Using seat belts
Checklist
Using the seat belts→ Using seat belts:
✓ Check the condition of all seat belts regularly.
✓ Keep the seat belts clean.
✓ Avoid allowing any foreign bodies or fluids to get on to the seat belt or latch plate or into the slot for the seat belt
buckle.
✓ Do not trap or damage the seat belt and latch plate, for example when closing the door.
✓ Never remove, modify or repair the seat belt or any part of the belt fixture system.
✓ Always fasten the seat belt correctly before every journey and keep it fastened while the vehicle is in motion.
Twisted seat belt
If it is difficult to remove the seat belt from the belt guide, the seat belt may have become twisted if it was returned
too quickly into the side trim:
—Take hold of the latch plate then slowly and carefully pull out the seat belt.
—Untwist the seat belt and guide it back slowly by hand.
Fasten the seat belt even if you are unable to undo the twist. However, the twist should not be in part of the seat belt
that comes into direct contact with the body. The twist should be corrected immediately by a qualified workshop.
WARNING
Using seat belts incorrectly increases the risk of severe or fatal injuries.
● Regularly check to see if the seat belt and its related parts are in perfect condition.
● Always keep the seat belt clean.
● Do not allow the belt webbing to become jammed, damaged or to rub on any sharp edges.
● Always keep the latch plate and slot in the buckle free from foreign bodies and liquids.
59
English 
