Changing the windscreen wiper blades
—Move the wiper arms to the service position before lifting (→ Wiper blades, Operation).
—When lifting a wiper arm, hold it only in the area of the wiper blade mounting.
—Press and hold the release button and simultaneously pull off the wiper blade in the direction
of the arrow → Fig. 1 1 .
—Insert a new wiper blade with the same length and design onto the wiper arm. Push it on until
it engages.
—Place the wiper arms carefully back onto the windscreen.
Changing the wiper blade for the rear window
—When lifting a wiper arm, hold it only in the area of the wiper blade mounting.
—Lift and fold back the wiper arm.
—Press and hold the release button → Fig. 2 1 .
—Tilt the wiper blade in the direction of the wiper arm → Fig. 2 (arrow A ) and pull it off in the
direction of the arrow B at the same time. You may need to use some force to do this.
—Insert a new wiper blade with the same length and design onto the wiper arm against the
direction of the arrow. Push it on until it engages → Fig. 2 (arrow B ). The wiper blade must
be in the folded back position → Fig. 2 (arrow A ).
—Carefully place the wiper arm back onto the rear window.
WARNING
Worn or dirty windscreen wiper blades reduce visibility and increase the risk of accidents and
severe injuries.
●
Always change wiper blades if they are damaged or worn and no longer clean the window
properly.
NOTICE
Damaged or dirty wipers can scratch the windows.
●
Do not use any detergents containing solvents, hard sponges and other sharp objects, as
they can damage the graphite coating of the wiper blades during cleaning.
●
Do not use fuel, nail varnish remover, paint thinner or similar products to clean the windows.
Wax deposits on the windscreen and rear window could cause the wiper blades to rub.
Remove wax residue using a special cleaning product or cleaning cloths.
English 
