex CVS Dabendorf GmbH declares that the WCH-185 radio equipment type complies with the Directive
2014/53/EU. The complete text of the EU declaration of conformity is available at the following web address:
“http://”
277
English 
