FOX 2004 ➤
3 - Cyl. injection engine - Edition 12.2009
– Adjust engine supports with no tension.
Note
Tightening torque for the assembly ⇒ page 8 .
– Install drive shaft: ⇒ Chassis; Rep. Gr. 40 ; Front suspension .
Vehicles with air conditioning
– Install air conditioning compressor: ⇒ Heating - ventilation ;
Rep. Gr. 87 ; Air conditioning .
Continued for all vehicles.
– Electrical connections and installation: ⇒ Current flow dia‐
grams, Electrical fault finding and Fitting locations.
– Install Poly-V belt ⇒ page 13 .
– Install clutch actuator hydraulic cylinder: ⇒ Automatic/me‐
chanical transmission; Rep. Gr. 30 ; Clutch - control system .
– Install transmission gearshift command ⇒ Automatic / me‐
chanical transmission; Rep. Gr. 34 ; Drive, housing .
Continued for all vehicles.
– Fill cooling system ⇒ page 56 .
– Install air filter set ⇒ page 91 .
– Adapt Engine control unit -J623- to the Accelerator butterfly
valve control unit -J338- ⇒ Vehicle diagnosis, testing and in‐
formation system VAS 5051.
lk
– Perform test drive and check fault memory ⇒ page 102 .
1.4
Tightening torques
Location
Tightening tor‐
que
Screws and nuts
M 6
M 8
M 10
M 12
10 Nm
20 Nm
45 Nm
60 Nm
40 Nm
Exhaust tube to manifold
Support for the power-drive group
Note
The power-drive group support fastening screws are expansion
screws and must be mandatorily replaced.
WARNING
Always replace self-locking nuts and screws subject to angular
torque
8
Rep. Gr.10 - Cylinders, engine block, support, protector
English 
