Closing the submenu or telephone book
The display always switches back one level, i.e. from a submenu to the telephone book and from the telephone book
to the PHONE main menu.
1. Press the function button under
.
Or: Press PHONE to access the PHONE main menu directly.
Voice control mode menu
If the paired and connected mobile telephone has “voice control mode”, this function can be called up via the
function button under .
1. Press the function button under .
The communication channel to the mobile telephone is opened.
2. Follow the instructions on the mobile telephone.
Introduction
Observe the Safety chapter (→ General information on Infotainment system).
Some external devices can be paired with the Infotainment system using wired and wireless connections, if available
in the vehicle.
The type and number of media drives and wired and wireless connections differ according to the equipment level and
country. The connections may also be different within a model series or in special-edition models.
In the case of cable connections, use only the original device connecting cables or, if available, the factory-supplied
connecting cables for your vehicle.
If the adapter or plug on the connecting cable cannot be inserted, check the angle of insertion and the connections.
Only supported audio files are displayed. Other files are ignored (→ Media).
NOTICE
Use only suitable and undamaged connecting cables for wired connections.
● When inserting the adapter and plug of the connecting cable into the appropriate port, ensure that they are
correctly positioned and apply only light pressure. Applying too much pressure may damage both the unit
connection and the adapter or plug of the connecting cable.
● Make sure that the connecting cable is not pinched or sharply bent.
● Using unsuitable or damaged connecting cables and adapters may damage devices and cause them to
malfunction.
If a connected device is not recognised, disconnect all devices and connect the device again. If necessary,
check that the connecting cable you are using is working properly.
If a connected device malfunctions, restart the device. In some cases this will remedy the
fault.
376
English 
