Jump-start terminal
Fig. 188 In the engine compartment: Negative jump-start terminal -
ꢀ Please first read and note the introductory information and heed the WARNINGS
The jump-start terminal for connecting the black jump-start cable is in the engine compartment
⇒ fig. 188 (–).
The vehicle can only be jump-started or be used to jump-start another vehicle via this jump-start
terminal.
Using jumper cables
Fig. 189 Diagram for attaching the jumper cables: Dead battery 1 and booster battery 2.
ꢀ Please first read and note the introductory information and heed the WARNINGS
The dead battery must be properly connected to the vehicle's electrical system.
Make certain that the vehicles are not touching each other. Otherwise, electric current could flow as
soon as the positive terminals (+) are connected. Use longer jumper cables if necessary.
The clamps on the jumper cables must have good contact to bare metal on the battery terminals.
If the engine does not start, stop the process after 10 seconds and repeat after about 1 minute.
English 
