Trailer towing -> Technical prerequisites for Your Volkswagen Caddy SUV Fifth Generation (2020-2025)

WARNING  
The start/stop system must always be deactivated manually when towing a trailer using towing brackets that have  
not been retrofitted by Volkswagen Commercial Vehicles. Otherwise faults can occur in the brake system, possibly  
resulting in accidents and serious injuries.  
Always switch off the anti-theft alarm when a trailer is being hitched or unhitched (→ Anti-theft alarm). The  
tilt sensor could otherwise trigger an alarm unnecessarily.  
In vehicles with a new engine, do not tow a trailer during the first  
1,000 km.  
The removable ball coupling neck is required for towing. Make sure you always carry the ball coupling neck in  
the vehicle .  
Technical prerequisites  
Engine cooling system  
There is an increased load on the engine and the cooling system when towing a trailer. The cooling system must  
contain sufficient coolant and be able to cope with the extra load added by the trailer.  
Trailer brake  
If the trailer is equipped with its own brake system, comply with the legal regulations.  
Exterior mirrors  
If you are unable to see the traffic behind the trailer in the vehicle's standard exterior mirrors, additional exterior  
mirrors should be fitted in accordance with any country-specific regulations. Before setting off, adjust the mirrors so  
that you have a sufficient view of the rear.  
Retrofitting a towing bracket  
Only use a towing bracket which has been approved by Volkswagen Commercial Vehicles for your vehicle. Always  
check and follow the data provided by the towing bracket manufacturer.  
Towing brackets fitted to the rear bumper  
Do not carry out any alterations to the exhaust or brake systems. Check that the towing bracket is properly secured at  
regular intervals.  
Trailer tail light clusters  
The trailer tail light clusters must work correctly and meet legal requirements. Do not exceed the maximum power  
consumption for the trailer tail light clusters.  
WARNING  
If the towing bracket is unsuitable or incorrectly fitted, the trailer could become detached from the towing vehicle.  
This can cause serious accidents and fatal injuries.  
Do not carry out any alterations to the exhaust or brake systems.  
358  
NOTICE  
The vehicle electronics may be damaged if the trailer's power consumption is too high.  
Never connect the trailer's electrical system directly to the electrical connections of the tail lights or to other  
sources of electricity. Only use suitable connectors to provide power to the trailer.  
Towing a trailer places additional demands on the vehicle. Volkswagen Commercial Vehicles recommends  
additional services between the normal inspection intervals if the vehicle is used frequently for towing a  
trailer.  
Fitting the removable ball coupling neck  
Fig. 1 Overview: Removable ball coupling neck.  
1
2
3
4
5
6
7
8
9
Cap  
Ball coupling  
Retaining balls  
Catch for locking element  
Centring device  
Shank  
Lock cap  
Keys  
Handwheel  
10 Gap (pre-tensioned ball coupling neck)  
11 White marking on the ball coupling neck  
12 Green marking on handwheel  
13 Red marking on handwheel  
The removable ball coupling neck is located in a stowage box under the right-hand front seat.  
359