Troubleshooting
Turn signal indicator lamp
The indicator lamp flashes green.
If a turn signal on the vehicle has failed, the indicator lamp will start flashing twice as fast.
—Check the lighting and change the appropriate bulb as required (→ Exterior lighting,
Introduction/General information).
—If the fault persists, seek expert assistance.
Vehicle lighting failure
The indicator lamp lights up yellow.
Vehicle lighting not working partially or completely.
—Check the lighting and change the appropriate bulb as required (→ Exterior lighting,
Introduction/General information).
—If the fault persists, seek expert assistance.
Rain/light sensor fault
The indicator lamp lights up yellow.
In the light switch position
, the vehicle lighting is not switched on or off automatically.
—Switch the ignition off and on.
—If the fault persists, seek expert assistance.
Dynamic cornering light
The dynamic cornering light does not work when travel mode is activated (→ Exterior drive
lighting, Setting).
A corresponding display appears in the instrument cluster if there is a dynamic cornering light
fault. Go to a qualified workshop.
Advanced main-beam control
Advanced main-beam control will respond in the same way as the normal main-beam control
and switch main beam on or off automatically in the following situations:
—If the dynamic cornering light has been deactivated.
—If travel mode is activated (→ Exterior drive lighting, Setting).
—When the Eco driving profile is selected in the driving profile selection (→ Driving profile
selection, Introduction/General information).
English 